Lanberg NC-1200-WIE is a wireless USB 3.0 network card supporting the AC1200 standard, offering stable connections in the 2.4 GHz and 5 GHz bands, with a maximum speed of up to 1200 Mbps. Thanks to the external detachable antenna with a gain of 5 dBi, it provides excellent range and connection reliability, ideal for streaming 4K video, online games and fast downloading of large files

Ring light with 24 RGB diodes WS2812B type controlled by serial signal. The module can be powered with the voltage from 3.3 V to 5 V, only one signal line is required to control it. DFRobot DFR0888-24

Module with 8 inputs for data acquisition from 0-24 mA analog current inputs. It communicates via RS485 interface and supports Modbus RTU protocol. The board is enclosed in an industrial enclosure. GM1008

Waveshare 5.79" (G) with included controller module is a four-color e-paper display designed for static content presentation with minimal power consumption. It works perfectly as an electronic shelf label, asset tag, information panel, or conference badge. Thanks to the included driver and compatibility with popular development platforms, it is a ready-to-integrate solution for projects requiring visual appeal and energy efficiency.

32bit ARM Cortex-M0, 24K Flash, 8K RAM, LQFP48, RoHS

Module with a PIR motion sensor. It allows you to detect movement at a distance of up to 8 meters with a viewing angle of 60°. DFRobot SEN0522

Step-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 15 V and a maximum input of up to 2 A. Pololu 4946

Lanberg\'s Cat.6A patch cord, 150 cm long, guarantees high throughput up to 500 MHz thanks to the copper-plated material (CCA) and S/FTP shielding. The white cable, tested by Fluke, combines reliability with an aesthetic appearance, ideal for advanced ICT networks. Lanberg PCF6A-10CC-0150-W

The 7-color ACeP e-Paper display has a diagonal of 7.3" and a resolution of 800x480 px. Communicates via SPI interface. No PCB. Waveshare 7.3inch e-Paper (F)

The power module is designed for the MyoWare 2.0 muscle tension sensor. Equipped with a LiPo battery, it allows you to build portable devices. SparkFun DEV-18427

Module designed to operate four incremental encoders. It reads the encoder rotation and transmits the information via the I2C interface. Adafruit 5752

Module with BME280 environmental sensor. It allows you to measure temperature, humidity and pressure. The sensor is equipped with two communication interfaces: SPI and I2C. SparkFun SEN-13905

Optical rain sensor module for detecting the state of rainfall on glass. It is configured via the UART interface and returns rain intensity information via this bus. DFRobot SEN0545

Full/Low Speed 2.5 kV USB Digital Isolator,16-Lead SOIC, Analog Devices, RoHS.

The DLight Unit module with the BH1750FVI-TR sensor enables digital illuminance measurement with high resolution and low power consumption. It is suitable for automation systems, measurement devices, and IoT projects requiring precise light detection. M5Stack U096

Set with the SIMCom 4G module SIM7600G-H designed to work with the Raspberry Pi minicomputer. It supports 4G, 3G, 2G networks and GNSS positioning. Waveshare SIM7600G-H-M2 4G HAT

A 24-channel input/output port expander module controlled by an I2C interface. It was based on the CH423 chip and equipped with a Gravity connector. DFRobot DFR0979