Set of 4250 SMD 1206 resistors with 170 different values, 1% tolerance and 0.25 W power rating provides comprehensive support for working with electronic circuits. Ideal for laboratories, service environments or design workshops.

The LilyPad series module is designed for prototyping interactive e-textiles. It consists of a board with a SAMD11 microcontroller and a CR2032 battery socket, LEDs, a light sensor and a button. SparkFun DEV-14063

The Finder 41.52.9.005.0010 Electromagnetic Relay is a DPDT component, operating on a voltage of 5V DC, capable of switching loads up to 8A at 250VAC, ideal for automation and control systems. Its dual-path design allows independent control of two circuits, and its compact dimensions and robust construction ensure easy installation and long service life. Finder 41.52.9.005.0010

The nRF7002 is a board that allows you to add Wi-Fi connectivity to the Nordic Thingy:53 development kit. It connects to the Thingy:53 edge connector and enables the development of Wi-Fi 6 applications for low-power applications. Nordic Semiconductors nRF7002-EB

LED strip with addressable RGB WS2815 diodes on a white PCB. It is powered by 12 V DC, has a length of 1 m and 30 LEDs/m. Protection level IP67

TMAG5273 Hall sensor module dedicated to detecting the presence, strength and direction of a magnetic field in three dimensions. It uses communication via the I2C interface and Qwiic connectors. SparkFun SEN-23880

A small monochrome OLED display with a diagonal of 1.3 inches and a resolution of 128x64 pixels. Displays text in white on a black background. It is equipped with an I2C interface and uses the popular Qwiic connector. SparkFun LCD-23453

A4988 Stepper Motor Driver Carrier with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Pololu 2980

A4988 Stepper Motor Driver Carrier with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Pololu 2981

The Finder 40.52.8.012.0000 electromagnetic relay is a DPDT type component, operating on a coil voltage of 12V AC, capable of switching loads up to 8A at 250VAC, ideal for controlling circuits in automation and protection systems. Its dual-path design allows independent control of two circuits, and its compact dimensions and robust design guarantee reliability and easy integration in various applications. Finder 40.52.8.012.0000

Module with real time clock (RTC) DS1307 and CR1225 battery socket. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020013

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 7.5 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.

This set of two quadrature encoders for 20D extended-shaft motors provides precise rotational speed monitoring with 20 pulses per motor revolution. The devices utilize magnetic disc and Hall-effect sensors operating from 2.7-18V, and the digital outputs can be connected directly to a microcontroller. The encoders mount directly to the back of the motor, and the compact design and 6-pin JST PH connectors facilitate integration into robotic projects and control systems. Pololu 5661

Long-range Sub-GHz wireless RF transmitter and receiver module, capable of operating in the 868 MHz frequency band. The integrated architecture allows the use of a minimum number of external components while maintaining maximum design flexibility. Hoperf RFM22B-868S2

LED strip with addressable RGB WS2813 diodes on a black PCB. It is powered by 5 V DC, has a length of 5 m and 60 LEDs/m. Protection degree IP67

Waterproof momentary button with a diameter of 12 mm and a height of 21 mm in a stainless steel housing. Green color

The ACS72981 current sensor module uses the Hall effect to precisely and safely measure DC current while providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes power loss and offers a fast response time of less than 2 µs. Pololu 5264

The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5259

C-Mount lens and C-CS adapter. Variable zoom lens 4-12 mm long, FoV 87.2° (H), 39° (H), manual focus and adjustable aperture. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN048