Teltonika TAP100 Wi-Fi 4 PoE Access Point with Power Supply

The industrial access point provides Wi-Fi 4 connectivity in the 2.4 GHz band and supports Wi-Fi Mesh, Fast Roaming, and up to 50 simultaneous wireless connections. Two RJ45 ports, an RS485 interface, passive PoE, and DIN rail mounting support integration with network and industrial devices. Teltonika DAP145

The cellular modem adds 2G, 3G, and 4G LTE connectivity to compatible Raspberry Pi computers. The HAT+ form factor, 40-pin connector, USB interface, and cellular modem functions support integration with embedded and communication systems. Teltonika EBD021

Industrial NTP Stratum 1 time server for synchronizing devices and systems with accurate UTC time without Internet access; GNSS-based synchronization; NTP accuracy over Ethernet of ±1 ms; over 300 NTP requests per second; 10/100 Mbps Ethernet; RS232 and RS485; digital inputs and outputs; Modbus RTU/TCP and MQTT support; 9-30 VDC power supply; RutOS operating system. Teltonika NTP001

Industrial Ethernet router for network isolation and communication with automation devices; 1 x 10/100 Mbps WAN port; 1 x 10/100 Mbps LAN port; WiFi 4 802.11b/g/n; up to 50 simultaneous WiFi connections; Modbus TCP, DNP3, DLMS/COSEM, OPC UA, BACnet and MQTT; passive PoE 9-30 VDC; 9-30 VDC power supply; integrated DIN rail bracket; aluminium housing; RutOS operating system; Teltonika RMS support. Teltonika RUT140

Industrial Ethernet router for network isolation and communication with automation devices; RS232 interface; 1 x 10/100 Mbps WAN port; 1 x 10/100 Mbps LAN port; WiFi 4 802.11b/g/n; up to 50 simultaneous WiFi connections; Modbus TCP/RTU, DNP3, DLMS/COSEM, OPC UA, BACnet and MQTT; passive PoE 9-30 VDC; 9-30 VDC power supply; integrated DIN rail bracket; aluminium housing; RutOS operating system; Teltonika RMS support. Teltonika RUT142

Industrial Ethernet router for integrating RS485 devices with IP networks; RS485 interface with multi-drop bus support; 1 x 10/100 Mbps WAN port; 1 x 10/100 Mbps LAN port; WiFi 4 802.11b/g/n; up to 50 simultaneous WiFi connections; Modbus TCP/RTU, DNP3, DLMS/COSEM, OPC UA, BACnet and MQTT; passive PoE 9-30 VDC; 9-30 VDC power supply; integrated DIN rail bracket; aluminium housing; RutOS operating system; Teltonika RMS support. Teltonika RUT145

Industrial Ethernet router for building and isolating wired networks in automation, industrial systems and IoT installations; 5 x 10/100 Mbps Ethernet ports; 1 x WAN and 4 x LAN; 2 configurable digital I/O; USB 2.0; Modbus TCP/USB, DNP3, DLMS/COSEM, OPC UA, BACnet and MQTT; advanced VPN and firewall functions; 9-30 VDC power supply; aluminium housing; RutOS operating system; Teltonika RMS support. Teltonika RUT301

Industrial wired router for automation, IoT, M2M and network infrastructure; 1 WAN and 3 LAN Gigabit Ethernet ports; support for up to 128 port- and tag-based VLANs; automatic Failover and Load Balancing; Modbus TCP/USB, DNP3, DLMS/COSEM, OPC UA, BACnet/IP and MQTT; OpenVPN, IPsec, WireGuard, ZeroTier and Tailscale; USB 2.0; digital input and output; dual-core MediaTek 880 MHz CPU; 256 MB DDR3 RAM; passive PoE 9-50 VDC; RutOS; Teltonika RMS; operating temperature from -40°C to 75°C. Teltonika RUTM08

The industrial wired router provides four Gigabit Ethernet ports and dual-band Wi-Fi 5 connectivity. Wi-Fi Mesh, Fast Roaming, VLAN support, and multiple VPN protocols enable deployment in industrial, office, and IoT networks. Teltonika RUTM10

The industrial network router provides four Gigabit Ethernet ports, dual-band Wi-Fi 5, and Bluetooth Low Energy. VLAN, failover, VPN, and industrial protocol support enable deployment in Ethernet networks, IoT installations, and automation systems. Teltonika RUTX10

The access point provides 2.4 GHz Wi-Fi connectivity based on IEEE 802.11b/g/n and wired Ethernet through an RJ45 port. Active PoE allows power and data to be delivered through a single network cable, while the integrated mounting bracket supports ceiling installation. The offered version is supplied without a power supply. Teltonika TAP100

The access point provides 2.4 GHz Wi-Fi connectivity based on IEEE 802.11b/g/n and wired Ethernet through an RJ45 port. Active PoE allows data and power to be delivered over a single network cable, while the version with power supply includes a compatible PoE power adapter. Teltonika TAP100

The access point provides dual-band Wi-Fi 5 connectivity in the 2.4 GHz and 5 GHz bands together with Gigabit Ethernet through an RJ45 port. Fast Roaming and Active PoE support enable deployment in offices, retail spaces, and other commercial environments. The offered version is supplied without a power supply. Teltonika TAP200

The access point provides dual-band Wi-Fi 5 connectivity in the 2.4 GHz and 5 GHz bands together with Gigabit Ethernet. Fast Roaming and Active PoE support simplify deployment in offices, retail environments, and other commercial spaces. The version with power supply includes a compatible PoE power adapter. Teltonika TAP200

The access point provides dual-band Wi-Fi 6 connectivity together with a 2.5 Gigabit Ethernet uplink. Fast Roaming, Wi-Fi Mesh, and Teltonika RMS support managed wireless deployments in offices, commercial environments, and networks with multiple simultaneous users. Teltonika TAP400

Compact mounting kit designed for installing compatible Teltonika Networks devices on a standard 35 mm DIN rail. The holder is made of PP FH44 material, while its compact dimensions of 70 x 25 x 14.5 mm facilitate installation of routers, modems, gateways and switches in control cabinets and industrial systems. Teltonika PR5MEC11