Module with DHT20 temperature and humidity sensor. It allows you to measure humidity in the range from 0 to 100% and temperature from -40 to 80℃. DFRobot SEN0497

Data logger with USB type C connector. Data is received via the UART interface and saved on the built-in Flash memory with a capacity of 128 MB. DFRobot TEL0147

Camera module designed for NVIDIA Jetson Nano/Xavier NX. The camera is equipped with a Sony IMX477 sensor and focus controlled by the I2C interface. ArduCAM B0273

5 mm red LED. 1000 pieces in the package

Finder 62.82.8.230.4300 is a 2P 16 A power relay with a 230 V AC coil and Z-type contacts. Intended for industrial automation applications, it offers high reliability, durability and operational safety thanks to the increased contact gap and 6 kV insulation.

Connectivity expansion board based on the STM32WL5MOC module, intended for prototyping and testing LPWAN applications in the sub-GHz band. Supports LoRa and (G)FSK, (G)MSK, and BPSK modulations, and integrates MEMS sensors with broad expansion capabilities. STMicroelectronics B-WL5M-SUBG1

An external TPM 2.0 module in the form of a USB flash drive, designed for Linux computers and single-board computers with a USB port. Based on the Infineon Optiga SLB 9672 chip, it enables secure storage of cryptographic keys, data encryption, and system authentication. Thanks to the USB 2.0 interface, it operates in plug-and-play mode, without the need for soldering or hardware modifications, and is fully compatible with the tpm2-software suite. LetsTrust-TPM2Go USB 2.0

A compact ESC module designed for BLDC motors, ideal for drones and mobile devices. Equipped with the STSPIN32F0A chip and ultra-low RDS(on) transistors, it provides efficient operation and currents up to 20A. It supports 2S–6S LiPo batteries and offers precise sensorless control thanks to BEMF detection. STMicroelectronics STEVAL-ESC002V1

GMSL2 camera extension kit with an 8 MP Sony IMX219 sensor, designed for NVIDIA Jetson Orin Nano and Orin NX platforms, enabling image transmission over distances of up to 15 m using a single coaxial cable. ArduCam B0570

ToF distance sensor (Time of flight) with a range of up to 2.5 m. The module is powered with the voltage of 3.3 V and communicates via the I2C interface. DFRobot SEN0430

Module with a color LCD TFT display with a diagonal of 0.96" and a resolution of 160x80 pixels. It uses the ST7735 controller and communicates via the SPI interface. DFRobot DFR0847

12.3MP camera module with a Sony IMX477 sensor, interchangeable C/CS lens mount, MIPI CSI-2 interface, and tripod adapter, intended for use with Raspberry Pi platforms. ArduCam B0240E

Module with barcode and QR scanner. It allows you to read one-dimensional and two-dimensional codes and communicates via the I2C and UART interface. DFRobot SEN0486

The integrated circuit is intended for gain control in radio-frequency and intermediate-frequency signal paths. Linear-in-dB analogue control provides a gain range from −12 dB to +22 dB, while the integrated RMS detector enables the implementation of an automatic gain control circuit. Analog Devices AD8368ACPZ

Internal PCIe x1 network card with RJ45 1 Gb/s port, Broadcom BCM5751 chipset, Wake-on-LAN support, low-profile bracket. Lanberg PCE‑1GB‑001

Flexible CSI FPC 22PIN to 15PIN cable with a length of 300 mm, designed for connecting camera modules to Raspberry Pi 5 while maintaining compatibility with the CSI interface. Waveshare Camera-Cable-300mm-B

Module with a button and yellow LED backlight. The board is equipped with a Gravity connector and communicates via a digital interface. DFRobot DFR0785-Y

2 MPx camera module with OV2311 sensor working with NVIDIA Jetson Nano. Equipped with a shutter and M12 lens mount. Acrylic housing included. ArduCAM B0221

A class-D audio amplifier designed for the Pimoroni Yukon platform, offering up to 25W of mono output. The module allows for connection to speakers with an impedance of 4Ω or greater and delivers clean, dynamic sound thanks to the TAS2780 chip. Equipped with a temperature sensor and screw terminals, it\'s ready to use, no soldering required. Pimoroni PIM689