Direct current motor driver (DC) with a working voltage from 7 to 58 V and a maximum continuous current of 25 A. It can be controlled by a PWM signal, a potentiometer or by means of built-in buttons. Cytron MD25HV

Module with heart rate sensor, SpO2 (oxygen saturation) and smoke levels. It is based on the MAX30101 chip and communicates via the I2C interface. Pimoroni PIM438

Module with a GPS PA1010D receiver with a built-in ceramic antenna. It can download data from the most popular navigation systems: GPS, GLONASS, GALILEO. Pimoroni PIM525

Gravity Colorful LED is an LED twinkles with seven colors--the colors of rainbow. DFRobot DFR0474

Module with a digital distance sensor with a range of up to 200 cm. It has a digital output that goes low when an object is detected. Pololu 4077

Module with a precise clock RTC DS3231 dedicated to the Raspberry Pi Pico. Communication via the I2C interface. SB Components 21420

2.4 "TFT LCD touch screen with 320x240 pixel resolution, ILI9341 display controller (SPI interface). The module is additionally equipped with a micro-SD card slot. Adafruit 2478

STEMMA QT/Qwiic cable (adapter) for Grove 100 mm long. It enables interoperability between the I2C SparkFun Qwiic and Adafruit STEMMA QT-based system and Seeed Studio\'s Grove boards. Adafruit 4528

ARM7TDMI, 512kB Flash (ISP), 32kB RAM, USB 2.0, ADC, DAC, 2xUART, 2xI2C, SPI, LQFP64, RoHS

White LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 60 LEDs/m. Protection class IP65 (waterproof)

White LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 120 LEDs/m. Protection level IP21

Pololu - 2129

Module with 8 relays 12 V with a maximum switching current of 7 A. Numato Lab RL40004

The module with the tilt sensor, the sensor output is a digital signal. The module has a connector in accordance with the Grove standard. Seeed studio 101020025

A small module with a PIR motion sensor. It allows detecting movement within a maximum range of 6 meters (default up to 3 meters). The measuring angle is 120 degrees. The module has a connector in accordance with the Grove standard. Seeed Studio 101020020

Module with DHT20 sensor. It allows you to measure humidity in the range from 0 to 100% and temperature from -40 to 80 ℃. Seeed Studio 101020932

Module with IPS touch LCD display with a diagonal of 4.3" and a resolution of 800x480 pixels. It uses a 24-bit parallel interface for displaying the image and I2C for the touch panel. Waveshare 4.3inch Capacitive Touch LCD

Development board with ATmega4809 microcontroller and Microchip ECC608 cryptographic chip. It is equipped with 6 analog input pins, 14 digital inputs/outputs (5 as PWM output) and Grove ports. Seeed Studio 102010288

AVR, 16kB Flash, 1kB RAM, 512B EEPROM, ADC, UART, SPI, TQFP44, RoHS