A 2.4 GHz industrial wireless bridge designed for wireless Ethernet communication between PLC controllers, automation equipment, and monitoring systems. The device features two 10/100 Mbps Ethernet ports, supports DC or PoE power input, and delivers a theoretical wireless throughput of up to 300 Mbps with a communication range of up to 500 m. Factory-paired units, web-based configuration, DM Cloud remote management, and an industrial design rated for operation from -40°C to 70°C simplify deployment in demanding industrial environments. PUSR ST208S

Blue USB 3.0 A cable - microUSB 3.0 B with 1m length, allowing SuperSpeed transmission (up to 5Gbit / s = 625MB / s)

This case will combines the touch screen LCD and Raspberry Pi into an All-in-one device

A small USB 2.0 FS hub that allows you to disable individual devices connected to its USB ports, as well as a visual evaluation of the number of devices enabled. It has a built-in connector for the external power supply, so it can act as an active hub. Cable with a length of 40cm, 7 USB sockets

Expander (shield) compatible with Arduino and NUCLEO (STM32) systems, equipped with a Bluetooth 4.1 (BLE) radio module from the SPBTLE-RF family

Crowtail – 3-Axis Digital Gyro is a gyroscope module with the ITG-3200 chip, offering precise rotational-motion measurement on three axes. Intended for interactive projects, robotics, control systems, and motion-responsive devices.

Adapter enabling easy and quick connection of Modular DuoNect expansion modules with a ribbon cable with an IDC connector. MOD-83

Adapter for MQ gas sensor with potentiometer for analog signal calibration. MOD 72

Temperature and relative humidity sensor, equipped with HIH6130-021-001 system with I2C interface. MOD 68

The module enables wireless communication using Bluetooth Low Energy technology version 4.1. It has a built-in AMS002 chip with UART interface. MOD 61

This compact module allows for convenient control of servos communicating via UART in half-duplex or full-duplex mode, making it suitable for a variety of robotic projects. Equipped with Molex connectors and additional pins, it allows for easy integration of popular servos, such as the LX-16A, as well as models from other manufacturers. The module offers high-current power output, ensuring stable operation of complex systems with multiple servos. Pimoroni PIM697

An industrial 5G NR router featuring WiFi 7 (BE6500), dual-band wireless connectivity, and a Qualcomm X62 5G NR modem for high-speed Internet access and reliable local wireless networking. The device offers four 2.5 Gigabit Ethernet ports with PoE Out support, a 10G SFP WAN port, dual SIM slots, six external WiFi antennas, and four external 5G antennas. Designed for enterprise networking, industrial automation, surveillance systems, smart buildings, and other applications requiring fast and dependable wireless communication. PUSR NR370i

This module supports four servos with direct power supply ranging from 5-17V, allowing for the construction of high-power designs. The module features standard servo connectors and two analog inputs that can be used to interface with sensors or servos with feedback. Pimoroni PIM695

This module for the Pimoroni Yukon system allows for simultaneous control of four servos. It features a stabilized power supply with adjustable voltage of 5V, 6V, or 7.4V and a TPS54A24 step-down converter, supporting up to 5A continuous and 10A peak current. The module has built-in temperature sensors and a power status signal for increased safety. Pimoroni PIM696

This module controls addressable LED strips in the Pimoroni Yukon system, featuring a stable 5V/5A output and a voltage level converter for proper communication with RGB LEDs. It allows for easy connection of strips via screw terminals and works with popular standards such as WS2812, SK6812, APA102, and Dotstar. The module can even control two WS2812 strips simultaneously, offering high performance and flexibility. Pimoroni PIM694

A power module for the Pimoroni Yukon platform that allows independent control of two high-current outputs within a voltage range of 5 to 17 V. Built-in diodes and chokes enable excellent handling of inductive loads such as pumps, fans, and solenoids. Each channel can also operate in PWM mode, allowing for smooth power regulation in slow-response devices. The module supports a total current of up to 15 A and includes temperature sensors and a "power good" signal. Pimoroni PIM692

This power supply module for the Pimoroni Yukon offers an adjustable output voltage from 3 to 12V using a powerful step-down converter. It provides stable power with a continuous current of 5A and a peak current of up to 10A, as well as the ability to set a fixed 5V output by cutting a dedicated trace. The module allows for the use of additional digital signals and monitoring of voltage, temperature, and power supply status. Pimoroni PIM690

A compact evaluation board that allows you to quickly connect the FLIR Lepton thermal imaging camera module to a Raspberry Pi or your own hardware projects. The board provides a local 3-5.5V power supply and an on-board clock necessary for proper module operation, with the option to bypass these components via a jumper. FLIR Lepton Breakout Board v2.0

The PUSR U200S CPE router provides high-speed Internet access via 5G mobile networks, dual-band WiFi 6, and Gigabit Ethernet. Powered by the Qualcomm IPQ5018 processor and Qualcomm Snapdragon X62 modem, it supports 5G SA/NSA networks, delivers wireless speeds of up to 3000 Mb/s, and features four Gigabit Ethernet ports. The router is designed for business, retail, industrial, and commercial applications requiring reliable wired and wireless connectivity. PUSR U200S

Wireless 1D and 2D barcode scanner featuring Bluetooth connectivity. The 1 MP imaging engine enables reliable scanning of printed barcodes as well as codes displayed on mobile device screens. The rugged IP52-rated housing and wireless operating range of up to 50 m make the scanner suitable for retail, service, and logistics applications. Datalogic QuickScan QBT2500