Touch display e-Paper E-Ink 2.13" 250x122 for Raspberry Pi Zero with enclosure - Waveshare 20716
ID: 1180692
5906623426478
zł104.71
Tax included
zł85.13 tax excl.
Module with a 2.13" black and white e-Paper display. Equipped with an SPI interface for image display and I2C interface for a touch panel. Waveshare 2.13inch Touch e-Paper HAT (with case)
Description
Module with a black and white e-Paper display with a diagonal of 2.13" and a resolution of 250x122 pixels. It has the ability to display content with a two-step gray scale and a partial refresh function. The built-in controller communicates with the display via the SPI interface, and the I2C interface was used to operate the touch panel. E-Paper displays are characterized by high contrast of the displayed image and consume power only when the displayed content is changed. The module is compatible with 3.3 V systems. The board has a slot that allows you to connect the display to the Raspberry Pi Zero / Zero W. The kit comes with an ABS case that protects the display and minicomputer from damage and dirt. Full documentation is available on the product page.
Features
- Diagonal 2.13"
- Resolution: 250x122 px
- Display interface: SPI
- Capacitive touch screen (5-point)
- Touch screen interface: I2C
- Tempered glass panel
- Spot size: 0.194 × 0.194 mm
- Display color: black, white
- Grayscale: 2
- Full refresh time: 2 seconds
- Partial refresh function
- Refresh power: 26.4mW (typ.)
- Standby power: <0.017 mW
- Viewing angle:> 170 °
- ABS housing
- Voltage: 3.3V
- Outline dimensions: 69.15 x 38.9 mm
- Display dimensions: 48.55 x 23.7 mm
- Case dimensions: 72.2 x 41.9 x 18.6 mm
Kit contains
- 2.13inch Touch e-Paper HAT
- ABS housing
- Screwdriver
- Thermally conductive tape
- Non-slip feet
- 2 x screws
1180692
Data sheet
- Screen type
- E-Ink/Epaper
- Diagonal (inch)
- 2,13
- Resolution
- 250 x 122 px
- Interface
- SPI
- Touch
- Yes
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Miniature version of the Raspberry Pi computer equipped with SiP BCM2710A1 - 4x ARM Cortex-A53 1GHz twin with Raspberry Pi 3 and 512 MB of RAM and wireless connectivity WiFi 802.11 b / g / n + Bluetooth 4.2 / BLE
zł78.90
24h
Available quantity: 2090
Available
Other products in the same category (16)
1.3inch OLED display HAT for Raspberry Pi, 128x64 pixels, SPI/I2C interface
zł37.24
24h
Available quantity: 9
Available
IPS LCD color screen module with DPI interface 7 "1024 x 600 pixels for Raspberry Pi.
zł119.00
24h
Available quantity: 10
Available
HDMI 3.5 "480 x 320 pixel color LCD module with touch panel for Raspberry Pi. Waveshare 3.5inch HDMI LCD
zł145.35
24h
Available quantity: 3
Available
7" LCD display with capacitive touch screen. The display is equipped with HDMI interface for image display and USB for touch screen. It has a resolution of 1024x600 pixels. DFRobot DFR0506
zł372.71
24h
Available quantity: 1
Available
IPS Touch LCD (capacitive) display 13.3 inch with 1920x1080 pixel resolution by Waveshare. Works with all Raspberry Pi computers, as well as with Banana Pi, Banana Pro, BeagleBone Black. The display has an HDMI interface, a touch panel with USB. Waveshare 13.3inch HDMI LCD (H) (with case).
zł944.09
24h
Available quantity: 34
Available
AMOLED 5.5" display with 1920x1080 resolution and 60Hz refresh rate. The display is equipped with a capacitive touch screen with support for up to 10 points as part of the Multi-touch function. Compatible with Lattepanda, Raspberry Pi and other devices with HDMI output. DFRobot DFR0524
zł687.47
4 weeks
No product available!
5" TFT LCD display with touch screen. It was equipped with DSI interface for image display and I2C interface for touch screen. Resolution 800x480 pixels. DFRobot DFR0550
zł287.16
24h
Available quantity: 1
Available
Module with e-Paper display, 9.7" diagonal and 1200x825 px resolution. Communication via USB, SPI or I80 interface. Waveshare 9.7inch e-Paper HAT
zł831.98
4 weeks
No product available!
Module with black and white e-Paper display, 5.83" diagonal and 648x480 px resolution. Communication via SPI interface. Waveshare 5.83inch e-Paper HAT
zł223.48
4 weeks
No product available!
IPS 7" LCD display with touch screen. Equipped with HDMI and VGA interface for image display and USB for touch screen. Resolution 1024x600 pixels. Waveshare 7inch HDMI LCD (H)
zł206.53
24h
Available quantity: 13
Available
The module with a matrix LED display 8x16 (128 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Adafruit 3467
zł84.71
24h
Available quantity: 1
Available
The module with a matrix LED display 8x16 (128 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Adafruit 4120
zł65.95
24h
Available quantity: 2
Available
The module with a matrix LED display 8x16 (128 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Adafruit 4122
zł84.71
24h
Available quantity: 1
Available
5.5" AMOLED display with touch screen. Equipped with HDMI interface for image display and USB for touch screen. Resolution 1920x1080 pixels. Waveshare 5.5inch HDMI AMOLED
zł601.69
24h
Available quantity: 2
Available
E-ink display for Raspberry Pi with 2.13 "diagonal resolution and 250x122 pixels with SPI controller. DFRobot DFR0591
zł114.33
24h
Available quantity: 1
Available
Adafruit 3527 is a small display, ready to connect on any Raspberry Pi computer. It is equipped with a 128x32 monochrome OLED display with sharp white pixels. OLED uses only I2C pins, so it offers many GPIO connections available for buttons, LEDs, sensors etc. It is also nice and compact. Adafruit 3527
zł82.27
24h
Available quantity: 1
Available
Module with a 2.13" black and white e-Paper display. Equipped with an SPI interface for image display and I2C interface for a touch panel. Waveshare 2.13inch Touch e-Paper HAT (with case)