Pololu Simple High-Power Motor Controller 24v12 (Fully Assembled)

Akyga AK-AD-52 is a USB C hub with four additional USB 3.1 ports, ideal for expanding the capabilities of a laptop with a USB C port. You can connect various peripherals and power the devices thanks to an additional DC connector. Akyga AK-AD-52

2.8" display with 320x240 16-bit color pixels and a capacitive touch overlay fits perfectly onto the Raspberry Pi 3/2/A+/B+. The display and touchscreen uses the hardware I2C Pins (SDA & SCL), SPI pins (SCK, MOSI, MISO, CE0) as well as GPIO #25 and #24. Adafruit 2423

Module with 2 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4202

This is a little 5" TFT display with WVGA 800x480 resolution and it has a resistive touchscreen overlay. The driver board only has an HDMI input but for Raspberry Pi, BeagleBone Black and other computers. Adafruit 2109

LCD display 2x16, 80x36mm, FSTN Positive, RGB LED backlight, extended temperature range, RoHS

Graphical LCD display 128x64 pixels with LED backlight. Artronic LCD-PG-128064D-BIW W / B-E6

Compact and versatile all-in-one card reader. It is equipped with 4 slots and is compatible with cards such as SD, Mini SD, Micro SD, MMC, RS-MMC, memory stick, memory stick pro/duo/pro duo. Supports memory cards with a capacity of up to 64 GB. NATEC MINI ANT 3

Angled male socket, wire-board type, for JST PH-2.0 wires, 6-pin, 2mm pitch, 100V, 2A. Set of 10 pieces

GPS Receiver, Digilent, RoHS

FRAM memory with a capacity of 4kbit by Cypress Semiconductor, communicates via the I2C bus, the power supply voltage is in the range 2.7 - 3.6V. The system has an SOIC8 housing

OLED display, alphanumeric 2x16, 80x36 mm, negative (black background), white pixels, 3V/5V, RoHS

Pololu Simple Motor Controller 18v7 (Fully Assembled)

The Lanberg Cat. 8.1 patch cord with Fluke Passed certification guarantees top quality and reliability, enabling optimal network connections compatible with various networking devices in any environment. Lanberg PCF8-10CU-0200-B

32-bit microcontroller from the STM32F7 family with ARM Cortex-M7 core, 512kB Flash memory, 320kB SRAM, I2C, SPI, UART / USART memory, USB, CAN, 1.7 ... 3.6V, 144LQFP, STM, RoHS

4" LCD IPS display with touch screen. The display is equipped with a DPI interface for image display and I2C interface for a touch screen. Resolution 720x720 pixels. Waveshare 4inch DPI LCD (C)

USB adapter designed for XBee modules. It can be connected to a computer with a USB cable and used with the X-CTU software to configure the XBee. SparkFun WRL-11812

Adapter for charging laptops with a 5.5x2.5 mm connector using a USB-C power supply. It supports Power Delivery with voltage from 18.5V to 20V and power up to 100W. The small size and light weight make it practical for travel. Compatible with ASUS, Acer, Toshiba and HP laptops. The adapter does not increase the power of the power supply, so it is important that the power supply has enough power to power the device. Akyga AK-ND-C01

Non-contact temperature sensor with a measuring range from -70 to 380°C. It uses infrared waves and has a current output. DFRobot SEN0264