Category: Converters USB - UART / RS232
There are 86 products.
USB - UART converter based on the CP2102 chip. Compatible with a voltage of 3.3 V, has been equipped with a USB type C connector. Waveshare CP2102 USB UART Board (Type C)
Isolated USB - RS232/RS485/RS422/TTL converter dedicated to industrial applications. It offers 4 channels for serial communication, including TTL channel, TTL/RS485, isolated RS485/422 channel and isolated RS232/485 channel. Provides easy communication between the USB interface and serial communication standards. Waveshare USB TO 4CH Serial Converter
Uniwersalny konwerter USB z możliwością komunikacji przez najczęściej używane interfejsy UART, I2C, SPI i JTAG. Na płytce znajduje się obwód konwersji poziomów napięcia 3,3V i 5V, co zapewnia lepszą kompatybilność z różnymi urządzeniami. Waveshare USB TO UART/I2C/SPI/JTAG
Cable with USB-UART converter dedicated to TFmini and TFmini Plus distance sensors. Ended with a USB type A plug and goldpin connectors. Benewake USB-Dupon
USB - UART converter based on the CH9102F chip. Compatible with the voltage of 3.3 V and 5 V, it has been equipped with a USB type C connector. Adafruit 5568
USB to TTL Serial Cable - Debug / Console Cable for Raspberry Pi, RoHS
The module with the converter USB-UART CP2104 dedicated for minicomputers Raspberry Pi. Adafruit 3589
UART-RS232 converter module. It enables communication of Arduino boards with industrial modules. DFRobot DFR0258
USB - RS485/RS422/RS232 converter designed to convert USB signal to serial signal. It is used to connect devices with USB interface to RS485, RS422 or RS232 network. It uses ADI (Analog Devices iCoupler) galvanic isolation technology. EVC8013B
USB adapter designed for XBee modules. It can be connected to a computer with a USB cable and used with the X-CTU software to configure the XBee. DFRobot DFR0174
Easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH; works with 5V and 3.3V systems and should auto install on most operating systems without the need for additional drivers; uses the CH340G IC to quickly and easily convert serial signals to USB. DEV-14050
USB - UART converter based on the FT232RL chip. Compatible with voltages of 3.3 V and 5 V, it is equipped with a microUSB connector. Cytron UC00A
The UART-USB converter built on the FTDI FT232RL chip. Compatible with 3.3V and 5V voltages. DFRobot DFR0065
The converter enables simple connection of the project being built with the UART output to the computer via a USB interface. After connecting to a computer, a virtual COM port is created. MOD-05 / AZ
USB - UART converter based on the PL2303GS chip. Compatible with 1.8 V, 2.5 V, 3.3 V and 5 V, it is equipped with a mini USB connector. Waveshare PL2303 USB UART Board (mini) V2
UART converter - USB based on the FT232RL system with TX, RX, RTS and CTS lines led out to the goldpin female connector. It uses a mini USB connector. Adafruit 284
This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. DEV-09716