zł8.91
Adafruit - 954 for Raspberry Pi
ID: 199857
zł19.16
Tax included
zł15.58 tax excl.
USB to TTL Serial Cable - Debug / Console Cable for Raspberry Pi, RoHS
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
USB to TTL Serial Cable - Debug / Console Cable for Raspberry Pi, RoHS
Discription
The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USBSerial conversion chip and at the end of the 36" cable are four wire - red power, black ground, white RX into USB port, and green TX out of the USB port. The power pin provides the 500mA direct from the USB port and the RX/TX pins are 3.3V level for interfacing with the most common 3.3V logic level chipsets.
Because of the separated pin plugs, this cable is ideal for powering and connecting up to the debug/login console on the Raspberry Pi. Connect the pins as shown to power the Pi and establish the RX/TX link. Then install the Windows XP/Vista/7 or MacOS X PL2303HX.A drivers on your computer and connect with a terminal program at 115200 baud. Windows 8 is not supported.
Also handy for hacking WiFi routers to install alternate OS's, or nearly any other TTL port. This is easier to use than an FTDI cable in many cases because the wires are separated
This cable is not good for Arduino re-programming such as a Boarduino, MENTA, Monochron, etc. because it does not have the DTR/RTS wire necessary for initiating the bootloader reboot sequence. For that we suggest an FTDI cable or FTDI friend.
Raspberry Pi not included!!
Code: 954
199857
You might also like
The Raspberry Pi 3 Model B+ is boasting a 64-bit quad core processor BCM2837B0 running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT
zł185.00
Delivery date unknown
No product available!
Other products in the same category (16)
Compact programmable industrial controller Tibbo BASIC/C with Ethernet and Wi-Fi connectivity. The DS1102 is designed for Serial-over-IP and industrial automation applications. Tibbo DS1102
zł639.02
24h
Available quantity: 1
Available
USB - RS232 adapter equipped with a USB type A connector and an RS232 connector in the DB9 male standard. It uses the original FTDI FT232RL chip, which guarantees a reliable connection between a variety of devices. Waveshare USB-TO-RS232-Male-Cable
zł47.51
6 weeks
No product available!
USB - UART converter based on the PL2303GS chip. Compatible with 1.8 V, 2.5 V, 3.3 V and 5 V, it is equipped with a micro USB connector. Waveshare PL2303 USB UART Board (micro) V2
zł15.69
24h
Available quantity: 7
Available
UART - RS232 converter with DB9 socket. Waveshare rs232-board
zł13.90
24h
Available quantity: 8
Available
Xbee USB adapter based on the FTDI chip. Intended for configuring Xbee modules. Thanks to the female goldpin connector, it can be used as an FTDI programmer for Arduino FIO / pro / mini / lilypad. DFRobot DFR0050
zł88.90
24h
Available quantity: 1
Available
The converter enables simple connection of the project being built with the UART output to the computer via a USB interface. After connecting to a computer, a virtual COM port is created. MOD-05 / AZ
zł46.64
24h
Available quantity: 2
Available
Pololu 23201a Serial Adapter Partial Kit
zł57.60
6 weeks
No product available!
Adapter USB to RS232 (DB9F) based on the CH341 chipset. AK-50
zł18.45
24h
Available quantity: 23
Available
USB-UART converter with four isolated UART ports with built-in isolation of 1.5kV/3kV. It guarantees data transmission speeds of up to 12 Mbps and the ability to work with 1.8 V or 3.3 V voltage systems on the UART side. It is equipped with a USB Type C connector and is capable of operating in a wide temperature range from -40°C to +55°C. Electronic Prototypes EPED001A-10-STD
zł669.02
24h
Available quantity: 1
Available
DEV-11814 - USB-to-Serial Bridge - µUSB-PA5, RoHS
zł147.17
24h
Available quantity: 2
Available
CP2102 USB to UART Module, USB micro connector
zł23.03
24h
Available quantity: 14
Available
USB - UART TTL converter based on the FT232RL chip, the module is equipped with a miniUSB socket. Works with 3.3V or 5V voltage levels.
zł15.90
6 weeks
No product available!
Isolated USB - RS232/485/422 TTL converter dedicated to industrial applications. It provides easy communication between USB interface and industrial serial communication standards. EVC8014
zł319.66
24h
Available quantity: 6
Available
USB adapter designed for XBee modules. It can be connected to a computer with a USB cable and used with the X-CTU software to configure the XBee. DFRobot DFR0174
zł97.48
24h
Available quantity: 2
Available
USB - UART converter based on the FT232RL chip. Compatible with voltages of 3.3 V and 5 V, has been equipped with a USB type C connector. Waveshare FT232 USB UART Board (Type C)
zł28.91
4 weeks
No product available!
4-channel industrial-grade USB-UART TTL converter. Equipped with a number of security features ensuring stable and safe communication. Waveshare USB TO 4CH TTL
zł67.74
24h
Available quantity: 8
Available
USB to TTL Serial Cable - Debug / Console Cable for Raspberry Pi, RoHS