HSTS016L Hall Sensor. Enables measurement of high AC and DC currents up to 20 A. modHSTS016L

Laser sensor of air pollution with PM2,5 and PM10 particles. It allows for precise analysis of the amount of pollutants in the environment, has small dimensions and a built-in silent transfer fan. The data is output to the UART interface and via the PWM signal. The set includes a UART-USB converter. Nova Fitness SDS011

A modern laser scanner that integrates the advantages of triangulation and DTOF. It offers a measuring range of up to 12 meters with a low dead zone of 5 cm. The scanning frequency is 10 Hz (600 rpm) and the sampling rate is 5000, which allows an angular resolution of 0.72° to be achieved. Waveshare RPLIDAR C1

Module with INA219 system with bi-directional current meter

SEN-13314

Advanced electronic compass module that precisely calculates direction to within a few degrees, and its tilt compensation allows operation in difficult environmental conditions. The module is easy to use and allows to obtain measurement data via I2C interface at 5 Hz. SparkFun SEN-12916

The LD2411-S module is a 24 GHz radar for precise detection of human motion and micro-motion at distances up to 6 meters. modHLK-LD2411S

Gravity: 360 Degree Hall Angle Sensor is a rotation angle sensor measuring a value in the range of 0-360 ° with an analogue output, powered by 5V. DFRobot SEN0221

Module with a gesture sensor PAJ7620U2, which allows to recognize up to 13 gestures. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020083

Measurement module for dissolved oxygen in water. It allows you to determine the level of water quality. The set includes a measuring module and a probe. DFRobot SEN0237-A

Module with a pulse sensor (heart rate). The board is equipped with a Grove connector and a digital output in the form of pulses. Seeed Studio 101020033

Indoor air quality measurement module, combining two high-end Sensirion sensors – SCD41 and SEN55. It offers a comprehensive set of measurements, including CO2 concentration, volatile organic compounds (VOC), suspended dust (PM1.0, PM2.5, PM4, PM10), as well as temperature and relative humidity. SparkFun SEN-25200

Module with a magnetic sensor based on the CT10 reed switch. CT10 is a unipolar reed switch, normally open. The sensor reacts to the action of an electromagnet, permanent magnet or a combination thereof. The module has a connector in accordance with the Grove standard. Seeedstudio 101020038

LJ8A3-2-Z/EX is a reliable inductive proximity sensor for detecting metal objects in industrial automation, operating in the voltage range of 10V-36V DC. It features a detection range of up to 2 mm and a compact housing with a diameter of 8 mm, which allows easy installation in limited space, and the NPN NO output facilitates integration with control systems.

A sensitive sensor of the magnetic field, operating in the range of ± 50 microtesels, which generates a rectangular signal proportional to the strength of the field, which facilitates its integration with microcontrollers. It is distinguished by high temperature stability and tenderness, which makes it ideal for precise magnetic field measurements in applications requiring reliability. Sparkfun Sen-25531

Universal weather station for measuring wind speed and direction, temperature, humidity and atmospheric pressure, compatible with micro:bit, Raspberry Pi, ESP32 and Unihiker controllers. It has 16 MB of internal memory, which allows for 160 days of data storage at a minute sampling rate, and data can be exported via USB Type-C port. The sturdy metal casing with a waterproof protective coating and compatibility with tripods make the station ideal for field atmospheric research and educational projects. DFRobot EDU0157-EN

The Digilent Pmod NAV uses the LSM9DS1 3-axis accelerometer, 3-axis gyroscope, 3-axis magnetometer, plus the LPS25HB digital barometer to provide users with 10-DOF functionality. Digilent 410-326

The temperature and humidity sensor with RS485 Modbus interface is a precise measuring device, ideal for industrial automation systems, easily integrated thanks to the Modbus RTU protocol. Mounted on a DIN rail, it measures temperature from -40°C to 80°C and humidity up to 100% RH, providing reliable data in harsh environmental conditions.

The module is based on the Acconeer XM125 radar, which uses 60 GHz radar technology, offering distance measurement up to 20 meters and recognition of objects and their movement speed. The sensor is characterized by low power consumption, making it ideal for battery-powered devices, and also allows for various detection modes, such as level measurement or human presence. Supported by the Arduino library and the Acconeer Exploration Tool, the module provides support for monitoring, debugging and configuration, offering a wide range of applications from smart homes to advanced robotics and security systems. SParkFun SEN-24540

Gravity: UART Infrared CO2 Sensor is a high precision CO2 sensor. It uses the UART interface for communication. It allows to measure CO2 content in the air in the range of 0 ... 50000ppm. DFRobot SEN0220