An ultrasonic sensor measures distance by calculating the time difference between sending a signal and receiving an echo from an object. It uses echolocation to measure distances, just like a bat.
The URM07 is an ultra low-power sensor. The effect range is up to 7.5m, and it has a wide range power supply of 3.0 - 5.5V. It is directly compatible with 3.3V or 5V devices such as Arduino, Raspberry Pi. etc. The average operating current is only 5mA and standby current is only 14uA. According to the principle of ultrasound sensors, the accuracy of the distance value will be affected by the air temperature and wind direction, so using a DFRobot URM07 built-in temperature sensor, you can read the ambient temperature, and automatically calculate temperature compensation. The sensor uses an integrated ultrasonic probe with a detection angle of approximately 60° in a compact and lightweight unit. The unit uses a 2.54mm pitch 4Pin interface, using UART communication, compatible with most common microcontrollers.
URM07 Detecting Angle
URM07 UART ultrasonic distance sensors have undertaken rigorous road testing and optimization. We guarantee that this sensor has first-class response speed, ultra high stability, the highest sensitivity and ultra low power consumption. If you have harsh environmental requirements for your sensor performance in your design, the URM07 is definitely the best choice.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Parallax PING))) Ultrasonic Sensor #28015
No product available!
The HC-SR04 ultrasonic sensor module is commonly used in conjunction with Arduino to precisely measure distances ranging from 2 cm to 500 cm, with a resolution of 3 mm. It is a good choice for projects in the field of robotics, automation and security systems. It works on the principle of emission and reception of ultrasonic waves. It works with microcontroller platforms such as Arduino, Raspberry Pi, ESP32 or STM32. modHC-SR04
No product available!
URM04 v2.0 Ultrasonic Sensor
The ultrasonic distance sensor modUS-015 is based on the analysis of the delay of reflection of the ultrasonic wave from the obstacle - the range of the sensor from 2 to 400 cm with an accuracy of 0.3 cm + 1%
Module with an obstacle sensor operating in the infrared band. Equipped with an XH2.54 connector, it has a digital output informing about the detection of an obstacle
Ultrasonic distance sensor (sonar) with a measuring range from 15 to 645 cm with the possibility of detecting objects in a selected zone. It allows you to read data via the RS232 interface. DFRobot SEN0276
No product available!
Module with distance sensor Sharp GP2Y0D810Z0F operating in the infrared band. It is powered with a voltage ranging from 2.7 to 6.2 V and has a digital output (Gravity connector). DFRobot SEN0042
A miniature lidar proximity sensor that detects objects up to 10 cm away, regardless of color, transparency, or lighting. It generates a digital signal (0 V on detection), operates in the 3-5.5 V range, draws only 30 mA, and supports sleep mode via the ENABLE pin. Ideal for robotics, automation, and contactless interfaces, it offers a fast response time (142 Hz), switching hysteresis, and a compact housing with an indicator LED. Pololu 5462
No product available!
Module with a distance sensor with a range of up to 130 cm. It has a digital output that generates a pulse with a width proportional to the measured length. Pololu 4071
Module with integrated proximity and ambient light sensors and IR emitter in the VCNL4040 system. It allows the detection of obstacles in the range of 0 to 20 cm (no dead zone). It communicates via the I2C bus. SparkFun SEN-15177
LIDAR distance sensor with a measuring range from 5 cm to 10 m and a resolution of 1 cm. It communicates via the I2C or ANT interface. The set includes a module with Qwiic SparkFun SEN-18009 connectors
No product available!
Ultrasonic distance sensor with a range of 30 to 500 cm. Powered from 5 to 12 V, it communicates via RS485 interface. DFRobot SEN0519
ToF distance sensor (Time of flight) with a range of up to 5 m. The module is supplied with the voltage of 3.3 V and communicates via the I2C interface. SparkFun SEN-19036
LIDAR distance sensor with a measuring range from 5 cm to 10 m and a resolution of 1 cm. It communicates via the I2C or ANT interface. SparkFun SEN-15776
No product available!
VL53L8CX sensor module that offers fast and accurate distance measurement up to 4 m via I²C or SPI digital interface. It can measure distances to multiple targets simultaneously, providing depth map data with a resolution of up to 8x8. The built-in power supply circuit allows operation in the voltage range from 3.2 V to 5.5 V. Pololu 3419
No product available!
Laser scanner (Lidar) 360 degrees with a measurement frequency of 10 Hz and 16,000 measurements / second. Range up to 25m, measuring error at 1%. Sparkfun SEN-15045
No product available!
Laser distance sensor with a large measuring range from 0.2 m to 350 m. Optimized for industrial applications and work in difficult weather conditions. Benewake TF350 RS485/RS232
No product available!
Laser distance sensor with a measuring range from 0.1 m to 40 m. Optimized for industrial applications. Benewake TF02-i
Module with ToF VL53L4CD sensor with a range of up to 1.3 m and a resolution of 1 mm. It is equipped with a Qwiic connector and communicates via the I2C interface. SparkFun SEN-18993
No product available!
DFRobot SEN0153