Category: Power modules

The Step-Down D24V3F12 Buck Voltage Regulator module gives the output voltage of 12V with a wide input voltage range of 14.5-42V and a maximum output current of 300 mA. Pololu 2100

Pololu 5V Step-Up Voltage Regulator U3V50F5

The Step-Down converter module on the MP1584EN chip converts the input voltage (9-35V) to the regulated output voltage (0.8-25V) with a maximum current of 5A and a power of 25W. It operates in temperatures from -20°C to 75°C and has a compact size of 45 x 31 x 16 mm.

The Step-Down converter module on the MP1584EN chip converts the input voltage 9-35V to output voltage 5V with a maximum current of 5A and a power of 25W. It operates in temperatures from -20°C to 75°C and has a compact size of 45 x 31 x 16 mm

The Step-Down converter module on the MP1584EN chip converts the 4.5-28V input voltage to 12V output voltage with a maximum current of 3A and an efficiency of up to 92%. It is a compact device measuring 22 x 17 x 4 mm, operating in a temperature range of -20°C to 85°C, ideal for a variety of industrial applications.

The Step-Up converter module converts the voltage in the range of 8.5-48V to 10-50V with a conversion efficiency of over 96%. It operates in a wide temperature range from -40°C to 85°C, offering a current of up to 10A.

The Step-Up Converter Module converts input voltage (8.5-50V) and input current (up to 15A) to output voltage (10-60V) and output current (up to 12A) with high conversion efficiency (96%) and overvoltage protection high intensity. The module can operate in a wide temperature range (-40 - 85°C) and frequency (150kHz), allowing constant current adjustment from 0.2 to 12A.

The Step-UpU1V11F5 Buck Voltage Regulator module with output voltage 5V, input voltage range of 0.5-5.5V and a maximum output current of 1.2A. Pololu 2562

The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and an output in the form of pads. Allows powering devices with 12V. PDC004

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 6 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.

Step-down DC-DC converter module that converts a 12 V or 11.1 V output voltage (e.g. from a lithium battery) to a voltage in the range of 1.8 V to 5.1 V. It has a power output of up to 60 W, and with an output current of up to 18 A, the module can be used to power a 5 m WS2812 RGB LED strip. DFRobot DFR1025

The S9V11MACMA switching step-up/step-down regulator efficiently produces a finely adjustable output between 2.5 V and 9 V whether it is higher or lower than the input voltage, which can range from 3 V to 16 V. The regulator also has a precision-adjustable low-voltage cutoff with hysteresis that can be used to prevent battery over-discharge.

Step-Down DC-DC converter module based on the D24V150F7 chip. Input voltage 9..40V, output voltage 7.5V (max 15A). Pololu 2883

This synchronous switching step-down (or buck) regulator takes an input voltage of up to 40 V and efficiently reduces it to 3.3 V with an available output current of around 15 A. Pololu 2880

The protection circuit for one Li-Ion cell with a voltage of 3.7 V. It has the function of charging, discharging and over-discharge protection. The cells can be discharged with a continuous current of up to 12 A

The protection system for four Li-Ion cells with a voltage of 14.8 V. The module has the function of charging the cells, discharging and protecting against excessive discharge. The cells can be discharged with a continuous current of up to 18 A

The protection circuit for one Li-Ion cell with a voltage of 3.7 V. It has the function of charging, discharging and over-discharge protection. The cells can be discharged with a continuous current of up to 8 A

The protection circuit for one Li-Ion cell with a voltage of 3.2 V. It has the function of charging, discharging and over-discharge protection. The module can work with a current of up to 12 A