.png)
Category: DRONES
Drones - FPV Parts, Electronics and Equipment
The Drones category includes FPV drones and components for building, upgrading, and servicing multirotor platforms. The range covers frames, motors, flight controllers, ESCs, FC + ESC stacks, propellers, electrical connection components, and electronics for control, video transmission, telemetry, positioning, and power supply. Product groups facilitate component selection for both new builds and upgrades of existing drones.
Subcategories
There are 134 products.
A set of MR30 connectors (male plug and female socket with shields) with a maximum current of 30 A. It is perfect as a connector for connecting motors and ESC regulators. Amass MR30. Amass MR30
Set - two connecting cables (with clamped insulated bushes), matching ARK connectors (suitable for conductors with a cross-section> 2mm ^ 2). The wires have a length of 30cm, the color of wires: blue, red
Automatic discharger designed to reduce the voltage of 2S-6S LiPo batteries to a suitable storage level. The device automatically detects the number of cells, stops discharging at 3.85 V ± 0.08 V per cell, and uses a temperature sensor and heatsink to control temperature during operation. VIFLY StoreSafe XT60.
Four-channel VIFLY ToothStor charger and discharger for 2S LiPo and LiHV batteries with BT3.0 and JST-XH2.54 connectors. Supports charging at up to 1.5A per channel, balancing and Storage mode at 3.80V/3.85V per cell. Power input via USB-C PD3.0, XT60 or DC connector. VIFLY ToothStor
Six-channel VIFLY WhoopStor 3 charger and discharger for 1S LiPo and LiHV batteries with PH2.0 and BT2.0 connectors. Supports adjustable charging current from 0.3A to 1.3A per channel and Storage mode at 3.80V/3.85V. Power input via USB-C PD3.0, XT60 or DC connector. VIFLY WhoopStor 3
Six-channel VIFLY WhoopStor 3 charger and discharger for 1S LiPo and LiHV batteries with PH2.0 and BT2.0 connectors. Supports adjustable charging current from 0.3A to 1.3A per channel and Storage mode at 3.80V/3.85V. Red enclosure version. VIFLY WhoopStor 3
Six-channel VIFLY WhoopStor 3 charger and discharger for 1S LiPo and LiHV batteries with PH2.0 and BT2.0 connectors. Supports adjustable charging current from 0.3A to 1.3A per channel and Storage mode at 3.80V/3.85V. Black enclosure version. VIFLY WhoopStor 3
Locator buzzer designed to help find FPV drones and RC aircraft after power or control signal loss. The built-in 80 mAh LiPo battery allows operation after the main battery is disconnected, while the sound level reaches up to 110 dB. VIFLY Finder 2.
Wireless locator buzzer using a motion sensor to detect when a drone stops moving or crashes. The built-in 80 mAh LiPo battery enables independent operation, while the audible signal reaches up to 105 dB. Installation requires no wiring or soldering. VIFLY Beacon.
Automatic discharger designed to reduce the voltage of 2S-6S LiPo batteries to a suitable storage level. The circuit automatically detects the number of cells, stops discharging at 3.85 V ± 0.08 V per cell and uses a temperature sensor and heatsink for temperature management during operation. VIFLY StoreSafe XT30
Compact locator buzzer designed for small FPV drones and RC models, equipped with its own 40 mAh LiPo battery. The audible signal reaches a volume of up to 100 dB, while the operating time after loss of main power is up to 7 hours. VIFLY Finder Mini
LED lighting system designed for the DJI Neo, equipped with 86 LEDs arranged around the drone body. The system offers seven colors and seven lighting effects, while two built-in 150 mAh batteries provide at least 50 minutes of operation in steady-on mode. VIFLY NeoHalo LED Strip for DJI Neo.
Compact anti-collision light designed to increase drone visibility during flight, equipped with white, red and green LEDs. It offers multiple lighting modes, a manufacturer-declared visibility range of over 3 miles and an operating time of up to 4 hours in strobe mode. The built-in 160 mAh battery is charged via USB Type-C. VIFLY Strobe
Compact module designed for switching video between two FPV cameras in racing drones and RC airplanes. Control can be performed using a PWM signal or receivers supporting SBUS, IBUS and DSMX, without requiring configuration in Betaflight. VIFLY Cam Switcher
Series charging board designed for charging from 1 to 6 1S LiPo batteries using a standard charger supporting multi-cell battery packs. The rotary switch allows the number of connected batteries to be selected, while the built-in fuse provides additional protection during charging. Version equipped with BT2.0 & PH2.0 connectors. VIFLY 1S Series Charging Board
Lighting kit designed for the DJI Avata 2, consisting of a front light with Cree LEDs and two downward-facing lights. The front light provides a luminous flux of up to 400 lm, while the bottom lights illuminate the area beneath the drone to support the positioning system in dark environments. The total weight of the kit is 50 g. VIFLY Tactical Light for DJI Avata 2
Illuminated propeller duct guards designed for the DJI Avata 2, combining additional protection with multicolor LED lighting. The system uses 130 LEDs, offers seven colors and seven lighting effects, while the built-in batteries provide at least 50 minutes of operation in steady-on mode. VIFLY LED Duct Guards for DJI Avata 2
Electronic protection device designed to protect RC systems and drone electronics during initial power-up, diagnostics and power system testing. When a short circuit or the selected 1 A or 2 A current threshold is exceeded, the device cuts off the current flow, reducing the risk of component damage. VIFLY ShortSaver V2
Damping balls intended to reduce vibrations transferred to a camera gimbal in drones and multirotor models. The rubber construction and internal damping medium help dissipate vibration energy and reduce image interference during recording. The set includes four damping balls. Tarot TL10A09
A set of MT30 connectors (male plug and female socket with covers) with a maximum current of 30 A. It will be perfect as a connector for connecting motors and ESC regulators. Amass MT30
FPV Drones
FPV drones enable flight with a real-time video feed transmitted from an onboard camera. The category includes ready-to-fly platforms designed for applications such as dynamic FPV flying, precise maneuvering, and cinematic video recording, depending on the design and equipment of each model.
Drone Frames and Propulsion Systems
Frames provide the structural base of a drone and mounting points for motors, electronics, cameras, and other components. The category also includes drone motors, including BLDC units used in FPV propulsion systems and designed to operate with appropriately selected ESCs and propellers.
Flight Controllers and ESCs
Flight controllers process sensor data and control signals, providing stabilization and controlling drone behavior during flight. ESCs regulate brushless motor operation, while FC + ESC stacks provide matched components for the flight control and propulsion systems.
Propellers and Electrical Components
Propellers convert propulsion system power into the thrust required for flight, making diameter, blade count, and pitch important parameters when matching them to motors and the intended flight characteristics. The range also includes propeller-related accessories as well as connectors and cables used for electrical connections between the power supply, ESCs, motors, and other onboard electronics.
Drone Electronics
Drone electronics include components responsible for communication, control, and data transmission or acquisition during flight. The category covers RC transmitters and receivers, FPV equipment, video transmission and telemetry modules, power supply components, and GPS/GNSS modules used for positioning and navigation functions.