Category: Main categories

PETG filament (orange) with a diameter of 1.75 mm and a net weight of 1 kg, manufactured by Prusa Research with a diameter tolerance of ±0.02 mm, intended for FDM 3D printers.

A 3-port HUB module with a USB 2.0 interface with an RJ45 connector, designed to work with the Raspberry Pi minicomputer. Waveshare ETH/USB HUB HAT (B)

WiFi antenna compatible with Raspberry Pi Compute Module 4. Supports 2.4G and 5G frequency bands. Waveshare ORD-CM4-ANTENNA

A 5V buzzer with a 12 mm diameter is an active acoustic signaling device designed for through-hole (THT) mounting. Powered by a 5V supply, it generates a continuous sound signal at a frequency of approximately 2.3 kHz and a loudness of about 85 dB, making it ideal for use in alarm and signaling systems.

Rectangular LED 5x2 mm RED Diffused, angle 160 degrees; light intensity 30 mcd (20mA) (2.2V); df 635nm

Male terminal block, angled, 8-pin. Pitch 3.81mm. Height 7mm. 15EDGRC. Set of 10 pieces

2-position waterproof momentary rotary switch, 19 mm in diameter, in a stainless steel housing. Yellow colour

The module with a 2" color IPS LCD display. It has a resolution of 240x320 pixels and an ST7789 controller. Communication with the module is realized through SPI interface. Waveshare 2inch LCD Module

Module with an analog MQ2 gas sensor. It enables the detection of LPG, butane, propane, methane, alcohol, hydrogen and smoke. It is powered with the voltage of 5 V and has an analog output

Male terminal block, angled, 6-pin. Pitch 3.81mm. Height 7mm. 15EDGRC. Set of 10 pieces

BIGTREETECH EBB SB2209 CAN V1.0 is a reliable and quiet controller module that, thanks to the TMC2209 chip, ensures high performance, safety, and long-lasting stable operation of your 3D printer. With extensive diagnostic capabilities and compatibility with popular control boards, it is an excellent solution for demanding users. BIGTREETECH EBB SB2209 CAN V1.0

Finder 90.03SMA is an 11-pin relay socket with screw terminals, designed for DIN rail or panel mounting, and compatible with relays from series 60.13. It supports currents up to 10 A at 250 V AC, ensuring reliable connections in industrial applications.

Permanent cylindrical neodymium magnet with a diameter of 6 mm and a height of 1 mm. Set of 10 pcs

Holder for 3 AA R3 batteries with a flap and a switch is an ideal solution for people who need a simple and reliable way to connect AAA batteries to obtain a voltage of 4.5 V

Spring dedicated to the heating table of 3D printers. It allows you to adjust the degree of tightening the knob, and thus enables the proper leveling of the working table. Set of 4 pcs

An expansion board designed for the Raspberry Pi Pico. The board has 13 GPIO pins, 3 ADCs, UART, I2C and SPI interfaces. The pins are color coded according to the Gravity standard. DFRobot DFR0848

Two-channel driver for DC motors with an operating voltage from 7 to 45 V and a continuous current of up to 60 A. It can be controlled by an analog signal, PWM, UART, RC or by means of built-in buttons. Cytron MDDS60

UART to Wi-Fi 802.11 b/g/n converter module with external antenna, which can connect traditional serial device and MCU controlled device to Wi-Fi network for control and management. USR-WIFI232-B2