Category: Main categories
Subcategories
There are 24115 products.
This 5 cm long, 15-wire, 1 mm pitch FFC/FPC ribbon cable terminated with a T2 (B2) terminal enables flexible module connection in compact electronic systems. Ideal for devices requiring reliable signal connections in confined spaces
LED 0805 yellow, 100 mcd (20 mA) (2.0 V)
Flex Cable for Raspberry Pi Camera - 100mm / 4"
A six-axis (Freis) three axis accelerometer + three axis magnetometer in a QFN16 housing. The sensor can measure the acceleration in the range of ± 2g / ± 4g / ± 8g and magnetic induction in the range of ± 1200μT
Yellow 6-core connecting cable, 30 cm long. Intended for use with Kamami KAmod modules. It is terminated on both sides with a red plug that fits the WF06S connector. CAB_HU06-30-YELLOW
KAmodLIS35DE is a module with a three-axis LIS35DE accelerator from STMicroelectronics. The chip has a digital signal output (I2C or SPI bus) and allows acceleration measurement in three axes.
The KAmod Ruler is a practical tool for both measurements and quick access to the most important information needed when working with Raspberry Pi
KAmodMMA8653FC is a module with NXP's MMA8653FC three-axis accelerometer. The sensor allows the measurement of acceleration in the range of ± 2g / ± 4g / ± 8g, the measurement frequency is from 1.56 Hz to 800 Hz. Communication with the sensor takes place via the I2C interface
The dynamic NFC / RFID tag with I2C bus and ISO 15693 RF interface in the SOIC8 housing has a built-in 64k EEPROM memory. Producer: STMicroelectronics
KAmodM41T82 is a module with the STMicroelectronics M41T82 RTC clock. The chip allows precise timing, and an additional battery connector allows you to maintain the power supply when the main power is turned off. Communication with the module is realized via I2C bus.
The RP2350A is a high-performance microcontroller with two Cortex-M33 or Hazard3 cores, 520 KB of SRAM, and support for up to 16 MB of external flash/PSRAM via a QSPI interface. It offers a wide range of peripherals, including USB 1.1, 24 PWM channels, 12 PIO machines, and advanced security features, making it ideal for embedded and IoT applications
Connector for connecting a 50-pin ribbon with a pitch of 0.5 mm to a printed circuit board. F0500WR-S-50PF
Lever switch with leads for cable assembly (outlet with "window"). The switch has one row and two ON-ON positions. It can switch voltage to 125VAC and current to 6A. MTS102
ZIF connector FFC/FPC 16-pin, 0.5 mm pitch, bottom contact, designed for horizontal PCB mounting. Ideal for connecting signal ribbons in compact electronic circuits.
Connector for connecting a 30-pin ribbon with a pitch of 0.5 mm to a printed circuit board. F0500WR-S-30PF
The DC-DC Step-down Converter Module with the LM2596S chip allows you to convert the voltage from the range of 3-40 V to a regulated output voltage of 1.5-35 V with high efficiency up to 92%. The maximum output current is 3 A, and the operating frequency is 150 kHz. The compact design with dimensions of 43 × 21 × 14 mm, the possibility of precise voltage regulation and a pinout of 2.54 mm facilitate the integration of the module in DIY projects, power supply systems, modeling and laboratory stations. The operating temperature range is from -40 to 85°C