.png)
Category: Main categories
Subcategories
There are 23539 products.
Connector for connecting a 30-pin ribbon with a pitch of 0.5 mm to a printed circuit board. With a FLIP latch
KAmodMPC17C724 is a module with a double MP bridge bridge type MPC17C724. The system allows you to control two DC brush motors or one bipolar stepping motor. The controller operates at a voltage range of 2.7 - 5.5 V and can work with motors with power consumption up to 0.4 A.
Small side cutters 170 mm, allow for precise cutting in hard-to-reach places
A tape enabling the connection of a DSI display with a 15-pin 1 mm connector intended for Raspberry Pi to the CSI/DSI connector on a Raspberry Pi 5 computer. Raspberry Pi SC1133
Lever switch with leads for cable assembly (outlet with "window"). The switch has one row and two ON-ON positions. It can switch voltage to 125VAC and current to 6A. MTS102
Pin strip straight in yellow, single-row, female, 1x10, pitch 2.54mm, THT, RoHS. PB10S YELLOW. Set of 10 pieces
STBB1-APUR, Buck-Boost DC-DC converter, allows to lower and increase voltage, DFN10, STMicroelectronics, RoHS
Pin strip straight in yellow, single-row, female, 1x8, pitch 2.54mm, THT, RoHS. PB08S YELLOW. Set of 10 pieces
Bluetooth module v2.0 + EDR (master / slave), controlled by AT + commands with built-in antenna.
The KAmod I2C-IOexp16 module is an extension equipped with 16 programmable digital lines (inputs or outputs), based on the MCP23017 system and controlled via the I2C bus with the possibility of connecting up to 8 modules thanks to addressing. The module works with a voltage from 2 to 5 V, has an interrupt output and allows for a current flow of up to 20 mA on each line
ZL5USB is a USB-UART converter module based on Silabs CP2102. The module has small sizes, microUSB connector and it can works with the 2.5...5.5V signals.
Spacer sleeve with internal diameter 3.2mm and external diameter 5mm, sleeve length 2mm. The sleeve is made of white polyamide, Fix & Fasten, RoHS
The 74LVC2G06 is an energy-efficient logic inverter with open-drain outputs, housed in a compact SOT363 package. It is ideal for use in mobile devices, computers, and systems requiring signal isolation and voltage level shifting
Threaded hexagonal bushing M3, sleeve length 15mm, male-female. The sleeve is made of white polyamide, Fix & Fasten, RoHS
Mounting hardware kit for M.2 modules and drives; includes 4 black standoffs, 8 black screws and 1 additional metal threaded component.
Module with DS18B20 temperature sensor from Dallas Semiconductor. The sensor used allows you to measure temperatures in the range -55 ~ 125 ° C with an accuracy of ± 0.5 ° C (in the range of -10 ~ 85 ° C). The 1-Wire interface is used for communication. The plate is equipped with a goldpin connector and a KAMAMI connector, allowing easy connection of the module to the commissioning kits.
The official case for Raspberry Pi 5, in black and grey, ensures perfect fit, optimal air circulation thanks to ventilation holes and a built-in fan with variable speed, easy access to GPIO ports through a removable panel, and also includes a backlit button, a heatsink for the processor and stabilizing silicone feet. Raspberry Pi SC1159
The most popular Sn60Pb40 SW26 solder is a high-quality lead product with SW26 flux, intended for professional soldering in electronics and electrical engineering, meeting the EN ISO 9453:2014 standard