Category: Main categories
Subcategories
There are 22532 products.
The KAmod RPI5-Proto universal board is an accessory designed for the Raspberry Pi 5, offering a grid of metalized holes in a 2.54 mm pitch and GPIO pins and I2C, SPI and UART interfaces, which makes it easy to create simple electronic circuits
NEMA 17 stepper motor with a resolution of 200 steps per revolution. It is powered by 5.3 V and provides a torque of 27 N-cm. It has a "D"-shaped shaft with a diameter of 5 mm, which facilitates installation and ensures a secure connection with other elements of the system. QSH4218-35-10-027
Łukasz Skalski
The MQ-5 sensor allows the measurement of alcohol and gas concentrations, such as methane, LPG, and carbon monoxide. Sensor measuring range: up to 10,000 ppm
Size M antistatic ESD safety gloves. Made of nylon fiber, they enable precise handling of objects and feeling of small elements
VisionSOM series module with Renesas RZ/V2L 1.2 GHz processor (dual Cortex-A55 + Cortex-M33 + DRP-AI), 1 GB RAM, 8 GB eMMC, built-in WiFi and Bluetooth wireless module. -25...+70°C. SoMLabs SLS22RV2LDC_1200C_01GR_08GE_1WB_E
TTL - RS485 converter 5V. RS485 interface on 5.08mm screw terminal and 2.54mm pitch connector.
A set containing Raspberry Pi Zero W and official accessories: housing, power supply, microUSB - USB and miniHDMI - HDMI adapter
SOP8 / SOIC8 adapter on DIP8 in the form of a PCB. It will be used as a programmer adapter, contact plates or prototype structures.
Yellow plastic cap for the monostable button (Tact Switch). Fits switches with dimensions 12x12x7.3 mm
External waterproof LPWA antenna dedicated to communication in LoRa networks in the 868 MHz frequency band. It is mounted using the built-in magnet in the cradle. Waveshare 868/915M Magnet Mount Antenna
RS232 - UART converter module based on the MAX3232 chip. There is a DB9 connector on the board and a 4-pin connector with a 2.54 mm pitch
The most popular Sn60Pb40 SW26 solder is a high-quality lead product with SW26 flux, intended for professional soldering in electronics and electrical engineering, meeting the EN ISO 9453:2014 standard
Rectangular LED 5x2 mm RED Diffused, angle 160 degrees; light intensity 30 mcd (20mA) (2.2V); df 635nm
Tomasz Jabłoński, Krzysztof Pławsiuk
Male 14-pin, angled 2.54mm socket for printing, for IDC plug, RoHS
MPPT charge controller module for photovoltaic systems. It supports battery charging with 18V and 3A current, it can charge Lead Acid batteries.
2-position waterproof self-locking rotary switch, 19 mm in diameter, in a stainless steel housing. Green colour
BMS module for four Li-Ion cells with a voltage of 14.8 V. It has the function of charging with balancer, discharging and over-discharge protection. The cells can be charged with a continuous current of up to 30 A
Temperature sensor based on a DS18B20 chip replacement. It is enclosed in a waterproof measuring probe. It has a 2 m cable and communicates via a 1-Wire interface