Category: Main categories
Subcategories
There are 24131 products.
The cable is terminated on one side with a female connector JST RCY (BEC)
Finder relay 66.82.8.230.4300 with 30 A contact current and a 230 V AC coil provides reliable load control in industrial applications. Thanks to its solid construction, high insulation and wide temperature range, it is ideal for demanding operating conditions.
Precision knife blade. Made of stainless steel, it ensures precise small cuts
Evaluation kit with WiFi/Bluetooth module BLE ESP32-WROOM-32U. The board is equipped with a USB-UART converter, which through the microUSB connector allows you to power and program the board. Espressif ESP32-DevKitC-32U
PR contact for removing debris during operation of devices. AG Termopasty ART.AGT-008
Permanent cylindrical neodymium magnet with a diameter of 7 mm and a height of 5 mm. Set of 10 pcs
Plastic enclosure Z56 lightgray ABS
Board with the ATmega4809 microcontroller from the AVR family and the u-blox W102 WiFi module. There are 14 I/O lines, 5 PWM channels, 6 analog inputs and the IMU LSM6DS3TR system at your disposal. Arduino ABX00021
6-wire cable, 10 cm long, with a micro 5264 female plug at both ends
WiFi module based on ESP8266. The module has a built-in antenna and USB-UART converter. The module can be programmed in Lua (under the control of the NodeMCU firmware) or in the Arduino environment. 10 GPIO lines are available which each can be configured to work as PWM, I2C.
Tape with RGB LEDs WS2812B 1m long, 144 LEDs per meter, the diodes are mounted on a flexible white PCB. The diodes are not protected against water.
A flexible cable type AB (tape) with a length of 20 cm. The tape has 20 wires and a pitch of 0,5 mm
Universal positive voltage stabilizer LM317T, regulated voltage 1.2-37 V, maximum current efficiency 1.5 A, housing TO-220.
Permanent cylindrical neodymium magnet with a diameter of 12 mm and a height of 6 mm. Set of 5 pcs
Connector for connecting the 24-pin tape with 0.5 mm pitch to the printed circuit board
The USB Step-Up 9V 6W converter module converts the input voltage in the range of 4.2-5.2V to a constant output voltage of 9V, with a maximum current of 1A and a conversion efficiency of 96%. The device can operate in a wide temperature range, from -40°C to 85°C, which makes it ideal for powering various electronic devices in harsh environments.
LED 3 mm GREEN 570nm "MILK"; 60º angle; light intensity 120 mcd (20mA) (type 2.1V)
Din rail enclosure Z103 lightgray ABS V0