Pololu 3261 - 4.4:1 Metal Gearmotor 25Dx48L mm LP 12V with 48 CPR Encoder
ID: 562791
zł147.45
Tax included
zł119.88 tax excl.
This gearmotor consists of a low-power, 12 V brushed DC motor combined with a 4.4:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 211.2 counts per revolution of the gearbox’s output shaft.
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Overview:
These cylindrical brushed DC gearmotors are available in a wide range of gear ratios and with five different motors (two power levels of 6V motors and three power levels of 12V motors). The gearmotors all have the same 25 mm diameter case and 4 mm diameter gearbox output shaft, so it is generally easy to swap one version for another if your design requirements change (though the length of the gearbox tends to increase with the gear ratio). All versions are also available with an integrated 48 CPR quadrature encoder on the motor shaft. Please see the 25D metal gearmotor comparison table for detailed specifications of all our 25D metal gearmotors. This dynamically-sortable table can help you find the gearmotor that offers the best blend of speed, torque, and current-draw for your particular application. A more basic comparison table is available below:
| Rated Voltage | Motor Type | Stall Current @ Rated Voltage | No-Load Speed @ Rated Voltage | Approximate Stall Torque @ Rated Voltage |  With Encoder |  Without Encoder |
|---|---|---|---|---|---|---|
| 6 V | high-power (HP) |
6.5 A | 10,000 RPM | 5 oz-in | 1:1 HP 6V w/encoder | |
| 2150 RPM | 20 oz-in | 4.4:1 HP 6V w/encoder | 4.4:1 HP 6V | |||
| 990 RPM | 39 oz-in | 9.7:1 HP 6V w/encoder | 9.7:1 HP 6V | |||
| 460 RPM | 75 oz-in | 20.4:1 HP 6V w/encoder | 20.4:1 HP 6V | |||
| 280 RPM | 90 oz-in | 34:1 HP 6V w/encoder | 34:1 HP 6V | |||
| 200 RPM | 115 oz-in | 47:1 HP 6V w/encoder | 47:1 HP 6V | |||
| 130 RPM | 150 oz-in | 75:1 HP 6V w/encoder | 75:1 HP 6V | |||
| 97 RPM | 210 oz-in | 99:1 HP 6V w/encoder | 99:1 HP 6V | |||
| 56 RPM | 350 oz-in | 172:1 HP 6V w/encoder | 172:1 HP 6V | |||
| 6 V | low-power (LP) |
2.4 A | 6200 RPM | 2 oz-in | 1:1 LP 6V w/encoder | |
| 1300 RPM | 8 oz-in | 4.4:1 LP 6V w/encoder | 4.4:1 LP 6V | |||
| 590 RPM | 17 oz-in | 9.7:1 LP 6V w/encoder | 9.7:1 LP 6V | |||
| 290 RPM | 33 oz-in | 20.4:1 LP 6V w/encoder | 20.4:1 LP 6V | |||
| 170 RPM | 50 oz-in | 34:1 LP 6V w/encoder | 34:1 LP 6V | |||
| 120 RPM | 65 oz-in | 47:1 LP 6V w/encoder | 47:1 LP 6V | |||
| 78 RPM | 95 oz-in | 75:1 LP 6V w/encoder | 75:1 LP 6V | |||
| 58 RPM | 130 oz-in | 99:1 LP 6V w/encoder | 99:1 LP 6V | |||
| 34 RPM | 200 oz-in | 172:1 LP 6V w/encoder | 172:1 LP 6V | |||
| 25 RPM | 220 oz-in | 227:1 LP 6V w/encoder | 227:1 LP 6V | |||
| 15 RPM | 300 oz-in | 378:1 LP 6V w/encoder | 378:1 LP 6V | |||
| 11 RPM | 400 oz-in | 499:1 LP 6V w/encoder | 499:1 LP 6V | |||
| 12 V | high-power (HP) |
5.6 A | 10,200 RPM | 5.5 oz-in | 1:1 HP 12V w/encoder | |
| 2250 RPM | 23 oz-in | 4.4:1 HP 12V w/encoder | 4.4:1 HP 12V | |||
| 1030 RPM | 44 oz-in | 9.7:1 HP 12V w/encoder | 9.7:1 HP 12V | |||
| 500 RPM | 85 oz-in | 20.4:1 HP 12V w/encoder | 20.4:1 HP 12V | |||
| 290 RPM | 120 oz-in | 34:1 HP 12V w/encoder | 34:1 HP 12V | |||
| 210 RPM | 165 oz-in | 47:1 HP 12V w/encoder | 47:1 HP 12V | |||
| 130 RPM | 240 oz-in | 75:1 HP 12V w/encoder | 75:1 HP 12V | |||
| 100 RPM | 300 oz-in | 99:1 HP 12V w/encoder | 99:1 HP 12V | |||
| 12 V | medium-power (MP) |
2.1 A | 7800 RPM | 2.7 oz-in | 1:1 MP 12V w/encoder | |
| 1700 RPM | 11 oz-in | 4.4:1 MP 12V w/encoder | 4.4:1 MP 12V | |||
| 770 RPM | 22 oz-in | 9.7:1 MP 12V w/encoder | 9.7:1 MP 12V | |||
| 370 RPM | 42 oz-in | 20.4:1 MP 12V w/encoder | 20.4:1 MP 12V | |||
| 220 RPM | 63 oz-in | 34:1 MP 12V w/encoder | 34:1 MP 12V | |||
| 160 RPM | 85 oz-in | 47:1 MP 12V w/encoder | 47:1 MP 12V | |||
| 100 RPM | 125 oz-in | 75:1 MP 12V w/encoder | 75:1 MP 12V | |||
| 76 RPM | 165 oz-in | 99:1 MP 12V w/encoder | 99:1 MP 12V | |||
| 43 RPM | 250 oz-in | 172:1 MP 12V w/encoder | 172:1 MP 12V | |||
| 33 RPM | 320 oz-in | 227:1 MP 12V w/encoder | 227:1 MP 12V | |||
| 12 V | low-power (LP) |
1.1 A | 5600 RPM | 2 oz-in | 1:1 LP 12V w/encoder | |
| 1200 RPM | 8 oz-in | 4.4:1 LP 12V w/encoder | 4.4:1 LP 12V | |||
| 560 RPM | 15 oz-in | 9.7:1 LP 12V w/encoder | 9.7:1 LP 12V | |||
| 260 RPM | 29 oz-in | 20.4:1 LP 12V w/encoder | 20.4:1 LP 12V | |||
| 150 RPM | 43 oz-in | 34:1 LP 12V w/encoder | 34:1 LP 12V | |||
| 110 RPM | 60 oz-in | 47:1 LP 12V w/encoder | 47:1 LP 12V | |||
| 71 RPM | 85 oz-in | 75:1 LP 12V w/encoder | 75:1 LP 12V | |||
| 55 RPM | 115 oz-in | 99:1 LP 12V w/encoder | 99:1 LP 12V | |||
| 31 RPM | 180 oz-in | 172:1 LP 12V w/encoder | 172:1 LP 12V | |||
| 23 RPM | 240 oz-in | 227:1 LP 12V w/encoder | 227:1 LP 12V | |||
| 14 RPM | 320 oz-in | 378:1 LP 12V w/encoder | 378:1 LP 12V | |||
Note: Stalling or overloading gearmotors can greatly decrease their lifetimes and even result in immediate damage. For these gearboxes, the recommended upper limit for instantaneous torque is 200 oz-in (15 kg-cm); we strongly advise keeping applied loads well under this limit. Stalls can also result in rapid (potentially on the order of a second) thermal damage to the motor windings and brushes, especially for the versions that use high-power (HP) motors; a general recommendation for brushed DC motor operation is 25% or less of the stall current.
In general, these kinds of motors can run at voltages above and below their nominal voltages; lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor.
Dimensions:
| Size: | 25D x 60L mm |
|---|---|
| Weight: | 95 g |
| Shaft diameter: | 4 mm |
General specifications:
| Gear ratio: | 4.4:1 |
|---|---|
| Free-run speed @ 12V: | 1200 rpm |
| Free-run current @ 12V: | 100 mA |
| Stall current @ 12V: | 1100 mA |
| Stall torque @ 12V: | 8 oz·in |
| Free-run speed @ 6V: | 600 rpm1 |
| Stall current @ 6V: | 550 mA1 |
| Stall torque @ 6V: | 4 oz·in1 |
| Lead length: | 8 in2 |
| Motor type: | 1.1A stall @ 12V (LP 12V) |
| Encoders?: | Y |
Notes:
- 1 This motor will run at 6 V but is intended for operation at 12 V.
- 2 May vary by a few inches.
562791
Data sheet
- DC motor power
- LP
- Gear material
- Metal
- Gear ratio
- 4.4:1
- Rotation speed
- 1200RPM
- Shaft diameter
- 4 mm
- Shaft shape
- D
- Obustronny wał silnika
- Tak
- Power supply voltage
- 12V
You might also like
Dual VNH3SP30 Motor Driver Carrier MD03A
zł1,212.68
24h
Available quantity: 2
Available
Adapter that allows you to easily mount the wheels on a motor with a shaft diameter of 4 mm using screws size 4-40. The hub fits both round and D-shaped shafts. Pololu 1081
zł40.92
Delivery date unknown
No product available!
Pololu Universal Aluminum Mounting Hub for 4mm Shaft, M3 Holes (2-Pack)
zł40.95
24h
Available quantity: 1
Available
A set of adapters (adapter) from the popular 4 mm to 12 mm motor shaft, wheel holders from RC models. Pololu 2684
zł22.80
24h
Available quantity: 5
Available
These aluminum gearmotor brackets let you securely mount Pololu’s 25D mm metal gearmotors to your project. The brackets are sold in pairs, and each bracket includes two M3 screws for securing the motor to the bracket. Each bracket also features seven mounting holes and twelve mounting slots for M3 or #4-size screws (not included), giving you a variety of mounting options.
zł42.59
24h
Available quantity: 3
Available
Other products in the same category (16)
Motor with 25 mm diameter and 71 mm length, 172:1 metal gear, 12 V operating voltage, 0,2 A to 2,1 A power consumption, 43 RPM speed, 18 maximum torque and 48 CPR encoder. Pololu 4868
zł223.02
6 weeks
No product available!
Motor with 25 mm diameter and 69 mm length, 75:1 metal gear, 6 V operating voltage, 0,25 A to 2,4 A power consumption, 78 RPM speed, 6,8 maximum torque and 48 CPR encoder. Pololu 4826
zł223.02
6 weeks
No product available!
Motor with 25 mm diameter and 56 mm length, 172:1 metal gear, 12 V operating voltage, 0,1 A to 1,1 A power consumption, 31 RPM speed and 13 maximum torque. Pololu 3256
zł126.01
6 weeks
No product available!
Motor with 25 mm diameter and 52 mm length, 74:1 metal gear, 6 V operating voltage, 0,25 A to 2,4 A power consumption, 120 RPM speed and 4,7 maximum torque. Pololu 1585
zł113.79
6 weeks
No product available!
Motor with 25 mm diameter and 50 mm length, 20,4:1 metal gear, 12 V operating voltage, 0,2 A to 2,1 A power consumption, 370 RPM speed and 3 maximum torque. Pololu 3227
zł126.01
6 weeks
No product available!
Motor with 25 mm diameter and 48 mm length, 4,4:1 metal gear, 12 V operating voltage, 0,02 A to 1,1 A power consumption, 1200 RPM speed and 0,6 maximum torque. Pololu 3249
zł126.01
6 weeks
No product available!
Motor with 25 mm diameter and 65 mm length, 20,4:1 metal gear, 12 V operating voltage, 0,1 A to 1,1 A power consumption, 260 RPM speed, 2 maximum torque and 48 CPR encoder. Pololu 4883
zł223.02
6 weeks
No product available!
75:1 Metal Gearmotor 25Dx54L mm HP with 48 CPR Encoder
zł164.72
24h
Available quantity: 1
Available
Motor with 25 mm diameter and 73 mm length, 378:1 metal gear, 6 V operating voltage, 0,25 A to 2,4 A power consumption, 15 RPM speed, 22 maximum torque and 48 CPR encoder. Pololu 4830
zł223.02
6 weeks
No product available!
Motor with 25 mm diameter and 67 mm length, 47:1 metal gear, 12 V operating voltage, 0,3 A to 5,6 A power consumption, 210 RPM speed, 12 maximum torque and 48 CPR encoder. Pololu 4845
zł237.64
24h
Available quantity: 1
Available
Motor with 25 mm diameter and 54 mm length, 99:1 metal gear, 12 V operating voltage, 0,1 A to 1,1 A power consumption, 55 RPM speed and 8 maximum torque. Pololu 3255
zł126.01
6 weeks
No product available!
Motor with 25 mm diameter and 65 mm length, 20,4:1 metal gear, 12 V operating voltage, 0,2 A to 2,1 A power consumption, 370 RPM speed, 3 maximum torque and 48 CPR encoder. Pololu 4863
zł223.02
6 weeks
No product available!
Motor with 25 mm diameter and 63 mm length, 9,7:1 metal gear, 12 V operating voltage, 0,3 A to 5,6 A power consumption, 1030 RPM speed, 3,2 maximum torque and 48 CPR encoder. Pololu 4842
zł237.64
6 weeks
No product available!
Motor with 25 mm diameter and 63 mm length, 4,4:1 metal gear, 6 V operating voltage, 0,55 A to 6,5 A power consumption, 2150 RPM speed, 1,5 maximum torque and 48 CPR encoder. Pololu 4801
zł237.64
6 weeks
No product available!
Motor with 25 mm diameter and 54 mm length, 75:1 metal gear, 12 V operating voltage, 0,3 A to 5,6 A power consumption, 130 RPM speed and 17 maximum torque. Pololu 3206
zł140.45
6 weeks
No product available!
Motor with 25 mm diameter and 67 mm length, 34:1 metal gear, 12 V operating voltage, 0,2 A to 2,1 A power consumption, 220 RPM speed, 4,5 maximum torque and 48 CPR encoder. Pololu 4864
zł223.02
6 weeks
No product available!
This gearmotor consists of a low-power, 12 V brushed DC motor combined with a 4.4:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 211.2 counts per revolution of the gearbox’s output shaft.