Light & Motor Driver V1.0 - universal driver for DC motors and LED
ID: 588825
DRI0050
zł43.76
Tax included
zł35.58 tax excl.
Universal driver for DC and LED motors. It can work with a supply voltage from 5 V to 24 V and a load up to 10 A. DFRobot DRI0050
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Universal driver for DC and LED motors based on a MOSFET transistor. It can work with a supply voltage from 5 V to 24 V and a load up to 10 A. It offers 4 control modes: UART interface, USB, analog input or using Python code. It can be used to control a wide range of devices, including fans, pumps, DC motors, and LED strips up to 5 m in length. Full documentation and application examples are available on the product page.
Features
- Input voltage range: 5V to 24V
- Maximum control current: 10 A
- PWM duty cycle adjustment range: 0 to 255
- PWM frequency adjustment range: 183 Hz to 46 875 Hz
- Number of PWM channels: 1
- Start/Stop button
- Control Mode:
- Adjustment by means of an external potentiometer
- UART interface
- USB communication
- Control via Python code
- USB type C interface
- UART interface: PH2.0-4P
- Connector for external potentiometer
- Mounting hole: 30 x 50 mm, diameter 3.1 mm
- Dimensions: 37 x 57mm
Kit contains
- Light & Motor Driver V1.0
- Gravity cable 4-pin
588825
Data sheet
- Output current
- 10A
- Number of channels
- 1
- Supply voltage min
- 5 V
- Supply voltages max
- 24 V
You might also like
Motor with 20 mm diameter and 44 mm length, 100:1 metal gear, 12 V operating voltage, 0.08 A to 1.6 A power consumption, 140 RPM speed and 6.1 kg*cm maximum torque. Pololu 3490
zł145.39
Delivery date unknown
No product available!
Motor with 37 mm diameter and 57 mm length, 100:1 metal gear, 12 V operating voltage, 0,2 A to 5,5 A power consumption, 100 RPM speed and 34 maximum torque. Pololu 4745
zł156.11
Delivery date unknown
No product available!
DC motor equipped with a plastic gear 48:1 with a cut shaft on both sides and an additional shaft for connecting an encoder
zł5.06
24h
Available quantity: 50
Available
Other products in the same category (16)
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3″ × 0.8″ board supports a wide 6.5 V to 40 V voltage range and is efficient enough to deliver a continuous 21 A without a heat sink.
zł660.26
24h
Available quantity: 2
Available
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board without connectors. Pololu 5044
zł534.64
6 weeks
No product available!
HAT with two-channel DC motor driver for Raspberry Pi. It has an operating voltage from 6 to 24 V and a continuous current of up to 10 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron HAT-MDD10
zł117.32
24h
Available quantity: 2
Available
2x1.2A DC Motor Driver is a dual controller of DC motors with a Gravity connector, supplied with 2.5 ... 12V voltage with a maximum current consumption of 1.2A (3.2A peak) per channel. DFRobot DRI0044-A
zł40.02
24h
Available quantity: 3
Available
Dual-channel electric motors controller (H-bridge) Arduino Motor Shield Rev3 with L298 for controlling two DC motors or one stepper motor with the possibility of using an electronic brake.
zł128.01
24h
Available quantity: 1
Available
This compact expansion board plugs directly into the GPIO header on a Raspberry Pi B+, A+, or Pi 2 and provides an easy and low-cost solution for driving a pair of small brushed DC motors. Pololu 2753
zł45.84
24h
Available quantity: 1
Available
A two-channel DC motor controller with an I2C interface. It is powered from 4.5 V to 48 V and can deliver up to 1.8 A per motor. A board with connectors for mounting. Pololu 5065
zł107.33
6 weeks
No product available!
RoboClaw 2x60AHV Motor Controller (V7C) is a two-channel DC motor driver, operating voltage: 10,5 to 60V, maximum continuous current: 60A, the ability to easily implement feedback loops with PID controller, security systems. Pololu 3583
zł2,310.90
6 weeks
No product available!
Module with a single-channel driver of DC motors VNH2SP30. It allows you to control a DC motor with a supply voltage of up to 16 V and a current consumption of up to 30 A. Mini Monster Moto Driver
zł97.90
6 weeks
No product available!
Module with two DRV8830 DC motor drivers. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 105020010
zł65.28
24h
Available quantity: 1
Available
Pololu Simple High-Power Motor Controller 24v12 (Fully Assembled)
zł646.75
24h
Available quantity: 2
Available
ESC type controller for a DC motor with a supply voltage of 3.7 V to 5 V. It offers a maximum output current of up to 1.5 A and allows you to control two motors independently
zł71.91
24h
Available quantity: 2
Available
RoboClaw 2x160A Motor Controller is a two-channel DC motor driver, operating voltage: 10.5..60V, maximum continuous current: 120A, easy implementation of feedback loops with PID controller, safety systems. Pololu 3582
zł4,240.81
6 weeks
No product available!
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with connectors for assembly. Pololu 5049
zł295.54
6 weeks
No product available!
DC motor driver with voltage 4.5..28V and maximum continuous current of 2.6A. It has the ability to easily implement the feedback loop and numerous control interfaces. Polol 3143
zł299.62
6 weeks
No product available!
Pololu Simple Motor Controller 18v7 (Fully Assembled)
zł767.30
24h
Available quantity: 1
Available
Universal driver for DC and LED motors. It can work with a supply voltage from 5 V to 24 V and a load up to 10 A. DFRobot DRI0050