KAmod I2C Hub Qwire - I2C bus splitter
ID: 1197605
5902186333703
zł9.90
Tax included
zł8.05 tax excl.
I2C bus splitter enabling connection of multiple peripheral modules to a single I2C interface, equipped with Qwire connectors compatible with Qwiic and STEMMA QT, a KAmod I2C connector, and goldpin headers. Kamami KAmod I2C Hub Qwire
Description
The KAmod I2C Hub Qwire splitter is designed to expand the I2C bus in projects based on microcontrollers and prototyping platforms. The module allows parallel connection of multiple sensors, communication modules, or other peripheral devices to a single I2C interface without the need for additional wiring or intermediary boards.
The board is equipped with four I2C Qwire connectors in the JST SH 4-pin 1 mm standard, compatible with Qwiic and STEMMA QT systems, enabling fast, tool-free module interconnection. In addition, an I2C connector compliant with the KAmod standard is provided for direct connection of expansion modules from the KAmod series, along with a 2.54 mm pitch goldpin header exposing I2C bus signals and power lines.
The board includes 4.7 kΩ pull-up resistors for the SDA and SCL lines, which can be independently disconnected using jumpers, simplifying integration with existing systems that already include their own pull-up resistors. A power indicator LED allows quick verification of supply voltage presence, while the option to disconnect the LED helps reduce current consumption in low-power applications. The module does not include an active bus control IC and therefore does not allow simultaneous connection of devices sharing the same I2C address.
Features
- Number of I2C Qwire connectors: 4
- Qwire connector type: JST SH 4-pin 1 mm
- Connector compatibility: Qwiic, STEMMA QT
- KAmod I2C connector: Present
- Goldpin header: 2.54 mm pitch
- Goldpin signals: SCL, SDA, 3.3 V, GND
- I2C pull-up resistors: 4.7 kΩ
- Independent pull-up resistor disconnection: Yes
- Power indicator LED: Yes
- LED disconnection option: Yes
- Active I2C bus controller: None
- Dimensions: 24 x 37 mm
1197605
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Module with 8 analog inputs for current measurement in the range of 0 to 20 mA or 4 to 20 mA. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP3082ADAM
zł225.93
4 weeks
No product available!
Module with 8 inputs for data acquisition from DS18B20 temperature sensors. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP3066ADAM
zł212.73
4 weeks
No product available!
Module with 8 digital inputs and 8 digital outputs. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP8028ADAM
zł201.02
24h
Available quantity: 1
Available
Module with 16 digital outputs. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP8027ADAM
zł214.28
24h
Available quantity: 2
Available
Module with 16 digital inputs. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP8026ADAM
zł241.40
4 weeks
No product available!
Module with 8 digital inputs and 4 relays with a maximum switching current of 2 A. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP8024ADAM
zł222.81
24h
Available quantity: 3
Available
A 24-channel input/output port expander module controlled by an I2C interface. It was based on the CH423 chip and equipped with a Gravity connector. DFRobot DFR0979
zł22.83
24h
Available quantity: 1
Available
A module with a 16-channel input/output port expander controlled by an I2C interface. It was based on the MCP23017 chip and equipped with a Gravity connector. DFRobot DFR0626
zł26.60
4 weeks
No product available!
Module with 8 inputs for data acquisition from 0-24 mA analog current inputs. It communicates via RS485 interface and supports Modbus RTU protocol. The board is enclosed in an industrial enclosure. GM1008
zł259.58
24h
Available quantity: 2
Available
Module with 4 digital inputs and 4 digital outputs. It communicates via RS485 interface and supports Modbus RTU protocol. The board is enclosed in an industrial enclosure. MA01-AXCX4040
zł99.97
24h
Available quantity: 3
Available
An 4-channel I2C expander module, which is based on the TCA9546A chip. It allows connecting several devices with the same address to a single I2C interface. Adafruit 5664
zł20.02
24h
Available quantity: 2
Available
A 4-channel I2C expander module, which is based on the TCA9546A chip. It allows connecting several devices with the same address to a single I2C interface. Adafruit 5663
zł20.16
24h
Available quantity: 1
Available
RS485 hub with DIN rail mounting capability. It is equipped with one RS485 input port and 8 RS485 output ports. Designed for communication within industrial networks. Waveshare RS485-HUB-8P
zł193.29
24h
Available quantity: 65
Available
16-channel IO expander with 7 analog inputs with 10-bit resolution. Communicates via USB interface. It has compact dimensions, making it suitable for small devices. Version with connector at the top. Numato Lab GP160002
zł455.59
24h
Available quantity: 2
Available
32-channel IO expander with 7 analog inputs with 10-bit resolution. Communicates via USB interface. It has compact dimensions, making it suitable for small devices. Version with connector on top. Numato Lab GP320002
zł499.00
3 weeks
No product available!
32-channel IO expander with 7 analog inputs with 10-bit resolution. Communicates via USB interface. It has compact dimensions, making it suitable for small devices. Version with connector at the bottom. Numato Lab GP320002-B
zł489.00
3 weeks
No product available!
I2C bus splitter enabling connection of multiple peripheral modules to a single I2C interface, equipped with Qwire connectors compatible with Qwiic and STEMMA QT, a KAmod I2C connector, and goldpin headers. Kamami KAmod I2C Hub Qwire