

zł269.70 tax excl.
Universal charger with dual charging sockets designed for Li-Ion, LiPo, LiFe, LiHV, Pb and Ni-MH batteries. It has a power output of up to 500 watts, allowing up to 25 amps of charging current. ToolkitRC M6D
ToolkitRC M6D is a universal dual charger designed for Li-Ion, LiPo, LiFe, LiHV, Pb and Ni-MH batteries. It is powered by a DC XT60 connector, and is equipped with two XT60 sockets for battery connection and two balancer connectors. The charger can handle packs from 1S to 6S for Li-Ion, LiFe, LiHV, LiPo batteries and from 1S to 16S for Ni-MH. It allows charging two packs at the same time and offers up to 500 watts of power (for synchronous operation, this allows charging up to 25A, or 2 x 15A for asynchronous operation). The ToolkitRC M6D has a built-in 2.4" LCD display, as well as buttons and a dial for controlling the unit. Cooling during charging is provided by an aluminum heat sink and built-in fan.
The software update is carried out via USB 3.0. Thanks to its small size, the device is very handy and will work in all conditions.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
A set of XT60 connectors (male plug and female socket with covers) with a maximum forward current of 60 A. It works well as a battery connector or a power connector in RC models. Amass XT60
20 cm long cable with XT60 plug and two banana plugs. It allows you to connect a battery with an XT60 socket to the charger
10 cm long cable with plug and XT60 socket. It allows you to connect a battery with an XT60 socket, e.g. to a charger
No product available!
Universal charger designed for 1-8S Li-Ion, LiPo, LiFe, LiHV, Pb and Ni-MH batteries. It has a built-in function for generating and measuring PWM, PPM and S.BUS signals. ToolkitRC M9
Universal charger with two charging sockets designed for Li-Ion, LiPo, LiFe, LiHV, Pb and Ni-MH batteries. It has a power of up to 700 W, which allows charging with a current of up to 25 A. It has a built-in power supply. ToolkitRC M6DAC
Mini charger designed for single-purpose Lipo batteries. It enables simultaneous charging of 4 batteries. It is powered by a USB type C ISDT UC4 connector
No product available!
A compact charger with a built-in balancer dedicated to LiPo, LiFe and LiHV 1S-6S and Ni-MH 5S-12S packages. Powered directly from the AC network, does not require an additional power supply. ToolkitRC C6
ToolkitRC Q6AC is a versatile modeling charger that supports up to four batteries at a time, compatible with LiPo, LiFe, Li-Ion, NiMH and Pb cell types. It provides up to 400W of power when powered by AC mains and up to 1000W when powered by DC external power, and also offers fast charging via USB-C PD (65W) and USB-A Fast Charge (18W) ports.
Universal charger designed for 1-4S LiPo, LiHv and LiFe batteries. It has a compact size and a built-in 1.54" LCD IPS display. ToolkitRC M4
A universal charger with four charging sockets designed for Li-Ion, LiPo, LiFe, LiHV, Pb and Ni-MH batteries. It has a built-in power supply with power of up to 200 W, which allows charging with a current of up to 5 A. ToolkitRC Q4AC
No product available!
Universal charger for 1-6S Li-Ion, LiPo, LiFe, LiHV, Pb, Ni-Cd and Ni-MH batteries. It has a detachable power supply (can be powered from the mains or via the XT60 DC connector), is equipped with an XT60 socket and a balancer connector. ISDT 608AC
No product available!
ToolkitRC M6AC is an advanced balancer charger dedicated to a wide range of lithium, nickel and lead-acid batteries. Charging capacity up to 300 W, support for PWM, PPM and SBUS measurement modes and laboratory power supply functions make it a versatile tool for modelers, electronics engineers and users of multi-cell power systems. Compact form, precise parameter control and wide input voltage range provide flexibility for work in the workshop and in the field.
Compact charger dedicated to 2S-3S LiPo and LiHv packs with built-in balancer. Powered directly from AC mains, no additional power supply required. ToolkitRC C3
The BLOW 12 V / 6 A battery charger is an automatic device designed for charging and regenerating batteries in vehicles and equipment powered by 12 V. Thanks to its microprocessor, seasonal modes, and advanced safety systems, it ensures safe and effective operation. Its application in cars, motorcycles, boats, lawnmowers, and other devices makes it a versatile workshop tool with high efficiency and modern functionality.
Device for discharging LiPo, LiHv, LiFe, LiIon packets. Supports packages from 2S to 8S with a maximum discharge power of 80 W. ISDT FD-100
No product available!
Battery charger Blow 12V/10A – 24V/5A is an advanced device designed for charging and maintaining a wide range of batteries used in vehicles and battery-powered devices. Automatic modes that adjust charging parameters, a built-in LCD display, and a battery regeneration function make this charger an ideal tool for both individual users and professionals. It is suitable for passenger cars, trucks, motorcycles, boats, and emergency power systems.
The Blow 12V 2A charger is a practical and safe solution for charging gel, AGM, and lead-acid batteries in vehicles, emergency power systems, or recreational equipment. Its compact size, automatic operation, and LED visual indicators make it a convenient tool for everyday use.
Universal charger designed for Li-Ion, LiPo, LiFe, LiHV, Ni-Cd and Ni-MH batteries. It is powered by a USB type C connector, is equipped with an XT60 socket and a balancer connector. ISDT PD60
No product available!
Microprocessor charger with balancer (12 V DC supply), loads LiIon, LiPo, LiFe, Ni-Cd, Ni-MH, PB packs.
No product available!
Universal charger with dual charging sockets designed for Li-Ion, LiPo, LiFe, LiHV, Pb and Ni-MH batteries. It has a power output of up to 500 watts, allowing up to 25 amps of charging current. ToolkitRC M6D