DFRobot FIT0478

An expansion board equipped with a 24-pin FPC connector, designed for the SeeedStudio XIAO series boards. Enables smooth control of the ePaper display. Seeed Studio 105990172

Driver enabling operation of displays with an RGB-666 connector with resolutions from 480x272 to 800x600 pixels. Equipped with an ESP32-S3 microcontroller with 16 MB Flash memory and 8 MB PSRAM memory. Powered and programmable via USB Type-C connector. Adafruit 5800

The expansion module (shield) is designed for Feather nRF52840 boards. It enables easy connection of 16x32, 32x32 and 64x32 matrix displays. Requires self-assembly. Adafruit 4702

Plastic semi-circular lens with an outer diameter of 40 mm. Adafruit 3853

The ESL-Gateway-AP base station is a key infrastructure component for electronic label systems based on e-paper technology. With WiFi and BLE connectivity and PoE power support, it enables centralized and wireless content management on ESL labels in commercial and industrial environments. Ideal for automated real-time labeling of shelves, products, and assets.

FFC tape enabling seamless connection of DSI displays with the Raspberry Pi 5 minicomputer. Black EMI shielding foil on both sides of the tape increases anti-interference efficiency, protecting signals against interference from the environment. Waveshare Pi5-Display-Cable-500mm

The driver for e-Paper displays with a built-in ESP32 module that provides communication via WiFi and Bluetooth. The board allows you to display images on e-Paper displays from a computer or smartphone. Waveshare e-Paper ESP32 Driver Board

Touch panel for displays with a diagonal of 5.6 ", 126.5x101mm, resistive touchpanel, tape for ZIFF 4 1mm connector

Touchpanel for 128x64 A-series displays, 81.8x52.2mm, 2.54 mm IDC connector

The expansion module (shield) is designed for Teensy 4.0 and Teensy 4.1 boards. It allows you to easily connect displays from the SmartMatrix series. Adafruit 4828

Driver for e-Paper displays in the form of an overlay for Arduino and Nucleo. The SPI interface is used for communication with the controller. Waveshare e-Paper Shield

Module with I2C driver based on the HT16K33 system. It is equipped with STEMMA QT connectors and is dedicated to 8x8 LED matrix displays with a diagonal of 1.2". Adafruit 1048

Extension module dedicated to matrix displays with HUB75 interface. Designed for Feather RP2040, M0 and M4 series tiles. Adafruit 3036

The driver with the TPIC6C596 system allows you to control 7-segment displays using three signal lines. Serial connection of controllers is possible. SparkFun WIG-13279

HDMI mini cable (male) to VGA (female). It allows you to connect displays with VGA support on a mini HDMI connector to the VGA output. Waveshare Mini HDMI Male to VGA Female Cable

The LED_CGG128064M-XXW is a white LED backlight designed for COG displays of the "CF" series and graphic displays of the "MN" series. It operates at a voltage of approximately 3.3 V with a maximum current of 20 mA.