.png)
- Out-of-Stock
Sabaj A4 - 2x80W audio amplifier with Bluetooth module
ID: 1181181
5906623443567
Stereo audio amplifier with Bluetooth 4.2 communication. It can be powered with the voltage from 19 to 24 V and has two outputs with a power of 80 W
Description
Digital stereo audio amplifier with Bluetooth 4.2 communication. It has two channels with a power of 50 W and can work with speakers with an impedance of 4 Ω or headphones. The user can additionally connect a subwoofer. The module is supplied with the voltage ranging from 19 to 24 V. It is equipped with an OLED display and is controlled by buttons and an IR remote control.
The audio input can be connected via RCA connectors, coaxial cable, USB, optical input or using the built-in Bluetooth 4.2 wireless communication. The outputs are placed on the loudspeaker connectors and as a 3.5 mm Jack headphone output. Aesthetically made, it will work as an element of a home audio system.
Features
- Input: USB, Bluetooth, Optical, Coaxial, Analog (AUX)
- Signal to noise ratio:> 90dB
- THD + N: 90dB
- Resolution: 24 bit
- Maximum Sampling Rate: 96kHz (USB), 192kHz (Optical, Coaxial)
- USB input compatible with Windows XP, 7, 8, 8.1, 10, Mac OSX, Linux
- Power consumption: 50 W
- Speaker impedance: 4 Ω
- Headphone output: 2 x 60 mW, 32 Ω
- Voltage range: DC 19 to 24V
- Power: up to 80 W per channel
- Dimensions: 150 x 137 x 46 mm
Kit contains
- Sabaj A4 amplifier
- IR remote control
- USB cable
- Power Supply
1181181
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
Audio amplifier module with three output channels. It can be powered with the voltage from 12 to 24 V and has two outputs with a power of 50 W (left and right) and one with a power of 100 W (bass)
zł114.72
24h
Available quantity: 1
Available
MP3 panel with a HiFi amplifier for installation in an audio device. It allows you to play files from USB memory, SD card, via AUX and Bluetooth. It has a built-in FM receiver
zł61.25
24h
Available quantity: 2
Available
Class D digital audio amplifier with Bluetooth module. It has two channels with a power of 50 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage in the range from 9 to 24 V. NS-01G
zł172.86
24h
Available quantity: 3
Available
Other products in the same category (16)
Adapter board from SODIMM200-2.5 to 2.54mm connectors
Retired
No product available!
Evaluation kit with Bluetooth 5.0 Sparkfun Artemis module. Equipped with a microphone, kmaers and accelerometer. Himax HM01B0 camera included. SparkFun KIT-17071
Retired
No product available!
The expansion module to support two cameras is designed for Raspberry Pi minicomputers. The board allows you to connect two cameras via CSI connectors to one minicomputer connector. ArduCAM B016601
Retired
No product available!
Evaluation kit with LittleBee GW1NR9 FPGA. It offers 8640 LUTs, 6480 Flip-Flops (FF), and has a built-in 8MB (64Mb) SDRAM. The board has 8 MB Flash, FTDI for UART, 8 LEDs and a button. TEC0117-01
Retired
No product available!
Evaluation kit with LittleBee GW1N-1 FPGA chip. Offers 1152 LUTs and 864 Flip-Flops (FF). The board has an FPC connector for the display and a USB type C. Sipeed Lichee Tang Nano
Retired
No product available!
Video splitter for connecting one input device to 2 receivers. Maximum 4K resolution supported. Lanberg SPV-HDMI-0002
Retired
No product available!
Video splitter for connecting one input device to 4 receivers. Maximum 4K resolution supported. Lanberg SPV-HDMI-0004
Retired
No product available!
Video splitter for connecting one input device to 8 receivers. Maximum 4K resolution supported. Lanberg SPV-HDMI-0008
Retired
No product available!
Video switch that allows you to connect 5 input devices to one HDMI receiver. The input signal can be selected using a button on the casing or the included remote control. Lanberg SWV-HDMI-0005
Retired
No product available!
A set of 8 knives, including 4 knives with broken blades and 4 special-purpose knives. Vorel 76280
Retired
No product available!
Module with an analog temperature and humidity sensor based on the SHT10 system. It is characterized by high reliability and stability with low energy consumption. It is compatible with 3.3V and 5V controllers. DFRobot DFR0066
Retired
No product available!
Module with a CCS811 air quality sensor for measuring the concentration of carbon dioxide (eCO2) and volatile organic compounds (TVOC) in the air. It communicates via the I2C interface (Gravity connector). DFRobot SEN0318
Retired
No product available!
Module with a gesture and touch sensor. It recognizes 7 types of gestures and has 5 touch buttons. It is supplied with a voltage ranging from 3.3 V to 5 V and communicates via UART. DFRobot SEN0285
Retired
No product available!
Module with a 3-axis analog MMA7361 accelerometer. There are 3 Gravity connectors on the board (for each axis). The operating range of the sensor can be configured using a DIP switch. DFRobot DFR0143
Retired
No product available!
Module with a UV ultraviolet light sensor VEML6075. Enables measurement of the level of UVA (350-375 nm) and UVB (315-340 nm) radiation. It communicates via the I2C bus. DFRobot SEN0303
Retired
No product available!
The I2C-GPIO converter module is powered with the voltage of 5 V. It allows you to extend the number of digital pins of the Arduino-compatible board with an additional 16 IO pins. DFRobot DFR0013
Retired
No product available!
Stereo audio amplifier with Bluetooth 4.2 communication. It can be powered with the voltage from 19 to 24 V and has two outputs with a power of 80 W