SAMD21 M0-Mini - board with SAMD21G18 microcontroller
ID: 1178180
zł65.07
Tax included
zł52.90 tax excl.
Development board with SAMD21G18 microcontroller. It offers operating frequency up to 48 MHz, 256kB FLASH memory and 32kB SRAM.
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Development board with SAMD21G18 microcontroller. It offers operating frequency up to 48 MHz, 256kB FLASH memory and 32kB SRAM. Has a built-in bootloader. The board can be powered with the voltage from 5 to 9 V, and the outputs work with voltages of 3.3 V. The connectors are available for the user ADC inputs, DAC output, 14 GPIO pins (of which 12 can work in PWM mode) and UART interface. The module is compatible with Arduino Zero and Arduino M0.
Features
- Microcontroller: ATSAMD21G18
- Clock frequency: 48 MHz
- Logic voltage: 3.3V
- Flash memory: 256 KB
- SRAM: 32 kB
- Supply voltage: 5V to 9V (7-9V recommended)
- USB voltage: 5V
- Max current on the I / O pin: 7 mA
- Micro-USB connector for data transmission
- 20 I / O ports
- 6 x 12-bit ADC
- 1 x 10-bit DAC
- 14 x Digital I / O, 12 of which can work in PWM mode
- UART Rx and Tx
- LEDs: Power and Status
- The module is compatible with Arduino Zero and Arduino M0
Kit contains
- SAMD21 M0-Mini module
- Set of goldpin connectors
1178180
Data sheet
- Microcontroller
- ATSAMD21E18
- Core
- Cortex-M0
- Frequency
- 48MHz
- Flash memory
- 256kB
- RAM
- 32kB
- EEPROM memory
- none
- Number of digital pins
- 20
- Number of PWM channels
- 12
- Ilość wejść analogowych
- 6
- ADC
- 1x 12bit
- DAC
- 1x 10bit
- CAN
- none
- USB
- 1
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- GSM/GPRS module
- No
- Logic voltage
- 3,3 V
- MicroSD slot
- No
- Supply voltage min
- 5 V
- Supply voltages max
- 9
You might also like
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-BK
zł4.31
24h
Available quantity: 9
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CA-USBM-10CC-0010-BK
zł3.70
24h
Available quantity: 120
Available
Cable with USB plugs type A and microUSB type B 2.0, cable length 3 m. LANBERG CA-USBM-10CC-0030-BK
Delivery date unknown
No product available!
Other products in the same category (16)
Versatile development board with the ATmega328P microcontroller, which, thanks to its compatibility with Arduino UNO and variety of functions, is an excellent choice for many projects
zł57.56
24h
Available quantity: 193
Available
Development board with ATmega328P microcontroller equipped with 14 I/O lines, 6 PWM channels, 6 analog inputs and FT231X chip. Compatible with Arduino UNO Rev3. Cytron CT-UNO-SE
zł81.45
24h
Available quantity: 1
Available
Board compatible with Arduino, equipped with the ATmega32U4 microcontroller
zł34.94
24h
Available quantity: 4
Available
Microcontroller board based on the ATmega32u4
zł38.57
24h
Available quantity: 3
Available
A small development kit with a SAMD21 ARM Cortex M0 + microcontroller. There are 14 GPIO connectors on the board, including 11 digital and analog pins, 10 PWM, DAC, I2C, UART, SPI, SWD. Compatible with Arduino. Seeed Studio 102010328
Regular pricezł29.90zł27.90
24h
Available quantity: 99
Available
Board compatible with Arduino, based on ATmega328P. Equipped with an area with prototype holes, a breadboard, 12 LEDs, a button and a buzzer. Cytron MAKER-UNO-X
zł65.50
24h
Available quantity: 4
Available
The board is compatible with Arduino, based on the ATmega328P microcontroller from the AVR family, 14 I/O lines, 6 PWM channels, 6 analog inputs are available to the user. The CH340G chip communicates via a USB interface. In addition, it has 12 LEDs, a programmable button and a embedded buzzer. Cytron Uno Maker
zł38.90
24h
Available quantity: 13
Available
The board is equipped with ATSAMD21 microcontroller with ARM Cortex-M0 core. It has connectors and dimensions compatible with the Arduino Uno Rev3. HW-819
zł89.45
24h
Available quantity: 2
Available
Development board equipped with RP2040 microcontroller, RGB LED diodes, buzzer and Qwiic/STEMMA QT connectors. Pin spacing compatible with Arduino Nano. Cytron MAKER-NANO-RP2040
zł47.90
24h
Available quantity: 9
Available
Module with ATmega328 microcontroller from the AVR family (32 kB Flash, 2 kB SRAM, 1 kB EEPROM). The module has 14 I/O lines, 6 PWM channels, 8 analog inputs
zł31.89
Delivery date unknown
No product available!
Development kit with ATSAMD21G18A microcontroller. It has 14 GPIO connectors, including 11 digital and analog pins, 10 PWM, DAC, I2C, UART, SPI, SWD. Compatible with Arduino. Seeed Studio 102010388
zł41.91
24h
Available quantity: 15
Available
Microcontroller board based on the ATmega328
zł40.16
24h
Available quantity: 25
Available
Small evaluation board based on the ATmega328, RoHS
zł72.31
24h
Available quantity: 32
Available
Virtual keyboard module in the form of a small flash drive. It allows you to simulate the keyboard after uploading the appropriate software and pressing a combination of buttons on the computer.
zł119.90
24h
Available quantity: 9
Available
Development board with ATmega328P microcontroller compatible with Arduino Uno Rev3. Waveshare R3 PLUS
zł86.21
24h
Available quantity: 3
Available
Board with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. USB-UART converter based on the ATmega16u2 chip. The user has at his disposal, among others: 54 I/O lines, 14 PWM channels, 16 analog inputs.
zł95.90
24h
Available quantity: 18
Available
Development board with SAMD21G18 microcontroller. It offers operating frequency up to 48 MHz, 256kB FLASH memory and 32kB SRAM.