![HW-819 - ATSAMD21 microcontroller board (compatible with Arduino) HW-819 - ATSAMD21 microcontroller board (compatible with Arduino)](https://kamami.pl/47303-large_default/hw-819-atsamd21-microcontroller-board-compatible-with-arduino.jpg)
![HW-819 - ATSAMD21 microcontroller board (compatible with Arduino) HW-819 - ATSAMD21 microcontroller board (compatible with Arduino)](https://kamami.pl/47303-large_default/hw-819-atsamd21-microcontroller-board-compatible-with-arduino.jpg)
zł59.86 tax excl.
The board is equipped with ATSAMD21 microcontroller with ARM Cortex-M0 core. It has connectors and dimensions compatible with the Arduino Uno Rev3. HW-819
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Development kit equipped with ATSAMD21G18 microcontroller with ARM Cortex-M0 core operating at frequency up to 48 MHz. On the board, the user will find a 3.3 V and 5 V voltage stabilizer, a reset button, a microUSB connector for powering and programming the module, and 25 GPIO outputs, on which such peripherals as ADC inputs, DAC output, PWM outputs and I2C communication interfaces are derived, UART and SPI. The platform can be programmed using the Arduino IDE. The code can be uploaded to the memory via the USB interface using the built-in UF2 bootloader or via the SWD interface. The board can be powered via the USB connector or the DC socket with the voltage from 6 to 24 V.
Data sheet
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CA-USBM-10CC-0010-BK
Module with ATmega4808 microcontroller from AVR family (48 KB Flash, 6 KB SRAM, 256 B EEPROM). The module has 14 I / O lines, 6 PWM channels, 8 analog inputs.
No product available!
The board is compatible with Arduino, based on the ATmega328P microcontroller from the AVR family, 14 I/O lines, 6 PWM channels, 6 analog inputs are available to the user. The CH340G chip communicates via a USB interface. In addition, it has 12 LEDs, a programmable button and a embedded buzzer. Cytron Uno Maker
Board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface
No product available!
Microcontroller board based on the ATmega328P
Development board with ATmega328P microcontroller compatible with Arduino Uno Rev3. Waveshare R3 PLUS
Development kit with ATSAMD21G18A microcontroller. It has 14 GPIO connectors, including 11 digital and analog pins, 10 PWM, DAC, I2C, UART, SPI, SWD. Compatible with Arduino. Seeed Studio 102010388
Microcontroller board based on Leaf Maple, STM32F103RB, USB, RoHS
Board compatible with Arduino, based on ATmega328P. Equipped with an area with prototype holes, a breadboard, 12 LEDs, a button and a buzzer. Cytron MAKER-UNO-X
Development board with SAMD21G18 microcontroller. It offers operating frequency up to 48 MHz, 256kB FLASH memory and 32kB SRAM.
Microcontroller board based on the ATmega32u4
Development board equipped with RP2040 microcontroller, RGB LED diodes, buzzer and Qwiic/STEMMA QT connectors. Pin spacing compatible with Arduino Nano. Cytron MAKER-NANO-RP2040
Board with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. USB-UART converter based on the ATmega16u2 chip. The user has at his disposal, among others: 54 I/O lines, 14 PWM channels, 16 analog inputs.
Virtual keyboard module in the form of a small flash drive. It allows you to simulate the keyboard after uploading the appropriate software and pressing a combination of buttons on the computer.
A small development kit with a SAMD21 ARM Cortex M0 + microcontroller. There are 14 GPIO connectors on the board, including 11 digital and analog pins, 10 PWM, DAC, I2C, UART, SPI, SWD. Compatible with Arduino. Seeed Studio 102010328
Small evaluation board based on the ATmega328, RoHS
Module with ATmega328 microcontroller from the AVR family (32 kB Flash, 2 kB SRAM, 1 kB EEPROM). The module has 14 I/O lines, 6 PWM channels, 8 analog inputs
The board is equipped with ATSAMD21 microcontroller with ARM Cortex-M0 core. It has connectors and dimensions compatible with the Arduino Uno Rev3. HW-819