New products
New products New products
zł9,349.00
4 weeks
zł173.58
Delivery date unknown
R7FA4 PLUS A dev board with R7FA4M1AB3CFM microcontroller - Waveshare 26488
ID: 1189466
5906623485260
zł71.80
Tax included
zł58.37 tax excl.
Development board based on the R7FA4M1AB3CFM microcontroller and compatible with Arduino UNO R4 Minima. Waveshare R7FA4 PLUS A
R7FA4 PLUS A Development Board, Based on R7FA4M1AB3CFM, Compatible with Arduino UNO R4 Minima
R7FA4 PLUS A Development Board
Enhanced version of Arduino UNO R4 Minima
Based on R7FA4M1AB3CFM, Compatible with Arduino UNO R4 Minima
Product Parameters Comparison
| Model |  R7FA4 PLUS A |
 R7FA4 PLUS B |
 ESP32-S3-Nano |
|---|---|---|---|
| Microcontroller | R7FA4 (32-bit ARM Cortex-M4) | R7FA4 (32-bit ARM Cortex-M4) | ESP32-S3R8 (Dual-core 32-bit Xtensa LX7) |
| ESP32-S3FN8 (Dual-core 32-bit Xtensa LX7) | |||
| Clock Frequency | R7FA4: 48MHz | R7FA4: 48MHz | ESP32-S3R8: 240MHz |
| ESP32-S3FN8: 240MHz | |||
| Storage | R7FA4: 256kB Flash, 32kB RAM | R7FA4: 256kB Flash, 32kB RAM | ESP32-S3R8: 384kB ROM, 512kB RAM, 16MB Flash, 8MB PSRAM |
| ESP32-S3FN8: 384kB ROM, 512kB RAM, 8MB Flash | |||
| Wireless communication | None | 2.4GHz WiFi + Bluetooth LE | |
| Operating voltage | Options for 5V/3.3V, support more shields | 3.3V | |
| Power input | 6~24V | 6~21V | |
| Reset button | Lateral, easier to use when connecting with shield | Vertical | |
| IO pin Output current | 8mA | 40mA | |
| Digital pins | 14 | 14 | |
| Analog pins | 6 | 8 | |
| DAC | 2 | None | |
| PWM | 6 | 5 | |
| UART | 1 | 2 | |
| I2C | 1 | 1 | |
| SPI | 1 | 1 | |
| CAN | 1 | None | |
| DC jack | Low profile, shields won't be blocked anymore while connecting | None | |
| power output header | Provides 5V OR 3.3V power output and common-grounding with other boards | None | |
| 5V power output | Up to 2000mA Max, features higher driving capability | 1000mA Max | |
| experimental board | Support, solder pad is provided for DIY interfaces to connect with experimental board | Support | |
Connecting With Waveshare Shields
Connecting With Sorts Of Sensors
Connecting With 2.8inch TFT Touch Shield
* for reference only, please refer to the Package Content for detailed part list
What's On Board
- R7FA4M1AB3CFM
- AMS1117-3.3 3.3V voltage regulator
- MP87595V voltage regulator
- Arduino interfacecompatible with standard Arduino interface, adapting 2.54 pitch solder pad, can be directly connected to experimental board
- ICSP interface
- Power output header3.3V OR 5V, voltage level configured by the onboard power configuration switch, used as power output and common-grounding with other boards
- Power configurationfor configuring R7FA4 PLUS A operating voltage
- SWD indicator
- Power indicator
- User LED
- USB Type-C connectorfor uploading program OR serial port debugging
- Serial port RX/TX indicators
- DC input6V ~ 24V
- Reset button
Pinout definition
Outline dimensions
W zestawie
- R7FA4 PLUS A x1
- USB Type-A to Type-C cable x1
1
2
1189466
Data sheet
- Microcontroller
- R7FA4
- Core
- Cortex-M4
- Frequency
- 48MHz
- Flash memory
- 256kB
- RAM
- 32kB
- EEPROM memory
- none
- Number of digital pins
- 14
- Number of PWM channels
- 6
- Ilość wejść analogowych
- 6
- ADC
- 1x 12bit
- DAC
- 1x 12bit
- CAN
- none
- USB
- 1
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- GSM/GPRS module
- No
- Logic voltage
- 3,3 V/5 V
- MicroSD slot
- No
- Supply voltage min
- 6 V
- Supply voltages max
- 24 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
2.8 inch Arduino Touch LCD Shield
zł85.45
24h
Available quantity: 8
Available
Available
The set contains: MQ-5 Gas Sensor, Color Sensor, Flame Sensor, Hall Sensor, Infrared Reflective Sensor, Laser Sensor, Moisture Sensor, Rotation Sensor, Sound Sensor, Temperature-Humidity Sensor, Tilt Sensor, UV Sensor, Liquid Level Sensor. Modules compatible with Arduino
zł205.32
24h
Available quantity: 2
Available
No product available!
TSL25911FN light sensor module that can measure both visible and infrared light. It communicates via an I2C interface. Waveshare TSL25911 Light Sensor
zł18.29
24h
Available quantity: 2
Available
Other products in the same category (16)
With Maker Uno RP2040, we bring the power of the RP2040 chip into the familiar Uno form factor. We maintain the user-friendly nature and plug-and-play features that have contributed to the popularity of the Arduino platform, while utilizing the advanced capabilities of the RP2040 to enhance its performance. Additionally, this board has been enriched with Maker series features that support the learning process and spark creativity. Cytron MAKER-UNO-RP2040
zł63.90
24h
Available quantity: 2
Available
Board with Atmel ATmega328P microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface
zł27.97
3 weeks
No product available!
Microcontroller board based on the ATmega328P
zł35.58
24h
Available quantity: 20
Available
Virtual keyboard module in the form of a small flash drive. It allows you to simulate the keyboard after uploading the appropriate software and pressing a combination of buttons on the computer.
zł111.04
4 weeks
No product available!
Microcontroller board based on the ATmega328
zł33.05
24h
Available quantity: 10
Available
Small evaluation board based on the ATmega328, RoHS
zł59.52
24h
Available quantity: 5
Available
Board compatible with Arduino Nano. It is based on the ATmega328P microcontroller with 32 KB Flash, 2 KB SRAM and 1 KB EEPROM. It has 12 LEDs, a buzzer and a user button. Cytron Maker Nano
zł42.16
24h
Available quantity: 20
Available
Development board based on the R7FA4M1AB3CFM microcontroller and compatible with Arduino UNO R4 WiFi. It is equipped with ESP32-S3FN8 with a dual-core 32-bit Xtensa LX7 core and wireless communication in the 2.4GHz WiFi band and Bluetooth LE. Waveshare R7FA4 PLUS B
zł100.90
24h
Available quantity: 2
Available
Module with ATmega4808 microcontroller from AVR family (48 KB Flash, 6 KB SRAM, 256 B EEPROM). The module has 14 I / O lines, 6 PWM channels, 8 analog inputs.
zł47.64
4 weeks
No product available!
Board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface
zł53.71
24h
Available quantity: 16
Available
Board compatible with Arduino, based on ATmega328P. Equipped with an area with prototype holes, a breadboard, 12 LEDs, a button and a buzzer. Cytron MAKER-UNO-X
zł57.75
24h
Available quantity: 3
Available
Development board equipped with RP2040 microcontroller, RGB LED diodes, buzzer and Qwiic/STEMMA QT connectors. Pin spacing compatible with Arduino Nano. Cytron MAKER-NANO-RP2040
zł45.94
24h
Available quantity: 6
Available
A miniature development board with ATtiny85 microcontroller, on which 6 I / O pins were derived. The module is supported by Arduino IDE. modATT85
zł14.60
4 weeks
No product available!
Compact microcontroller board with an ATmega32U4 chip that integrates with USB to act as a HID device such as a keyboard or mouse. It operates at 5V at 16MHz, offering 20 digital I/O lines, of which 7 support PWM and 12 act as analog inputs.
zł53.85
24h
Available quantity: 11
Available
Module with ATmega328 microcontroller from the AVR family (32 kB Flash, 2 kB SRAM, 1 kB EEPROM). The module has 14 I/O lines, 6 PWM channels, 8 analog inputs
zł29.67
4 weeks
No product available!
Development board with ATmega328P microcontroller compatible with Arduino Uno Rev3. Waveshare R3 PLUS
zł86.21
24h
Available quantity: 2
Available
Development board based on the R7FA4M1AB3CFM microcontroller and compatible with Arduino UNO R4 Minima. Waveshare R7FA4 PLUS A