<border=0>Description
The Xbee shield allows an Arduino board to communicate wirelessly using Zigbee. It is based on the Xbee module. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). It can be used as a serial / usb for a wide range of applications. The shields breaks out the Xbee's pins to a through-hole solder pad. It provides female pin headers for digital pins that can be used on the board (digital pins 8 to 13).
The XBee shield was created in collaboration with Libelium , who developed it for use in Their SquidBee motes (used for creating sensor networks).
Code: A000021
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Dual-channel electric motors controller (H-bridge) Arduino Motor Shield Rev3 with L298 for controlling two DC motors or one stepper motor with the possibility of using an electronic brake.
No product available!
Beetle is a extremely the smallest Arduino leonardo board with Atmel AtMega32u4. 16MHz clock time and has expanded amounts of interfaces: 10 digital pins, 5 analog pins and 4 pwn pins. DFR0282
Educational platform designed to learn programming using the Arduino IDE. A series of guides has been prepared for the set. SparkFun DEV-12651
Expansion board with 4G/3G/2G communication module and GNSS positioning. The kit has pins compatible with Arduino and STM32 Nucleo. DFRobot TEL0124
Educational kit with the Arduino Uno Rev3 base board for learning the basics of programming and electronics. Arduino Education Starter Kit
No product available!
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5036
No product available!
A-Star 328P Micro is a small board based on ATmega 328PB microcontroller (Flash, 32 KB, SRAM, 2.5 KB, EEPROM, 1KB, 16 MHz). The system has a loaded bootloader compatible with Arduino. The board has 24 I / O ports (of which 9 pins can be used for PWM outputs and 8 pins for analog inputs). Supply voltage 5.5 ... 15 V. The board works with 5 volts logic voltage. Pololu 3160
Arduino compatible shield for the ESP8266 WiFi SoC – a leading platform for Internet of Things (IoT) or WiFi-related projects. WRL-13287
No product available!
This shield allows you to interface Wixel wireless modules to your Arduino (and other compatible products), enabling simple wireless programming, debugging, and control using standard Arduino software. Pololu 2513
Expansion board for three stepper motor drivers compatible with Arduino Nano. The stepper driver connectors fit A4988 modules
Module with ATmega328 microcontroller from the AVR family (32 kB Flash, 2 kB SRAM, 1 kB EEPROM). The module has 14 I/O lines, 6 PWM channels, 8 analog inputs
No product available!
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-W
No product available!
Ethernet network module with W5500 chip and PoE (Power over Ethernet) function. It communicates via the SPI interface, it has a built-in TCP/IP stack. DFRobot DFR0850
No product available!
This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. DEV-09716
Bluno - BLE with Arduino Uno
Shield - Xbee w / o RF module