Best sellers
There are 17510 products.
Liquid, rosin-free flux intended for high-temperature tinning and soldering of painted elements. 500 ml bottle. AG Termopasty ART.AGT-071
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-LCD-0.96-M
Module with a flame sensor or other light sources with a wavelength in the range of 760 to 1100 nm. It was based on the YG1006 sensor (photovolver NPN). The sensor has a connector compatible with the Grove standard. Seeed studio 101020049
DC-DC Step-Down Converter ME3116AM6G with an output voltage of 5 V, input voltage from 6 to 24 V and a maximum output current of 1 A. Dedicated to the M5Stack modules. M5Stack U125
IoT development board equipped with ESP32 chip with WiFi and Bluetooth, has a USB-UART interface allowing programming via the USB port of the computer. DFRobot DFR0625
Soldering acid intended for hard-to-solder nickel-plated surfaces. 500 ml bottle. AG Termopasty ART.AGT-272
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 4 GB LPDDR4 RAM and 16 GB eMMC. Raspberry Pi CM4004016
Compact ISP programmer for AVR microcontrollers. Works with Atmel Studio, AVRDUDE and Arduino IDE environments, using the STK500 protocol. Has a USB-TTL adapter function. Pololu 3172
Desktop Kit with Raspberry Pi 4 minicomputer model B 4 GB RAM. In addition to the Raspberry Pi minicomputer, the set includes: an official keyboard and mouse, 5.1 V (3 A power supply), an official case (white-raspberry), two official microHDMI cables, a 16 GB memory card with NOOBS software and a guide.
JTAG / SWD programmer-debugger with USB and WiFi interface. It supports microcontrollers and microprocessors with Cortex-M, Cortex-A, Cortex-R and ARM7, ARM9 and ARM11 cores of most manufacturers as well as 8051, RISC-V, PIC32, RX. Segger J-Link WiFi (8.14.28)
The touch sensor module (touch button) can be used as a replacement for traditional mechanical buttons. It operates based on the TTP223-B system, which measures the capacity of the metal field on the module. The module has a connector in accordance with the Grove standard. Seeed studio 101020037
The fluid is intended for soft soldering of galvanized sheets and pure zinc. 50 ml bottle. AG Termopasty ART.AGT-204
Camera module with Sony IMX219 image sensor with 8 MP resolution. It is compatible with Raspberry Pi. It supports MJPG and YUY2 data format. ArduCam B0196
Module with a 4-element 14-segment display. The board is equipped with a Qwiic connector and communicates via the I2C interface. SparkFun COM-16918
Module with a humidity sensor. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020018
Motor with 37 mm diameter and 65 mm length, 6,3:1 metal gear, 12 V operating voltage, 0,2 A to 5,5 A power consumption, 1600 RPM speed, 3 maximum torque and 64 CPR encoder. Pololu 4757
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 1 GB LPDDR4 RAM and 16 GB eMMC. Raspberry Pi CM4001016
TPL5110 external counter module to turn on a project after a set time and save energy. The TPL5110\'s delay is configurable with resistors ranging from 100 ms to two hours. SparkFun PRT-15353
Motor with 25 mm diameter and 67 mm length, 47:1 metal gear, 6 V operating voltage, 0,55 A to 6,5 A power consumption, 200 RPM speed, 8,5 maximum torque and 48 CPR encoder. Pololu 4805