Best sellers

Module with TMC2208 stepper motor driver. It enables control with a supply voltage ranging from 5.5 to 34 V and a current of up to 1,2 A

Limit switch without lever, 250VAC, 1A, SPDT, ON- (ON), RoHS

A tool dedicated to learning the basics of software defined radio (SDR) and radio communication (RF). It can generate or receive analog RF signals from 325 MHz to 3800 MHz. ADALM-PLUTO

Unshielded UTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCU6-10CC-0100-O

ARK terminal connector spring 5-pin, pitch 5.00 mm, non-detachable. Set of 5 pieces

An axial DC fan with dimensions of 40x40x10mm operates in the voltage range of 4.5-13.8V with a rotational speed of 7000 rpm. The device has a low noise level of 27.3dBA and is made of thermoplastic with an operating temperature range from -10 to 70°C.

Universal board for ZL40ARM and ZL41ARM kits

Krystyna Maria Noga, Marcin Radwański

Shielded FTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCF6-10CC-0500-G

Unshielded UTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCU6-10CC-0100-W

Power cord with a length of 50 cm with a male T-Dean plug and a DC Jack 5.5 x 2.5 mm plug. It allows you to connect a battery with an T-Dean socket to a device with a DC socket

Unshielded UTP category 5E Ethernet network cable with RJ45 plugs. Lanberg PCU5-10CC-0100-W

3-pin ARK mounting strip, 5.0 mm pitch. 306-5.0-03P-12-00A(H). Set of 10 pieces

AT24C02AM1, EEPROM memory, I2C 256x8bit 4,5÷5,5V, SO8

Development board D1 Mini Pro with WiFi ESP8266 module and 16 MB Flash memory, equipped with ceramic antenna and external antenna connector. The module can be programmed from the Arduino IDE level. WeMos D1 Mini Pro

The XT90 to XT60 adapter allows for direct connection of components with various power connector standards. It\'s ideal for robotic projects, modeling projects, and test systems where quick adaptation of the power source to a specific device without modifying the installation is essential

Module with a 3.5" TFT LCD display with a resolution of 480 x 320 pixels and a resistive touch panel. It can work with the main boards of Manta M4P/M5P/M8P 3D printers or the PI4B adapter. The SPI interface is used to operate the display, and the bus is used for the touch panel. I2C. The module was designed for 3D printers, but it will also be used in other projects. BIGTREETECH TFT35 SPI V2.1

15:1 Micro Metal Gearmotor. Pololu 4784

Lens with C-mount mount and 16 mm focal length. 10MPx resolution. Designed to work with the Raspberry Pi HQ camera. Raspberry Pi PT3611614M10MP

Din rail enclosure Z108 lightgray ABS V0