Best sellers
There are 16462 products.
Expansion board based on the Wiznet W5200 Ethernet system. It allows you to easily connect Arduino to an Ethernet network. DFRobot DFR0125
The Parallax Feedback 360 ° is a digital servo designed for continuous operation. Standard PWM modeling is used for control. The recommended operating voltage is 6 V, at this voltage the servomotor has a speed of 140 rpm and a torque of 2.5 kg * cm (0.25 Nm). In addition, the servo has a Hall sensor. Pololu 3432
Adapter with a set of connectors specific to the Raspberry Pi 3 Model B/B+. It allows you to adapt the minicomputer Raspberry Pi Zero and Zero 2 W to projects based on Pi 3 model B/B+. Waveshare Zero-to-Pi3-Adapter (B)
Evaluation Kit with Bluetooth 5.0 BT401. It is equipped with a microSD slot, microUSB connector and two audio outputs. DFRobot DFR0782
Development board with SAMD21 microcontroller (ARM Cortex® M0+), 22 I / O lines, 12 PWM, UART interfaces, I2C, SPI. The board is equipped with the UBLOX SARA-R410M-02B module enabling the implementation of communication in NB IoT networks. Arduino MKR NB 1500 ABX00019
Z106JFp ABS V0 - Din rail enclosure Z106 lightgray with transparent filter ABS V0
Adapter with RPi CM4 socket and CM3 SODIMM connector. It allows you to connect the Raspberry Pi Compute Module 4 minicomputer to the base boards dedicated to CM3 modules. Waveshare Zero-to-CM3-Adapter
The FS5106R is a standard-sized servo that has been built by FEETECH specifically for continuous rotation, making it an easy way to get your robot moving. It features two ball bearings on the output shaft for reduced friction, and it offers easy access to the rest-point adjustment potentiometer.
A set for building a 6-legged walking robot controlled by a mobile application. Totem TKR-LDB
The S9V11MACMA switching step-up/step-down regulator efficiently produces a finely adjustable output between 2.5 V and 9 V whether it is higher or lower than the input voltage, which can range from 3 V to 16 V. The regulator also has a precision-adjustable low-voltage cutoff with hysteresis that can be used to prevent battery over-discharge.
DC motor driver that allows you to control the movement of three drives using the I2C interface. Board with soldered connectors. Pololu 5033
Kit for building an intelligent JetBot robot based on Jetson Nano. It consists of an expansion module, camera with Sony IMX219 image sensor, motors, housing and a set of mounting screws. Waveshare JetBot 2GB AI Kit Acce
Module with a 10-channel ADC ADS1263 converter with a resolution of 32-bits designed to work with the minicomputer Raspberry Pi and Jetson Nano. Waveshare High-Precision AD HAT
Module with nRF52840 microcontroller with ARM Cortex M4F core and Bluetooth 5.0 communication. Waveshare Core52840
The S9V11F5 switching step-up/step-down regulator efficiently produces 5V from input voltages between 2V and 16V. Pololu 2836
IPS 7.9" LCD display with touch panel dedicated for Raspberry Pi. It is equipped with DSI interface for image display and I2C interface for touch screen. Resolution 400x1280 pixels. Waveshare 7.9inch DSI LCD
A set for building a smartwatch based on the micro: bit educational module. It consists of an expansion board and a strap
Temperature and humidity sensor SHT10 with a stainless probe. Provides high temperature and pressure resistance. DFRobot SEN0148
Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, Li-Pol battery charging system. Adafruit 3405