New products
New products New products
zł343.01
24h
Available
Available
Available
Available
Available
SIM7000G NB-IoT HAT with NB-IoT/Cat-M/EDGE/GPRS for Raspberry Pi - Waveshare 20681
ID: 587573
5906623426034
zł164.41
Tax included
zł133.67 tax excl.
Communication module with the system SIM7000G designed for minicomputers Raspberry Pi. Adds NB-IoT, eMTC, EDGE, GPRS and GNSS support. Waveshare SIM7000G NB-IoT HAT (EN)
Description
SIM7000G NB-IoT HAT is a module that extends the capabilities of the Raspberry Pi with communication via GSM / GPRS, NB-IoT cellular networks and GNSS positioning within the GPS, BeiDou and GLONASS systems. The applied SIM7000EG chip by Simcompa allows you to make and receive calls, send and receive SMS messages and use wireless Internet. The module is controlled by AT commands through the UART interface (by default 9600 b/s).
NB-IoT HAT has many communication functions: NB-IoT, CAT-M, EDGE, GPRS and GNSS. NB-IoT (NarrowBand-Internet of Things) is a growing IoT communication technology evolving from LTE (4G), the advantages of which are low power, low cost, wide coverage. They are suitable for applications such as smart devices, remote control, tracking, remote monitoring, e-health, mobile POS terminals, and bike sharing. GSM / GPRS and EDGE are traditional 2G/2.5G technologies that allow you to send SMS or make other wireless connections.
The module connects to the minicomputer using a standard 40-pin connector. The product Wiki page offers extensive support in the form of libraries for Raspberry Pi, Arduino and STM32 .
Features
- Standard Raspberry Pi 40-pin GPIO connector
- Supports TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail etc.
- Supports GNSS positioning (GPS, BeiDou, GLONASS)
- Built-in USB interface to test AT commands, get GPS positioning data
- UART control pins, for connection to host boards such as Arduino/STM32
- The built-in voltage level converter, 3.3 V by default, allows switching to 5 V through a 0 Ω resistor
- SIM card slot, compatible with both a normal SIM card and a dedicated NB-IoT card
- 2 x LED indicators
- Baud Rate: 300bps ~ 3686400bps (default 115200bps)
- Control by AT commands (3GPP TS 27.007, 27.005 and enhanced AT commands SIMCOM)
- Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 98, USAT
- Power supply: 5V
- Working voltage: 5V/3.3V (default 3.3V)
- Standby current: 1.2 mA
- Energy saving mode: 9uA
- Working temperature: -40 to 85°C
- Dimensions: 30.2 x 65 mm
Kit contains
- SIM7000G NB-IoT HAT
- GSM antenna
- External GPS antenna (B)
- MicroUSB cable - USB A
- A set of screws
587573
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Advanced expansion shield for Arduino. Supports SIM cards as well as NB-IoT / CAT-M cards. With the integrated GNSS (Global Navigation Satellite System) module, it supports GPS, GLONASS, Galileo and BeiDou navigation systems. The module is powered with a voltage from 7 V to 12 V. DFRobot DFR0572
zł216.11
24h
Available quantity: 2
Available
SIM7000E NB-IoT HAT is a module that extends the capabilities of Raspberry Pi for communication via GSM / GPRS cellular networks based on Simcom Sim7000E. It has support for NB-IoT, eMTC, EDGE, GPRS and GNSS. Waveshare SIM7000E NB-IoT HAT
Regular pricezł226.78zł155.90
24h
Available quantity: 9
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 (4 x Cortex-A72) running at 1.8 GHz, 3 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł499.00
24h
Available quantity: 173
Available
Board with the NB-IoT SIM7020E module designed for the Raspberry Pi Pico. It communicates via the UART interface and AT commands. Waveshare Pico-SIM7020E-NB-IoT
zł76.27
Delivery date unknown
No product available!
Other products in the same category (16)
A module that combines GSM/GPRS/GNSS and BT 3.0 technologies. It is available in a small, easy to solder LCC housing and has a low power consumption up to 1.2 mA. Quectel MC60CA
zł107.21
24h
Available quantity: 13
Available
SIM800L module with support for four-band GSM/GPRS network. Has a MicroSD card slot. Module controlled by AT commands.
zł19.96
24h
Available quantity: 22
Available
SIM800L V2.0 module with support for four-band GSM/GPRS network. Module controlled by AT commands.
zł34.58
24h
Available quantity: 183
Available
Wio development kit equipped with LTE 4G communication and a GNSS satellite navigation module. Seeed Studio 102991022
zł588.46
24h
Available quantity: 1
Available
4G/3G/2G communication and GNSS positioning module. It allows you to make phone calls, support SMS, MMS, e-mail, TCP, UDP, DTMF, HTTP, FTP and has support for GPS, BeiDou, Glonass, LBS. Waveshare SIM7600G-H 4G for Jetson Nano
zł342.91
24h
Available quantity: 4
Available
Expansion board with LTE Cat-1, 2G GSM/GPRS and LBS module, designed to work with Raspberry Pi minicomputers. Waveshare A7670E Cat-1 HAT
zł134.00
4 weeks
No product available!
5G/4G/3G and GNSS module with SIM8200EA-M2 chip. It allows you to make phone calls, SMS support, cloud communication and has support for GPS, Galileo, BeiDou, Glonass and QZSS. Waveshare SIM8200EA-M2 5G for Jetson Nano (EU)
zł1,795.09
4 weeks
No product available!
5G/4G/3G and GNSS module with SIM8202G-M2 chip. It allows you to make phone calls, SMS support, cloud communication and has support for GPS, Galileo, BeiDou, Glonass and QZSS. Waveshare SIM8202G-M2 5G for Jetson Nano (EU)
zł1,487.92
4 weeks
No product available!
Communication module with the system SIM7000G designed for minicomputers Raspberry Pi. Adds NB-IoT, eMTC, EDGE, GPRS and GNSS support. Waveshare SIM7000G NB-IoT HAT (EN)
zł164.41
4 weeks
No product available!
Cat 4 LTE module that supports LTE-TDD, LTE-FDD, HSPA +, GSM, GPRS and EDGE wireless communication. It is equipped with a Mini-PCIe interface. Waveshare SIM7600G-H-PCIE
zł283.83
24h
Available quantity: 4
Available
Module with SIM868 designed for GSM, GPRS communication and GNSS positioning. It can communicate within the Bluetooth 3.0 standard. SB Components 21895
zł247.80
24h
Available quantity: 1
Available
Set with the SIMCom 4G module SIM7600G-H designed to work with the Raspberry Pi minicomputer. It supports 4G, 3G, 2G networks and GNSS positioning. Waveshare SIM7600G-H-M2 4G HAT
zł376.01
4 weeks
No product available!
Set with SIMCom 5G SIM8202G-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (B)
zł1,275.58
24h
Available quantity: 14
Available
The Arduino expansion board is dedicated to applications that use NB-IoT communication. Thanks to the GNSS (Global Navigation Satellite System) module, it supports GPS, GLONASS, Galileo, QZSS and BeiDou navigation systems. The module is supplied with the voltage from 7 to 12 V. DFRobot DFR0572
zł260.44
24h
Available quantity: 1
Available
Communication module with the SIM800C system designed for Raspberry Pi minicomputers. Adds support for GSM/GPRS networks. Waveshare SIM800C GSM/GPRS HAT
zł86.47
24h
Available quantity: 1
Available
The set with the RM500Q-GL module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM500Q-GL 5G HAT (with case) (EU)
zł1,861.14
4 weeks
No product available!
Communication module with the system SIM7000G designed for minicomputers Raspberry Pi. Adds NB-IoT, eMTC, EDGE, GPRS and GNSS support. Waveshare SIM7000G NB-IoT HAT (EN)