Communication module with R800C chip designed for Raspberry Pi minicomputers. It allows you to add support for 2G GSM/GPRS networks to your project. It supports SMS, GPRS, TCP/IP, DTMF, HTTP, FTPI and phone call communication. The HAT module communicates via the UART interface (via AT commands), so it can also work with other development boards. In addition, a built-in 3.3V/5V voltage level converter adds to the flexibility. The module's operating status is indicated by two LED indicators. It will find application in projects requiring cellular network communications. Full documentation is available on the product page.

| 1. Moduł R800C | 8. Złącze audio Jack 3,5 mm |
| 2. Stabilizator 3,3 V | 9. Złącze goldpin R800C |
| 3. Układ zasilania MIC29302 | 10. Złącze anteny GSM |
| 4. Konwerter poziomów napięć 3,3V/5V | 11. Gniazdo karty SIM |
| 5. Złącze GPIO 40-pin | 12. Przełącznik zasilania R800C |
| 6. Zworka wyboru napięcia | 13. Wskaźnik połączenia GSM |
| 7. Zworka zasilania | 14. Wskaźnik zasilania |
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
No product available!
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 (4 x Cortex-A72) running at 1.8 GHz, 3 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
4G/3G/2G communication module and GNSS positioning. It allows making phone calls, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP support and GPS, BeiDou, Glonass, LBS support. Waveshare SIM7600G-H 4G HAT
A module that combines GSM/GPRS/GNSS and BT 3.0 technologies. It is available in a small, easy to solder LCC housing and has a low power consumption up to 1.2 mA. Quectel MC60CA
SIM800L module with support for four-band GSM/GPRS network. Has a MicroSD card slot. Module controlled by AT commands.
SIM800L V2.0 module with support for four-band GSM/GPRS network. Module controlled by AT commands.
No product available!
Wio development kit equipped with LTE 4G communication and a GNSS satellite navigation module. Seeed Studio 102991022
4G/3G/2G communication and GNSS positioning module. It allows you to make phone calls, support SMS, MMS, e-mail, TCP, UDP, DTMF, HTTP, FTP and has support for GPS, BeiDou, Glonass, LBS. Waveshare SIM7600G-H 4G for Jetson Nano
Expansion board with LTE Cat-1, 2G GSM/GPRS and LBS module, designed to work with Raspberry Pi minicomputers. Waveshare A7670E Cat-1 HAT
No product available!
5G/4G/3G and GNSS module with SIM8200EA-M2 chip. It allows you to make phone calls, SMS support, cloud communication and has support for GPS, Galileo, BeiDou, Glonass and QZSS. Waveshare SIM8200EA-M2 5G for Jetson Nano (EU)
No product available!
5G/4G/3G and GNSS module with SIM8202G-M2 chip. It allows you to make phone calls, SMS support, cloud communication and has support for GPS, Galileo, BeiDou, Glonass and QZSS. Waveshare SIM8202G-M2 5G for Jetson Nano (EU)
No product available!
Communication module with the system SIM7000G designed for minicomputers Raspberry Pi. Adds NB-IoT, eMTC, EDGE, GPRS and GNSS support. Waveshare SIM7000G NB-IoT HAT (EN)
No product available!
Cat 4 LTE module that supports LTE-TDD, LTE-FDD, HSPA +, GSM, GPRS and EDGE wireless communication. It is equipped with a Mini-PCIe interface. Waveshare SIM7600G-H-PCIE
Module with SIM868 designed for GSM, GPRS communication and GNSS positioning. It can communicate within the Bluetooth 3.0 standard. SB Components 21895
Set with the SIMCom 4G module SIM7600G-H designed to work with the Raspberry Pi minicomputer. It supports 4G, 3G, 2G networks and GNSS positioning. Waveshare SIM7600G-H-M2 4G HAT
Set with SIMCom 5G SIM8202G-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (B)
The Arduino expansion board is dedicated to applications that use NB-IoT communication. Thanks to the GNSS (Global Navigation Satellite System) module, it supports GPS, GLONASS, Galileo, QZSS and BeiDou navigation systems. The module is supplied with the voltage from 7 to 12 V. DFRobot DFR0572
Communication module with the SIM800C system designed for Raspberry Pi minicomputers. Adds support for GSM/GPRS networks. Waveshare SIM800C GSM/GPRS HAT
Communication module with R800C chip designed for Raspberry Pi minicomputers. It adds support for GSM/GPRS (2G) networks. Waveshare SIM800C GSM/GPRS HAT