Dual MAX14870 Motor Driver - dual motor controller for Raspberry Pi (soldered connectors)
ID: 570685
5906623478606
€31.21
Tax included
€25.37 tax excl.
Dual MAX14870 Motor Driver is a dual DC driver compatible with Raspberry Pi that allows you to control two DC motors with 4.5-36V continuous current of 1.7A. Pololu 3759
Description
Dual MAX14870 Motor Driver is a compact dual driver DC motors compatible with Raspberry Pi and plugged directly into the GPIO pins of the minicomputer. It allows you to control two DC motors with a voltage in the range of 4.5-36 V. The controller is based on two H MAX14870 bridges, thanks to which 1.7 A (2.5 A in peak) current can be drawn from each channel. The board has protection against reverse power connection. It is possible to power the Arduino board from a common power source with motors through an additional converter (not included).
The module was designed for new Raspberry Pi minicomputers in versions with a 40-pin connector: Model B + , Model A + , Raspberry Pi 2 Model B and Raspberry Pi 3 Model B.
Attention!
The Raspberry Pi computer seen in the pictures is not included in the set, it must be purchased separately.
properties
- Dual DC motor driver compatible with Raspberry Pi
- Supply voltage of 4.5-36V motors
- Maximum current at continuous operation 1.7 A (2.5 A at peak)
- PWM signal frequency up to 50 kHz
- Possibility of powering Raspberry Pi from the same source as motors using an additional converter (eg D24V10F5 or D24V22F5 )
- Python library compatible with the driver
- Protection against back voltage
- Error output overload or over temperature limit
- Dimensions: 43.2 x 20.3 x 11.6 mm
- Weight: 4.8 g
Included
- Assembled Pololu Dual MAX14870 Motor Driver extension for Raspberry Pi
570685
Data sheet
- Compatible with
- Raspberry Pi 5/4/3/2/1 A/B, Zero/Zero 2 H/WH
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
- Available
Raspberry Pi 3 model B (Quad Core Broadcom BCM2837, 4x1.2GHz ARM Cortex-A53, RAM 1GB, 4xUSB, Ethernet, HDMI, Wifi, Bluetooth)
€43.14 24hAvailable quantity: 1 AvailableThis small synchronous switching step-down (or buck) regulator takes an input voltage of up to 36V and efficiently reduces it to 5V. The board measures only 0.7″ × 0.7″ yet delivers a typical continuous output current of up to 2.5A and features reverse voltage protection. Pololu 2858
€12.27 24hAvailable quantity: 3 AvailableThe RASPBERRYPI-2-MODB-1GB is a second generation Raspberry Pi
€52.78 Delivery date unknown No product available!
The Raspberry Pi 3 Model B+ is boasting a 64-bit quad core processor BCM2837B0 running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT
€42.80 24hAvailable quantity: 26 Available
Other products in the same category (16)
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5048
€76.72 6 weeks No product available!
DC motor driver that allows you to control the movement of three drives using the I2C interface. Board with soldered connectors. Pololu 5033
€50.48 24hAvailable quantity: 1 AvailableThe core of a small robot, either as an auxiliary controller atop a Raspberry Pi base or as a complete control solution on its own. Its Atmel ATmega32U4 microcontroller comes preloaded with an Arduino-compatible bootloader. This version does not include any through-hole components or connectors, allowing for customized assembly or standalone use. Pololu 3118
€37.15 24hAvailable quantity: 2 AvailablePololu Dual G2 High-Power Motor Driver 24v18 is an extension that allows you to control two DC motors designed for Raspberry Pi. The motors can be supplied with 6.5-36V voltage and can draw a maximum current of 18A. Pololu 3756
€170.27 6 weeks No product available!
Pololu Dual G2 High-Power Motor Driver 18v22 is an extension that allows you to control two DC motors designed for Raspberry Pi. The motors can be powered with 6.5-30V and draw up a maximum current of 22A. Pololu 3754
€132.78 6 weeks No product available!
HAT module with a driver for two DC motors designed for Raspberry Pi. Motors can be powered with the voltage from 6.5 to 30 V and draw a maximum current of up to 18 A. Pololu 3751
€74.75 6 weeks No product available!
The PCA9685 servo driver module is dedicated to Raspberry Pi minicomputers. It allows you to control 16 PWM channels. SB Components 08957
€20.35 24hAvailable quantity: 1 AvailableHAT module with TB6612FNG motor driver and PCA9685 PWM driver designed for Raspberry Pi minicomputers. The board is equipped with a 40-pin connector. Adafruit 4280
€32.06 24hAvailable quantity: 1 AvailableAdafruit 16-Channel PWM / Servo HAT for Raspberry Pi - Mini Kit (Adafruit 2327)
€24.87 24hAvailable quantity: 3 AvailableDC motor controller that allows the movement of three drives to be controlled via an I2C interface. Pololu 5073
€22.94 24hAvailable quantity: 2 AvailableDFRobot 0592 is a Raspberry Pi DC motor driver board with built-in encoder interface that can drive a 2-way DC motor and a DC motor with encoder
€17.16 24hAvailable quantity: 1 AvailableThis add-on board makes it easy to control two high-power DC motors with a Raspberry Pi. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 36 Voperating range and are efficient enough to deliver a continuous 14 A without a heat sink. The drivers offer basic current limiting functionality, and they accept ultrasonic PWM frequencies for quieter operation.
€65.70 24hAvailable quantity: 2 AvailableDual DC motor controller designed for Raspberry Pi, which enables the engine to be supplied with voltage in the 4.5-28V range and power consumption in continuous operation of 2.6A (5A in peak) of two DC motors. Pololu 2762
€40.57 24hAvailable quantity: 1 AvailableDC motor driver that allows you to control the movement of two drives using the I2C interface. Board with connectors for assembly. Pololu 5058
€161.08 6 weeks No product available!
This programmable module combines with a Raspberry Pi to serve as the control center of a small robot or electronics project. Its Atmel ATmega32U4 microcontroller comes preloaded with an Arduino-compatible bootloader, and the board includes dual motor drivers that can deliver 1.8 A per channel to two brushed DC motors.
€38.54 24hAvailable quantity: 3 AvailableThis add-on board enables a Raspberry Pi B+, Pi A+, Pi 2 or Pi 3 to drive a pair of brushed DC motors. Its dual MC33926 motor drivers operate from 5 V to 28 V and can deliver a continuous 3 A (5 A peak) per motor. The default pin mappings make it easy to get started using our provided software, but the board also exposes most of the driver chips’ I/O pins for more specialized applications.
€65.85 24hAvailable quantity: 1 Available
Dual MAX14870 Motor Driver is a dual DC driver compatible with Raspberry Pi that allows you to control two DC motors with 4.5-36V continuous current of 1.7A. Pololu 3759