- Out-of-Stock
7.5" (C) Tri-Color E-Ink e-Paper Display 640x384 - Waveshare 14144
ID: 573320
3-color e-Paper display with a diagonal of 7.5 "and a resolution of 640x384 px. SPI interface. No PCB. Waveshare 7.5inch e-Paper (C)
Description
3-color e-Paper display with a diagonal of 7.5" and a resolution of 640x384 px. It has the ability to display content with a two-level gray scale, and the built-in controller communicates via the SPI interface. E-Paper displays are characterized by high contrast of the displayed image and consume electricity only when the displayed content is changed It is compatible with 3.3V systems. Support is available on the product page in the form of examples of use with Raspberry Pi, Jetson Nano, Arduino and STM32.
Features
- Diagonal: 7.5"
- Resolution: 640x384 px
- Display color: yellow, black, white
- Gray levels: 2
- Interface: 3-wire SPI, 4-wire SPI
- Pixel size: 0.255 x 0.255
- Full refresh time: 16 seconds
- Power consumption: 38 mW
- Viewing angle:> 170 °
- No backlight, display the last content after power off
- Low energy consumption
- Working voltage: 3.3V
- Display size: 163.2 x 97.92 mm
- Outline dimension: 170.2 x 111.2 x 1.18 mm
573320
Data sheet
- Screen type
- E-Ink/Epaper
- Diagonal (inch)
- 7,5
- Resolution
- 640 x 384 px
- Interface
- SPI
- Touch
- No
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Driver for EPAPIER displays in the form of a HAT overlay for Raspberry Pi computers. The SPI interface is used for communication with the controller. Waveshare e-Paper Driver HAT
zł36.37
24h
Available quantity: 3
Available
3-color e-Paper display with a diagonal of 5.83" and a resolution of 600x448 px. SPI interface. Without PCB. Waveshare 5.83inch e-Paper (C)
zł268.52
Delivery date unknown
No product available!
Module with e-Paper display, diagonal 7.5" and resolution 800×480px. Communication via SPI. Waveshare 7.5inch e-Paper HAT
zł254.65
Delivery date unknown
No product available!
Black and white e-Paper display with a diagonal of 7.5" and a resolution of 800x480 px. SPI interface. No PCB. Waveshare 7.5inch e-Paper
zł216.01
Delivery date unknown
No product available!
Other products in the same category (16)
No product available!
No product available!
No product available!
AVT kit for self-assembly of a work time counter triggered by current flow. AVT5548 B
Retired
No product available!
No product available!
The Pololu MinIMU-9 v3 is an inertial measurement unit (IMU) that packs an L3GD20H 3-axis gyro and an LSM303D 3-axis accelerometer and 3-axis magnetometer onto a tiny 0.8″ × 0.5″ board. Pololu 2468
Retired
No product available!
No product available!
Module of the 8-channel I2C expander based on the TCA9548A system. It enables communication with many I2C devices that have the same address. Pimoroni 8086-006
Retired
No product available!
No product available!
ROSA3D filament made of high-quality PET-G granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G Standard Army Green
Retired
No product available!
Printed circuit board and programmed circuit for universal timer 0 to 99min. AVT3200 A +
Retired
No product available!
No product available!
Imagine the future of space exploration with Ugears\' Manned Mars Rover, an all-terrain planetary explorer with 6x6 all-wheel drive, a cab for two astronauts, spring-driven motor, a swivel between cab and body, and fully-sprung independent suspension. This DIY model space rover has its front centerline pushed forward for better climbing and stability, front wheels that turn for maneuverability, and large diameter wheels to overcome obstacles while navigating the Martian landscape. A ramp folds down in the back, while a top-mounted dish antenna rotates 360° and can swivel up and down to transmit or receive signals to and from the base. UGears 70206
Retired
No product available!
We know you love car modelling and you love the Ugears Dream Cabriolet, Roadster, and U-9 Grand Prix. Well, make room on the shelf, because a powerful new mechanical model just muscled its way into the Ugears Automotive collection. Introducing the Drift Cobra Racing Car, a beautifully-styled, two-seat convertible—our twist on what may be the most revered sports car of all time: the Shelby Cobra 427. The Cobra 427, produced between 1965-67, had a 7.0 litre 450-510 horsepower engine, did 0-60 mph in just over 4 seconds, and had a top speed of 185 mph. UGears 70161
Retired
No product available!
Jerzy Cytowski, Jerzy Gielecki, Artur Gola
Delivery date unknown
No product available!
No product available!
3-color e-Paper display with a diagonal of 7.5 "and a resolution of 640x384 px. SPI interface. No PCB. Waveshare 7.5inch e-Paper (C)