![I2C to Dual UART Module - I2C - 2x UART converter](https://kamami.pl/85961-large_default/i2c-to-dual-uart-module-i2c-2x-uart-converter-dfr0627.jpg)
![I2C to Dual UART Module - I2C - 2x UART converter](https://kamami.pl/85961-large_default/i2c-to-dual-uart-module-i2c-2x-uart-converter-dfr0627.jpg)
zł31.53 tax excl.
I2C-UART converter module with two UART output interfaces. Configuration of I2C addresses allows you to connect up to 4 such modules to one controller, which means extending the board's capabilities by 8 UART interfaces. DFRobot DFR0627
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
I2C-UART converter module with two UART output interfaces. Each UART has an independent 256-byte FIFO hardware buffer for sending and receiving. The module provides a maximum communication speed of 2 Mb/s. Configuration of I2C addresses allows you to connect up to 4 such modules to one controller, which means extending the board's capabilities by 8 UART interfaces. The module is compatible with Arduino, Raspberry Pi, micro:bit.
A detailed description of the module and examples of use are available on the product Wiki page.
Cables for evaluation boards, set of 10 pcs., blue colour
Cables for evaluation boards, set of 10 pcs., red colour
Cables for evaluation boards, set of 10 pcs., green colour
Cables for evaluation boards, set of 10 pcs., yellow colour
Cables for evaluation boards, set of 10 pcs., white colour
A set of 10 pieces of female-female connecting cables with a length of 21 cm. CAB_F-F (BK-10-25)
A set of 10 female-female connection cables, in various colors, 17 cm long. CAB_F-F (Rainbow-10-17)
A small USB-UART TTL converter module based on the CH340E chip with a microUSB connector
DC-DC Step-Down converter module. It has an input voltage from 9 to 45 V, an output voltage of 9 V and a maximum output current of up to 2.9 A. Pololu 4895
Step-Up/Step-Down converter with adjustable output voltage from 0.8 to 33 V, input voltage from 4.5 to 30 V and a maximum current of 5 A. It is equipped with a voltmeter with a display
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 40 V and efficiently reduces it to 3.3 V with an available output current of around 15 A. Pololu 2880
No product available!
Step-Down converter D36V28F9 with an output voltage of 9 V, an input voltage from 9.8 to 50 V and a maximum output current of 3.4 A. Pololu 3785
Module with a 16-channel GPIO expander with the ability to control LEDs. It communicates via the I2C interface. Waveshare AW9523B IO Expansion Board
This small breakout board couples an Electret microphone (100Hz–10kHz) with a 60x mic preamplifier to amplify the sounds of voice, claps, door knocks or any sounds loud enough to be picked up by a microcontroller’s analog-to-digital converter. Each breakout comes fully assembled and works from 2.7V up to 5.5V. BOB-12758
UART-RS485 converter module, based on a halfduplex SP3485 transceiver. SparkFun BOB-10124
No product available!
The module contains a 5 V relay with a maximum current of 10 A (250 VAC) and optoisolated inputs, and with jumpers it is possible to select high or low switching. The module is equipped with screw connectors
No product available!
CS-mount lens and 6 mm focal length. 3MPx resolution. Designed to work with the Raspberry Pi HQ camera. Raspberry Pi PT361060M3MP12
Module with INA219 system with bi-directional current meter
No product available!
No product available!
Ultrasonic distance sensor MB1000 with a range from 0 to 645 cm. It has an output in the form of a serial interface, an analog signal or generates an impulse whose duration is proportional to the measured distance. Pololu 723
No product available!
The UM7-LT orientation sensor from Redshift Labs is an Attitude and Heading Reference System (AHRS) that contains a three-axis accelerometer, rate gyro, and magnetometer. It combines this data using an Extended Kalman Filter to produce attitude and heading estimates. This LT version of the UM7 does not have an enclosure.
I2C-UART converter module with two UART output interfaces. Configuration of I2C addresses allows you to connect up to 4 such modules to one controller, which means extending the board's capabilities by 8 UART interfaces. DFRobot DFR0627