STEMMA QT I2C Quad Rotary Encoder - Module for 4 incremental encoders with NeoPixel LEDs
ID: 1186221
5906623431823
€10.26
Tax included
€8.34 tax excl.
Module designed to operate four incremental encoders. It reads the encoder rotation and transmits the information via the I2C interface. Adafruit 5752
Description
Module with ATtiny817 microcontroller designed to operate incremental encoders. It reads signals from the rotary encoder and sends them to the connected master module via the I2C interface. It allows you to add four encoders to your project easily and quickly. The module does not have an encoder soldered on (not included), so the user can choose the corresponding component himself according to the pin layout used (PEC11). In addition, there are NeoPixel LEDs on the board, which can be controlled via the I2C bus and used, for example, as feedback of the rotation angle. The module is powered by 3.3 V to 5 V and communication is via a STEMMA QT connector or a 2.54 mm goldpin connector. The I2C address can be modified using 3 jumpers, allowing up to 8 modules to be connected on a single bus. Full documentation is available on the product page.
Features
- ATtiny817 microcontroller
- Works with encoders with PEC11 pin layout
- 4 NeoPixel LEDs controlled via I2C
- I2C interface
- Jumper to modify the I2C address (default 0x49)
- Interrupt output
- Built-in 3.3V/5V voltage level converter
- STEMMA QT connector compatible with Qwiic
- Python/CircuitPython and Arduino libraries
- Power supply: 3.3 to 5V
- Dimensions: 21.6 x 76.2 mm
Kit contains
- STEMMA QT I2C Quad Rotary Encoder module
- Male 16-pin goldpin connector
1186221
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The module is designed to support incremental encoders. It reads the rotation of the encoder and transmits the information via the I2C interface. Adafruit 4991
€8.76 24hAvailable quantity: 4 Available
Other products in the same category (16)
- Available
The EN11-VNB1BQ15 incremental encoder is a precise component for detecting the angle of rotation, with a quadrature output with a resolution of 20 pulses per revolution, ideal for position and speed control. Thanks to THT mounting, 5V power supply and low current consumption, it will be perfect for automation and robotics systems.
€1.43 24hAvailable quantity: 57 AvailableModule with Grove connector equipped with AS5600 magnetic encoder with a resolution of 12-bit. It allows for non-contact measurement of the angle of rotation. The module has an analog/PWM output and an I2C interface. Seeed Studio 101020692
€7.35 24hAvailable quantity: 3 AvailableModule with an incremental encoder with a rotation range of 360° and a button. Communicates via a digital interface
€2.58 24hAvailable quantity: 8 AvailableDigital rotary encoder with green and red LED backlight. It has unlimited rotation and generates a digital signal in the form of a Gray code. SparkFun COM-15140
€8.86 3 weeks No product available!
Module with an incremental encoder with a rotation range of 360° and a button. Communicates via a digital interface. DFRobot SEN0235
€3.33 24hAvailable quantity: 4 Available360° encoder module with LED indicators. It communicates via the I2C interface (Gravity connector). DFRobot SEN0502
€12.04 4 weeks No product available!
Module with encoder and RGB backlight. It has an unlimited range of motion and is perfect for e.g. lighting control. Pimoroni PIM522
€15.54 4 weeks No product available!
The module is designed to support incremental encoders. It reads the rotation of the encoder and transmits the information via the I2C interface. Adafruit 4991
€8.76 24hAvailable quantity: 4 AvailableDFRobot SEN0230 is an industrial rotary encoder based on photoelectric technology, generating 400 pulses per revolution in each phase, which in quadrature gives 1600 pulses. The robust aluminum and steel construction, with a maximum rotation speed of 5000 rpm, makes it ideal for precise measurements in automation and motion control systems.
€29.43 24hAvailable quantity: 9 AvailableAbsolute encoder module with 8421 (BCD) coding with 16 positions. Horizontal mounting. DFRobot DFR0722
€5.36 24hAvailable quantity: 3 AvailableThe module is equipped with an AS5600 magnetic encoder with a resolution of 12-bit. It allows for non-contact measurement of the angle of rotation. The module has an analog/PWM output and an I2C interface.
€2.50 6 weeks No product available!
Module with a mechanical encoder and RGB backlight in the form of 24 colorful LEDs. It offers five buttons and a rotary encoder. For communication, it uses a Qwiic/Stemma QT connector or a connector compatible with the Breakout Garden system. It is perfect, for example, for controlling lighting. Pimoroni PIM673
€34.47 24hAvailable quantity: 1 AvailableThe module is designed to support incremental encoders. It reads the rotation of the encoder and transmits the information via the I2C interface. It has two built-in STEMMA QT connectors. Adafruit 5740
€6.80 24hAvailable quantity: 2 AvailableThe EC11 is a precision rotary encoder with a pushbutton, generating 20 pulses per revolution, ideal for controlling user interfaces such as volume control or menu selection. With its compact design and easy mounting, it is suitable for a variety of DIY projects and automation applications.
€0.70 6 weeks No product available!
Gravity: 360 Degree Hall Angle Sensor is a rotation angle sensor measuring a value in the range of 0-360 ° with an analogue output, powered by 5V. DFRobot SEN0221
€75.87 24hAvailable quantity: 1 Available
Module designed to operate four incremental encoders. It reads the encoder rotation and transmits the information via the I2C interface. Adafruit 5752