Fermion: 8421 Encoder - module with absolute encoder (horizontal)

A compact digital rotary encoder module designed for simple and intuitive volume control in arcade and DIY projects. Ready to use without soldering, simply connect it to the "Encoder" port on the Picade Max USB Audio board. In addition to volume control, the encoder offers a mute function when the knob is pressed. Pimoroni PIM770

The EN11-VNB1BQ15 incremental encoder is a precise component for detecting the angle of rotation, with a quadrature output with a resolution of 20 pulses per revolution, ideal for position and speed control. Thanks to THT mounting, 5V power supply and low current consumption, it will be perfect for automation and robotics systems.

Module with an incremental encoder with a rotation range of 360° and a button. Communicates via a digital interface

The module is designed to support incremental encoders. It reads the rotation of the encoder and transmits the information via the I2C interface. Adafruit 4991

Incremental encoder (horizontal) with a resolution of 15 pulses per revolution. Equipped with a switch

Digital rotary encoder with green and red LED backlight. It has unlimited rotation and generates a digital signal in the form of a Gray code. SparkFun COM-15140

Module designed to operate four incremental encoders. It reads the encoder rotation and transmits the information via the I2C interface. Adafruit 5752

This set of two quadrature encoders for 20D extended-shaft motors provides precise rotational speed monitoring with 20 pulses per motor revolution. The devices utilize magnetic disc and Hall-effect sensors operating from 2.7-18V, and the digital outputs can be connected directly to a microcontroller. The encoders mount directly to the back of the motor, and the compact design and 6-pin JST PH connectors facilitate integration into robotic projects and control systems. Pololu 5661

The module is equipped with an AS5600 magnetic encoder with a resolution of 12-bit. It allows for non-contact measurement of the angle of rotation. The module has an analog/PWM output and an I2C interface.

The EC11 is a precision rotary encoder with a pushbutton, generating 20 pulses per revolution, ideal for controlling user interfaces such as volume control or menu selection. With its compact design and easy mounting, it is suitable for a variety of DIY projects and automation applications.

The module is designed to support incremental encoders. It reads the rotation of the encoder and transmits the information via the I2C interface. It has two built-in STEMMA QT connectors. Adafruit 5740

This set of two quadrature encoders for 20D extended-shaft motors provides precise rotational speed monitoring with 20 pulses per revolution of the motor shaft. The devices utilize a magnetic disc and Hall-effect sensors operating from 2.7-18V, and the digital outputs can be connected directly to a microcontroller. The encoders mount directly to the back of the motor, and the compact design and 6-pin JST PH connectors facilitate integration into robotic projects and control systems. Pololu 5660

Module with an incremental encoder with a rotation range of 360° and a button. Communicates via a digital interface. DFRobot SEN0235

Crowtail – Encoder 2.0 is a digital rotary encoder with 20 pulses per revolution and a dual-channel output for measuring angle and rotation direction. Used in control projects, interfaces, and axial motion detection systems.

Gravity: 360 Degree Hall Angle Sensor is a rotation angle sensor measuring a value in the range of 0-360 ° with an analogue output, powered by 5V. DFRobot SEN0221

360° encoder module with LED indicators. It communicates via the I2C interface (Gravity connector). DFRobot SEN0502