Incremental horizontal encoder with switch

Gravity: 360 Degree Hall Angle Sensor is a rotation angle sensor measuring a value in the range of 0-360 ° with an analogue output, powered by 5V. DFRobot SEN0221

Rotation Sensor

Absolute encoder module with 8421 (BCD) coding with 16 positions. Vertical mounting. DFRobot DFR0721

The module is equipped with an AS5600 magnetic encoder with a resolution of 12-bit. It allows for non-contact measurement of the angle of rotation. The module has an analog/PWM output and an I2C interface.

Digital rotary encoder with green and red LED backlight. It has unlimited rotation and generates a digital signal in the form of a Gray code. SparkFun COM-15140

Module designed to operate four incremental encoders. It reads the encoder rotation and transmits the information via the I2C interface. Adafruit 5752

DFRobot SEN0230 is an industrial rotary encoder based on photoelectric technology, generating 400 pulses per revolution in each phase, which in quadrature gives 1600 pulses. The robust aluminum and steel construction, with a maximum rotation speed of 5000 rpm, makes it ideal for precise measurements in automation and motion control systems.

The module is designed to support incremental encoders. It reads the rotation of the encoder and transmits the information via the I2C interface. Adafruit 4991

Absolute encoder module with 8421 (BCD) coding with 16 positions. Horizontal mounting. DFRobot DFR0722

360° encoder module with LED indicators. It communicates via the I2C interface (Gravity connector). DFRobot SEN0502

Module with a mechanical encoder and RGB backlight in the form of 24 colorful LEDs. It offers five buttons and a rotary encoder. For communication, it uses a Qwiic/Stemma QT connector or a connector compatible with the Breakout Garden system. It is perfect, for example, for controlling lighting. Pimoroni PIM673

Module with Grove connector equipped with AS5600 magnetic encoder with a resolution of 12-bit. It allows for non-contact measurement of the angle of rotation. The module has an analog/PWM output and an I2C interface. Seeed Studio 101020692

This set of two quadrature encoders for 20D extended-shaft motors provides precise rotational speed monitoring with 20 pulses per revolution of the motor shaft. The devices utilize a magnetic disc and Hall-effect sensors operating from 2.7-18V, and the digital outputs can be connected directly to a microcontroller. The encoders mount directly to the back of the motor, and the compact design and 6-pin JST PH connectors facilitate integration into robotic projects and control systems. Pololu 5660

This set of two quadrature encoders for 20D extended-shaft motors provides precise rotational speed monitoring with 20 pulses per motor revolution. The devices utilize magnetic disc and Hall-effect sensors operating from 2.7-18V, and the digital outputs can be connected directly to a microcontroller. The encoders mount directly to the back of the motor, and the compact design and 6-pin JST PH connectors facilitate integration into robotic projects and control systems. Pololu 5661

Module with an incremental encoder with a rotation range of 360° and a button. Communicates via a digital interface

Rotary encoder that enables precise detection of direction and number of revolutions using digital pulses. Equipped with an integrated button, five pins (CLK, DT, SW, VCC, GND) and a metal knob, it is ideal for user interfaces and device control. Thanks to its compatibility with Arduino and Raspberry Pi, durability up to 20,000 cycles and simple integration, it is suitable for educational and DIY projects. KY-040