

zł22.93 tax excl.
The module is designed to support incremental encoders. It reads the rotation of the encoder and transmits the information via the I2C interface. It has two built-in STEMMA QT connectors. Adafruit 5740
The module is designed to support incremental encoders. It reads signals from the rotary encoder and sends them to the connected main module via the I2C interface. It allows you to add an encoder to your project in an easy and quick way. there is no soldered encoder (not included), so the user can choose the appropriate element according to the pin layout used. The module is powered with a voltage of 3.3 V to 5 V, and communication takes place via the STEMMA QT connector or the 2.54 mm goldpin connector. The I2C address can be modified using 3 jumpers, which allows you to connect up to 8 modules on one bus. Full documentation is available on the product page.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
4-wire cable with a length of 50 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 4399
4-wire cable with a length of 100 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 4210
4-core cable with a length of 200 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 4401
No product available!
Absolute encoder module with 8421 (BCD) coding with 16 positions. Vertical mounting. DFRobot DFR0721
Module designed to operate four incremental encoders. It reads the encoder rotation and transmits the information via the I2C interface. Adafruit 5752
The module is designed to support incremental encoders. It reads the rotation of the encoder and transmits the information via the I2C interface. Adafruit 4991
Module with encoder and RGB backlight. It has an unlimited range of motion and is perfect for e.g. lighting control. Pimoroni PIM522
Module with an incremental encoder with a rotation range of 360° and a button. Communicates via a digital interface. DFRobot SEN0235
A compact digital rotary encoder module designed for simple and intuitive volume control in arcade and DIY projects. Ready to use without soldering, simply connect it to the "Encoder" port on the Picade Max USB Audio board. In addition to volume control, the encoder offers a mute function when the knob is pressed. Pimoroni PIM770
No product available!
Module with a digital rotary encoder controlled by the I2C interface. The potentiometer has RGB LED backlight. The encoder generates post-movement information with 24 levels per revolution and rotation direction detection. SparkFun DEV-15083
Module with a mechanical encoder and RGB backlight in the form of 24 colorful LEDs. It offers five buttons and a rotary encoder. For communication, it uses a Qwiic/Stemma QT connector or a connector compatible with the Breakout Garden system. It is perfect, for example, for controlling lighting. Pimoroni PIM673
No product available!
Module with Grove connector equipped with AS5600 magnetic encoder with a resolution of 12-bit. It allows for non-contact measurement of the angle of rotation. The module has an analog/PWM output and an I2C interface. Seeed Studio 101020692
Module with an incremental encoder with a rotation range of 360° and a button. Communicates via a digital interface
Incremental encoder (horizontal) with a resolution of 15 pulses per revolution. Equipped with a switch
No product available!
Rotary encoder that enables precise detection of direction and number of revolutions using digital pulses. Equipped with an integrated button, five pins (CLK, DT, SW, VCC, GND) and a metal knob, it is ideal for user interfaces and device control. Thanks to its compatibility with Arduino and Raspberry Pi, durability up to 20,000 cycles and simple integration, it is suitable for educational and DIY projects. KY-040
The EN11-VNB1BQ15 incremental encoder is a precise component for detecting the angle of rotation, with a quadrature output with a resolution of 20 pulses per revolution, ideal for position and speed control. Thanks to THT mounting, 5V power supply and low current consumption, it will be perfect for automation and robotics systems.
The EC11 is a precision rotary encoder with a pushbutton, generating 20 pulses per revolution, ideal for controlling user interfaces such as volume control or menu selection. With its compact design and easy mounting, it is suitable for a variety of DIY projects and automation applications.
The module is equipped with an AS5600 magnetic encoder with a resolution of 12-bit. It allows for non-contact measurement of the angle of rotation. The module has an analog/PWM output and an I2C interface.
Digital rotary encoder with green and red LED backlight. It has unlimited rotation and generates a digital signal in the form of a Gray code. SparkFun COM-15140
No product available!
The module is designed to support incremental encoders. It reads the rotation of the encoder and transmits the information via the I2C interface. It has two built-in STEMMA QT connectors. Adafruit 5740