![STEMMA QT I2C Quad Rotary Encoder - Module for 4 incremental encoders with NeoPixel LEDs](https://kamami.pl/84787-large_default/stemma-qt-i2c-quad-rotary-encoder-module-for-4-incremental-encoders-with-neopixel-leds.jpg)
![STEMMA QT I2C Quad Rotary Encoder - Module for 4 incremental encoders with NeoPixel LEDs](https://kamami.pl/84787-large_default/stemma-qt-i2c-quad-rotary-encoder-module-for-4-incremental-encoders-with-neopixel-leds.jpg)
zł34.61 tax excl.
Module designed to operate four incremental encoders. It reads the encoder rotation and transmits the information via the I2C interface. Adafruit 5752
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Module with ATtiny817 microcontroller designed to operate incremental encoders. It reads signals from the rotary encoder and sends them to the connected master module via the I2C interface. It allows you to add four encoders to your project easily and quickly. The module does not have an encoder soldered on (not included), so the user can choose the corresponding component himself according to the pin layout used (PEC11). In addition, there are NeoPixel LEDs on the board, which can be controlled via the I2C bus and used, for example, as feedback of the rotation angle. The module is powered by 3.3 V to 5 V and communication is via a STEMMA QT connector or a 2.54 mm goldpin connector. The I2C address can be modified using 3 jumpers, allowing up to 8 modules to be connected on a single bus. Full documentation is available on the product page.
The module is designed to support incremental encoders. It reads the rotation of the encoder and transmits the information via the I2C interface. Adafruit 4991
360° encoder module with LED indicators. It communicates via the I2C interface (Gravity connector). DFRobot SEN0502
Module with an incremental encoder with a rotation range of 360° and a button. Communicates via a digital interface. DFRobot SEN0235
Incremental encoder (horizontal) with a resolution of 15 pulses per revolution. Equipped with a switch
The module is equipped with an AS5600 magnetic encoder with a resolution of 12-bit. It allows for non-contact measurement of the angle of rotation. The module has an analog/PWM output and an I2C interface.
The module is designed to support incremental encoders. It reads the rotation of the encoder and transmits the information via the I2C interface. It has two built-in STEMMA QT connectors. Adafruit 5740
Digital rotary encoder with green and red LED backlight. It has unlimited rotation and generates a digital signal in the form of a Gray code. SparkFun COM-15140
Absolute encoder module with 8421 (BCD) coding with 16 positions. Vertical mounting. DFRobot DFR0721
No product available!
The module with an incremental encoder with channels A and B. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 103020030
No product available!
Module with an incremental encoder with a rotation range of 360° and a button. Communicates via a digital interface
No product available!
Module with Grove connector equipped with AS5600 magnetic encoder with a resolution of 12-bit. It allows for non-contact measurement of the angle of rotation. The module has an analog/PWM output and an I2C interface. Seeed Studio 101020692
The module is designed to support incremental encoders. It reads the rotation of the encoder and transmits the information via the I2C interface. Adafruit 4991
Absolute encoder module with 8421 (BCD) coding with 16 positions. Horizontal mounting. DFRobot DFR0722
No product available!
Module with encoder and RGB backlight. It has an unlimited range of motion and is perfect for e.g. lighting control. Pimoroni PIM522
Gravity: 360 Degree Hall Angle Sensor is a rotation angle sensor measuring a value in the range of 0-360 ° with an analogue output, powered by 5V. DFRobot SEN0221
Module with a mechanical encoder and RGB backlight in the form of 24 colorful LEDs. It offers five buttons and a rotary encoder. For communication, it uses a Qwiic/Stemma QT connector or a connector compatible with the Breakout Garden system. It is perfect, for example, for controlling lighting. Pimoroni PIM673
Module designed to operate four incremental encoders. It reads the encoder rotation and transmits the information via the I2C interface. Adafruit 5752