zł10,639.61
.png)
New products
New products New products
Gravity: 360 Degree Rotary Encoder - module with a 360° rotary encoder
ID: 1179236
5902186310360
zł49.94
Tax included
zł40.60 tax excl.
360° encoder module with LED indicators. It communicates via the I2C interface (Gravity connector). DFRobot SEN0502
Description
Module with a 360° rotary encoder and LED indicators. The user can configure the accuracy, thanks to which he can adjust the operation of the encoder to the needs of the project. The module communicates via the I2C interface (Gravity connector) and is supplied with the voltage from 3.3 V to 5 V. The user can connect several modules to one I2C bus. Perfect as a sensor to control the volume or brightness of lighting. Full documentation of the module with examples of use is available on the product page.
Features
- Rotation angle: 360 °
- Pulses per revolution: 20
- Interface: Gravity I2C connectors
- Service life: 30,000 ± 200 cycles
- Contact resistance: ≤100mΩ
- Insulation impedance: 100 MΩ
- Oscillation: (pressing 10ms)
- Working temperature: -30 ℃ to 80 ℃
- Accuracy adjustment: 1 to 51
- 1 - Illuminates one LED while rotating 2.5 turns
- 51 - illuminates one LED when rotating by 1 pulse
- Supply voltage: from 3.3 V to 5 V
- Dimensions: 37 x 37 mm
Kit contains
- Gravity module: 360 Degree Rotary Encoder
- Gravity I2C/UART cable
1179236
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
No product available!
Expansion board for Arduino, allows easy connection of XBee modules, has separate outputs for I2C, SPI and UART buses. The built-in 3.3V voltage stabilizer and operating mode switch make it easier to program the Arduino when the XBee module is connected to the sockets. DFRobot DFR0265
zł22.74
24h
Available quantity: 6
Available
Module with an incremental encoder with a rotation range of 360° and a button. Communicates via a digital interface. DFRobot SEN0235
zł13.44
24h
Available quantity: 30
Available
Module with 12-position rotary switch. It is supplied with the voltage ranging from 3.3 V to 12 V and has an analog output (Gravity connector). DFRobot SEN0156
zł23.67
Delivery date unknown
No product available!
Other products in the same category (16)
The set contains: MQ-5 Gas Sensor, Color Sensor, Flame Sensor, Hall Sensor, Infrared Reflective Sensor, Laser Sensor, Moisture Sensor, Rotation Sensor, Sound Sensor, Temperature-Humidity Sensor, Tilt Sensor, UV Sensor, Liquid Level Sensor. Modules compatible with Arduino
zł171.49
4 weeks
No product available!
Gravity: 360 Degree Hall Angle Sensor is a rotation angle sensor measuring a value in the range of 0-360 ° with an analogue output, powered by 5V. DFRobot SEN0221
zł282.63
24h
Available quantity: 3
Available
Module with an incremental encoder with a rotation range of 360° and a button. Communicates via a digital interface. DFRobot SEN0235
zł13.44
24h
Available quantity: 30
Available
Module with a digital rotary encoder controlled by the I2C interface. The potentiometer has RGB LED backlight. The encoder generates post-movement information with 24 levels per revolution and rotation direction detection. SparkFun DEV-15083
zł122.37
24h
Available quantity: 1
Available
Digital rotary encoder with green and red LED backlight. It has unlimited rotation and generates a digital signal in the form of a Gray code. SparkFun COM-15140
zł36.78
3 weeks
No product available!
The module is equipped with an AS5600 magnetic encoder with a resolution of 12-bit. It allows for non-contact measurement of the angle of rotation. The module has an analog/PWM output and an I2C interface.
zł10.60
24h
Available quantity: 136
Available
Module with Grove connector equipped with AS5600 magnetic encoder with a resolution of 12-bit. It allows for non-contact measurement of the angle of rotation. The module has an analog/PWM output and an I2C interface. Seeed Studio 101020692
zł26.72
4 weeks
No product available!
Absolute encoder module with 8421 (BCD) coding with 16 positions. Horizontal mounting. DFRobot DFR0722
zł19.26
24h
Available quantity: 2
Available
Absolute encoder module with 8421 (BCD) coding with 16 positions. Vertical mounting. DFRobot DFR0721
zł20.17
24h
Available quantity: 4
Available
Module with encoder and RGB backlight. It has an unlimited range of motion and is perfect for e.g. lighting control. Pimoroni PIM522
zł80.23
24h
Available quantity: 4
Available
The module is designed to support incremental encoders. It reads the rotation of the encoder and transmits the information via the I2C interface. Adafruit 4991
zł32.25
4 weeks
No product available!
360° encoder module with LED indicators. It communicates via the I2C interface (Gravity connector). DFRobot SEN0502
zł49.94
4 weeks
No product available!
Module with an incremental encoder with a rotation range of 360° and a button. Communicates via a digital interface
zł9.85
4 weeks
No product available!
The module is designed to support incremental encoders. It reads the rotation of the encoder and transmits the information via the I2C interface. It has two built-in STEMMA QT connectors. Adafruit 5740
zł28.20
24h
Available quantity: 1
Available
Module designed to operate four incremental encoders. It reads the encoder rotation and transmits the information via the I2C interface. Adafruit 5752
zł39.79
24h
Available quantity: 2
Available
Module with a mechanical encoder and RGB backlight in the form of 24 colorful LEDs. It offers five buttons and a rotary encoder. For communication, it uses a Qwiic/Stemma QT connector or a connector compatible with the Breakout Garden system. It is perfect, for example, for controlling lighting. Pimoroni PIM673
zł143.05
4 weeks
No product available!
360° encoder module with LED indicators. It communicates via the I2C interface (Gravity connector). DFRobot SEN0502