![ESP32 Feather V2 - WiFi and Bluetooth module with ESP32 chip (u.FL connector)](https://kamami.pl/79160-large_default/esp32-feather-v2-wifi-and-bluetooth-module-with-esp32-chip-ufl-connector-5438.jpg)
![ESP32 Feather V2 - WiFi and Bluetooth module with ESP32 chip (u.FL connector)](https://kamami.pl/79160-large_default/esp32-feather-v2-wifi-and-bluetooth-module-with-esp32-chip-ufl-connector-5438.jpg)
zł98.04 tax excl.
Module with WiFi Espressif ESP32. It offers 8MB Flash, 2MB PSRAM, LiPo charging circuit and RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5438
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Module with WiFi Espressif ESP32. It has 8 MB Flash memory, 2 MB external PSRAM memory, integrated WiFi 802.11 b/g/n and Bluetooth transceiver and a JST-PH 2.0 connector for connecting a LiPo battery. There is an RGB diode and a user button on the board. Feather can be easily integrated with sensors due to the available STEMMA QT connector (compatible with Qwiic).
The module offers great possibilities in the field of IoT systems and can be used both to control LEDs and to transfer data to a specific platform. FeatherS2 can also be programmed using the Arduino IDE, ESP-IDF or MicroPython. Full documentation is available on the product page.
Rod antenna 2.4G, gain 5dBi, connector type: IPEX/U.FL, RoHS
Wi-Fi antenna with a length of 100 mm. It operates in two frequency ranges: 2.4 and 5 GHz. Profit: 3 dBi; 4.5 dBi
Cable with USB typ A and USB typ C connectors, cable length 0.5 m. LANBERG
Cable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK
Cable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
4-wire cable with a length of 50 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 4399
4-wire cable with a length of 100 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 4210
4-core cable with a length of 200 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 4401
Advanced module with a 32-bit, single-core RISC-V processor. It has a built-in Bluetooth LE 5 and IEEE 802.15.4 (Thread, Zigbee 3.0) module. Perfect solution for IoT (Internet of Things) projects. Version with soldered connectors. Waveshare ESP32-H2-DEV-KIT-N4-M
No product available!
Module with WiFi Espressif ESP32-S2. It integrates two regulators, SPI Flash memory, LiPo charging circuit and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 4775
Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, the module has a built-in system for charging Li-Pol batteries. The plate has soldered goldpin connectors (female extension). Adafruit 3619
Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripherals - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, SPI, UART, I2S and I2C. SparkFun WRL-20168
Espressif ESP32-S2 WiFi chip module. It integrates a TFT LCD display, SPI Flash memory, LiPo charging circuit and RGB LED. It is equipped with a STEMMA QT connector. Adafruit 53
Development board based on Bluetooth Low Energy and IEEE 802.15.4 ESP32-H2-MINI-1 module. The ESP32-H2-MINI-1 integrates a 2.4GHz transceiver compliant with Bluetooth Low Energy and IEEE 802.15.4 technologies, supporting Bluetooth 5 (LE), Bluetooth Mesh, Thread, Matter, and Zigbee. Espressif Systems ESP32-H2-DevKitM-1-N4
Development board based on a microcontroller with a RISC-V core. It offers support for WiFi 6, Bluetooth 5 and Zigbee 3.0 and Thread (IEEE 802.15.4) protocols. It uses the ESP32-C6-WROOM-1-N8 module and is compatible with ESP32-C6-DevKitC-1-N8. Waveshare ESP32-C6-DEV-KIT-N8
Board with the WiFi Espressif ESP32-S2 module. It offers 4 MB of Flash memory and 2 MB of SRAM and an RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5325
Development kit with ESP32 WiFi and Bluetooth module and 0.96 "OLED display. It has a built-in Li-Pol charger module and a USB-UART converter function. ModOLEDESP32_V2.0_TTGO
Robot controller dedicated to Totem sets. It is based on the ESP32 chip (WiFi and Bluetooth module), equipped with a DC motor and servo driver, RGB diodes and an IMU sensor. With DC adapter. Totem TE-X4-KIT2
Development board with ESP32 chip with WiFi and Bluetooth communication. Equipped with a microSD card slot, USB Type-C connector for programming and Ardunio Uno Rev3 compatible connectors and Qwiic connector. SparkFun WRL-19177
Espressif ESP32-C3 WiFi module board. It offers 4 MB of Flash memory and 400 kB of SRAM. It is equipped with a USB type C connector and a WiFi/BT antenna. Seeed Studio 113991054
M5Stack series kit equipped with ESP32 and camera with OV2640 sensor. It has a built-in W5500 chip and can be powered by the RJ45 (PoE) connector. M5Stack U121
M5Stack series development kit equipped with ESP32 chip. It has a built-in microphone and is dedicated to applications that require speech recognition. M5Stack K117
Evaluation kit with WiFi/Bluetooth module BLE ESP32-WROOM-32U. The board is equipped with a USB-UART converter, which through the microUSB connector allows you to power and program the board. Espressif ESP32-DevKitC-32U
Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. Adafruit 5398
Module with WiFi Espressif ESP32. It offers 8MB Flash, 2MB PSRAM, LiPo charging circuit and RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5438