.png)
ESP32-P4 development board Smart 86 Box with touch panel, WiFi and Bluetooth - Waveshare 31416
ID: 1198463
5902186322523
zł198.41
Tax included
zł161.31 tax excl.
ESP32-P4-WIFI6-Touch-LCD-4B is a control panel with a 4″ IPS display, Wi-Fi 6 and Bluetooth 5 support, 5-point touch, and advanced audio capabilities, designed for smart installations, HMI, and IoT devices. The module supports the development of interactive user interfaces in modern automation systems.
Description
The ESP32-P4-WIFI6-Touch-LCD-4B development board features a 4″ IPS touchscreen with a 720×720 resolution, designed for creating modern control panels and user interfaces in IoT applications and HMI systems. It is based on the ESP32-P4 chip with 32-bit RISC-V cores and integrates the ESP32-C6 module for Wi-Fi 6 and Bluetooth 5 (LE) connectivity. Equipped with 32 MB PSRAM and 32 MB Flash memory, the board offers a wide range of peripherals, including MIPI-CSI interface, USB 2.0 OTG port, speaker connector, two microphones with echo cancellation, TF card reader, and UART interface. The 5-point capacitive touch enables intuitive panel operation. The device supports voice interaction and is compatible with AI platforms. It is designed for installation in a standard 86 mm wall box.
Features
- Display: IPS, 4″, 720×720 px
- Touch type: capacitive, 5-point (GT911)
- Brightness: 400 cd/m²
- Contrast: 1200:1
- Viewing angle: 170°
- Processor: ESP32-P4 (RISC-V, dual-core + single-core)
- Wireless communication: ESP32-C6-MINI (Wi-Fi 6, Bluetooth 5 LE, SDIO interface)
- Memory: 32 MB PSRAM + 32 MB NOR Flash
- Ports: USB 2.0 OTG, UART (USB-C), TF card slot (SDIO 3.0)
- Audio: ES8311 codec, 2× microphones (with EC, ES7210 chip), speaker connector
- Interfaces: MIPI-CSI, I²C, GPIO, RTC, BOOT and RESET buttons
- Enclosure dimensions: 86.5 × 86.5 mm
- Display area: 71.93 × 71.93 mm
- Mounting: compatible with 86-type electrical wall box (recommended depth ≥33 mm)
1198463
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Other products in the same category (16)
Board with the WiFi Espressif ESP32-S2 module. Offers 4MB Flash and 8MB SRAM. Leads are compatible with HAT modules for Raspberry Pi Pico. Waveshare 21178
zł51.06
24h
Available quantity: 9
Available
Board with the WiFi ESP-12F (ESP8266) module and a 5 V relay. Equipped with an AC adapter
zł47.90
24h
Available quantity: 4
Available
Board with the WiFi Espressif ESP32-S2 module. It offers 4 MB of Flash memory and 2 MB of SRAM and an RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5325
zł69.02
24h
Available quantity: 2
Available
Module with WiFi Espressif ESP32-S2. It integrates the TFT LCD display, SPI Flash memory, LiPo charging circuit and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5300
zł144.23
24h
Available quantity: 2
Available
Board with WiFi Espressif ESP32-S2 module and u.FL connector. It offers 4 MB of Flash memory and 2 MB of SRAM and an RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5348
zł66.17
24h
Available quantity: 2
Available
Module with WiFi Espressif ESP32. It offers 8MB Flash, 2MB PSRAM, LiPo charging circuit and RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5400
zł103.28
24h
Available quantity: 1
Available
Module with WiFi Espressif ESP32-S2. It has 4MB Flash, 2MB PSRAM, and integrates a BME280 sensor, LiPo charging circuit, and RGB LED. Equipped with a STEMMA QT connector. Adafruit 5303
zł149.90
24h
Available quantity: 1
Available
Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5323
zł96.43
24h
Available quantity: 2
Available
M5Stack series development kit equipped with ESP32-C3. It will work in IoT-related projects, as a STEM educational module or in Smart Home devices. M5Stack K122
zł50.75
24h
Available quantity: 3
Available
M5Stack series development kit equipped with ESP32-C3. It will work in IoT-related projects, as a STEM educational module or in Smart Home devices. Set includes 5 M5Stack C056-B
zł209.00
24h
Available quantity: 1
Available
M5Stack series development kit equipped with ESP32-PICO-D4. It will work in IoT-related projects, as a STEM educational module or in Smart Home devices. M5Stack K051-B
zł116.90
24h
Available quantity: 3
Available
Board with WiFi and Bluetooth Espressif ESP32-C3 module. It offers 4MB Flash and 400KB SRAM and a LiPo charging circuit. The set includes an expansion board with a display connector. DFRobot DFR0868
zł37.80
24h
Available quantity: 6
Available
Module with WiFi Espressif ESP32. It offers 8MB Flash, 2MB PSRAM, LiPo charging circuit and RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5438
zł106.16
24h
Available quantity: 1
Available
Tile with WiFi module and Bluetooth Classic + BLE ESP32 Pico. It offers 8 MB of Flash memory and 2 MB of PSRAM and an RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5395
zł78.12
24h
Available quantity: 3
Available
Board with the WiFi Espressif ESP32-S3 module. It offers 8 MB of Flash memory and 512 KB of SRAM and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5426
zł63.21
24h
Available quantity: 2
Available
Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5477
zł94.71
24h
Available quantity: 5
Available
ESP32-P4-WIFI6-Touch-LCD-4B is a control panel with a 4″ IPS display, Wi-Fi 6 and Bluetooth 5 support, 5-point touch, and advanced audio capabilities, designed for smart installations, HMI, and IoT devices. The module supports the development of interactive user interfaces in modern automation systems.