Pico-CAN-B - CAN converter expansion board for Raspberry Pi Pico

Development board with LCD display designed to work with the Raspberry Pi Pico. It has a built-in audio connector, micro SD slot, photoresistor, RGB LED, buzzer and battery charging circuit. Waveshare Pico-Eval-Board

Module with a 3-color e-Paper display with a diagonal of 7.5" and a resolution of 800x480 px. Communication via the SPI interface. Waveshare Pico-ePaper-7.5-B

The PMSA003 air quality sensor module to work with the Raspberry Pi Pico. It allows for a analysis of the amount of pollutants in the environment based on the concentration of PM1.0, PM2.5 and PM10 particles. SB Components 21819

1-channel module with a relay designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21277

A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and four sets of male strips 2x20 pins. Pimoroni PIM555

L76B based GNSS module that can work with GPS, BDS and QZSS systems. Communication via the UART interface. Waveshare Pico-GPS-L76B

Module with a 2-channel driver for DC motors L293D designed to work with the Raspberry Pi Pico. It can work with a voltage from 6 to 12 V and a current of up to 600 mA. SB Components 21468

Module with an IPS LCD display with a diagonal of 7" and a resolution of 1024x600 pixels dedicated to Raspberry Pi Pico boards. It uses the DVI interface for communication. Waveshare PICO-DVI-7inch

The module with the UART-RS232 converter is designed to work with the Raspberry Pi Pico. It has a built-in SP3232EEN chip and enables data transmission between the UART interface and the RS232 device. Waveshare Pico-2CH-RS232

Monochrome VGA camera module with HM0360 sensor working with Raspberry Pi Pico. It uses 1 bit video interface and I2C to configure the registers. ArduCAM B0319

A module with a barcode and QR scanner designed to work with the Raspberry Pi Pico. It allows you to read one-dimensional and two-dimensional codes using the intelligent image recognition algorithm. SB Components 22441

Module with e-Paper display with a diagonal of 2.13" and a resolution of 250x122 px. Communication via the SPI interface. Waveshare Pico-ePaper-2.13

A set of goldpin male connectors intended for Raspberry Pi Pico boards. The set includes two 20-pin strips and one 3-pin strip with a pitch of 2.54 mm. Soldered connectors enable easy connection of expansion modules and other accessories

Module with a color LCD IPS display with a screen diagonal of 1.14" and a resolution of 240x135 px, dedicated to the Raspberry Pi Pico. It communicates via the SPI interface. Pimoroni PIM543

The expansion board for the Raspberry Pi Co allows you to connect to Pico HAT overlays designed for full-size Raspberry boards, and KAmod I2C series modules.

Module with BME688 chip, microphone and LTR-559 light intensity. Equipped with a display, it is dedicated to the Raspberry Pi Pico/Pico W. Pimoroni PIM635