ESP32-S3-Pico-Sensor-Kit-B - set with sensors and ESP32-S3-Pico-M

Description

Starter kit for learning electronics and programming. It consists of an expander with Raspberry Pi Pico and JST PH2.0 connectors and an ESP32-S3-Pico-M board. The user has 15 expansion modules on which to find the most commonly used sensors and electronic components, such as display, buttons, buzzer temperature and humidity sensors, microphone, gas sensor, IMU, potentiometer, motor controller and IR receiver and transmitter.

The ESP32-S3-Pico-M board is a module with a dual-core Xtensa 32-bit LX7 processor clocked at 240 MHz, integrated RAM, ROM, Flash and PSRAM, and 2.4 GHz Wi-Fi and Bluetooth LE 5. The module is equipped with a ceramic antenna and an MP28164 3.3 V 2 A DC-DC converter for optimised power supply and low power consumption. The board also has 27 GPIO pins, including ADC, UART, SPI, I2C, PWM, and its pin spacing is compatible with Raspberry Pi Pico HAT modules. It provides a Full-Speed USB OTG interface, LCD interface (8-bit serial RGB/8080/6800), DVP camera interface (8-bit - 16-bit).

The kit is designed for beginners who want to learn the basics of programming. It has the form of one large board on which the individual modules are placed. This form factor keeps things tidy and allows the kit to be used without the need to solder components or use an additional contact board. Should the user wish to use the modules for another project, he or she can easily break out one of the boards and connect it using the supplied wires. Full documentation with examples is available on the product page.

Features

• Modular design
• Expander with Raspberry Pi Pico connectors and JST PH2.0 connectors for connecting a 3.7V LiPo battery and expansion modules
• ESP32-S3-Pico-M board
  • Xtensa 32-bit LX7 240 MHz dual-core processor
  • Integrated 512 kB SRAM, 384 kB ROM, 16 MB Flash, 2 MB PSRAM
  • Wi-Fi 2.4 GHz - 802.11b/g/n
  • Bluetooth LE 5, Bluetooth Mesh
  • Ceramic antenna
  • MP28164 3.3 V 2 A DC-DC converter
  • Optimised power supply for low power consumption
  • Power supply: USB Type C
  • Built-in USB OTG Full-Speed interface, LCD interface (8-bit RGB/8080/6800 serial), DVP camera interface (8-bit - 16-bit)
  • 27 GPIO pins, including ADC, UART, SPI, I2C, PWM
  • Pin spacing compatible with Raspberry Pi Pico HAT modules
  • Dimensions: 51 x 21 mm
• 15 expansion modules:
  • 1.5" OLED display, 128x128 px, SSD1327, SPI and I2C
  • QMI8658C sensor module (3-axis accelerometer, 3-axis gyroscope)
  • SGP40 VOC sensor module, 0-1000ppm (ethanol), I2C (0x59)
  • Module with potentiometer
  • Module with photoresistor
  • Microphone and operational amplifier module
  • RGB LED module WS2812B
  • Passive buzzer module
  • Module with IR receiver
  • Module with IR transmitter
  • Push-button module
  • LED 10mm module
  • SHTC3 temperature and humidity sensor module
  • Module with EEPROM AT24C04 2 Kbit
  • Module with motor controller (PCA9685 and TB6612FNG chip)
• Possibility to break out the modules and use them separately
• Examples for Raspberry Pi Pico in C/C++ and MicroPython
• Dimensions: 175 x 139.5 mm

Kit contains

• Pico-Sensor-Kit-B
• ESP32-S3-Pico-M
• IR remote control
• 15 x PH2.0 cable with 4-pin plug
• 5 x PH2.0 4-pin cable
• USB type A to USB type C cable 1m