1.8" Color LCD Display Module 128x160 - Waveshare 13892

Module with a 1.44 "color liquid crystal display and 128 x 128 pixel resolution The display has a built-in ILI9163C driver. Thanks to the pin connector, the module can be easily attached to the contact plate or wires 1.44 \'SPI 128 * 128 V2.1

RGB LCD display module with 0.96 "diagonal, 160x80 pixel resolution, SPI interface, LED backlight. Waveshare 15868

128x64 pixel graphic display, STN NEGATIVE BLUE, with white LED backlight. Display based on RA8808 driver compatible with KS0108 with the possibility of control via SPI interface. LCD-EG-128064H-BHW W/B-E6

Graphical display 128x64 pixels, 92x53.6 mm, extended temperature range, controller: ST7565R

LCD graphic display 128x64, KS0108 LCD controller, NEGATIVE BLUE, LED backlight (white), 1x20 pin header for evaluation boards

A module with a 1.83" IPS color LCD display with a resolution of 240x280 pixels. It has rounded corners and uses the NV3030B controller (SPI interface). Waveshare 1.83inch LCD Module

2.2" 18-bit color TFT LCD display with microSD card breakout - ILI9340

15.6" portable touch screen monitor. The monitor is equipped with HDMI interface for image display and USB Type-C for image display and touch screen. High resolution 1920x1080 pixels. Waveshare 15.6inch FHD LCD (for EU)

Graphic LCD 122x32, LED backlight (negative blue), enhanced temperature range, PCB 80x36mm, RoHS

Graphic LCD 240x64 with LED backlight (White), FSTN, character generator, negative voltage generator, T6963C controller

LCD graphic display with 128 x 64 resolution, black content, white backlight, based on RA8808 controller.

The 1.3 "LCD display and 168 x 144 pixel resolution is a combination of an e-ink display (e-paper) with LCD display, which is characterized by extremely low energy consumption by the eInk system and fast refresh of the LCD display. Adafruit 3502

Graphic LCD (Nokia 5110)

1.9inch Touch LCD is a compact IPS display with capacitive touch, designed for projects based on microcontrollers and single-board computers. Thanks to the SPI and I2C interfaces and built-in logic level conversion, it allows easy integration with platforms such as Raspberry Pi, ESP32, STM32, and Arduino.

IPS display module with a diagonal of 1.69" and rounded corners with a resolution of 240(H) x 280(V), with the ST7789 controller. It is characterized by a display area of 28 x 32.6 mm, operating temperature from -20 to 70°C and a logic voltage of 3.3 V

Graphic display 320x240 pixels with Touch panel, 160x109mm, negative blue FSTN, SED133X controller - character generator