zł19.81 tax excl.
0.96" OLED display in yellow and blue, based on the SSD1315 controller, equipped with a Grove interface supporting SPI and I2C communication and powered from 3.3–5 V. Seeed Studio 104020249
Grove OLED Yellow&Blue Display 0.96" is an OLED display module intended for embedded systems and prototyping projects based on microcontroller platforms. The display uses the SSD1315 controller and a 0.96" OLED panel with a resolution of 128 × 64 pixels, featuring a dual-color active area divided into yellow and blue sections. The absence of backlighting supports low power consumption, which is suitable for battery-powered applications.
The module supports both I2C and SPI communication interfaces, enabling integration with a wide range of microcontrollers and development boards. The Grove connector simplifies system connection without the need for soldering. The display is used for presenting text data, icons, charts, and status information in IoT devices, measurement systems, and educational projects.

GND: Ground reference of the circuit.
VCC: Supply voltage from 3.3 V to 5 V.
SCL: I2C bus clock line.
SDA: I2C bus data line.
Manufacturer
Responsible person
Module with temperature sensor MCP9808. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020556
No product available!
Module with LCD display 16x2 characters with RGB backlight. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 104030001
Module with a 12-channel capacitive touch sensor MPR121. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020872
No product available!
Module with temperature and humidity sensor DHT11. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020011
Ultrasonic distance sensor with a range from 3 to 350 cm. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020010
Module with MLX90614 temperature sensor with a measurement accuracy of 0.2°C and a viewing angle of 5°. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020894
No product available!
Module with a MLX90641 thermal imaging camera with a 16x12 field matrix and a 110° viewing angle. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020892
Grove vertical socket for surface mounting, 4-pin, pitch 2.0 mm. Set of 20 pieces. Seeed Studio 114020163
Module with an infrared sensor AMG8833 (matrix 8x8) designed to measure temperature. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020557
No product available!
Doppler radar module with 24GHz BGT24LTR11 transceiver. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 109020021
No product available!
MEMS SPU0414HR5H-SB analog microphone module. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020852
LM386 audio amplifier module in a set with a loudspeaker. The board is equipped with a Grove connector and is controlled by a PWM signal. Seeed Studio 101020853
No product available!
Air530Z GPS module with external antenna. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 109020022
Module with a pressure sensor DPS310 with high measurement accuracy. The board is equipped with a Grove connector and communicates via the I2C or SPI interface. Seeed Studio 101020812
Module for recording sounds, which can store recordings up to 20 seconds. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 107020007
No product available!
Module with four gas sensors that allow the detection of CO, NO2, alcohol and volatile organic compounds (VOC). The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020820
0.96" OLED display in yellow and blue, based on the SSD1315 controller, equipped with a Grove interface supporting SPI and I2C communication and powered from 3.3–5 V. Seeed Studio 104020249