zł576.86 tax excl.
Industrial cellular router for communication with automation equipment and M2M systems; 4G LTE Cat 4 up to 150 Mbps; 3G and 2G; Dual SIM with automatic switching; RS232 and RS485; WiFi 4; 1 x WAN and 1 x LAN 10/100 Mbps; active 802.3af PoE In and passive PoE; 9-57 VDC power supply; microSD slot up to 2 TB; Modbus RTU/TCP, DNP3, DLMS/COSEM, OPC UA, BACnet and MQTT; RutOS operating system; Teltonika RMS support. Teltonika RUT206
Industrial cellular router designed for integrating automation equipment using RS232 and RS485 interfaces with IP networks and IoT/M2M systems. Teltonika RUT206 supports 4G LTE Cat 4 with download speeds up to 150 Mbps and upload speeds up to 50 Mbps, as well as 3G and 2G networks. Two Mini SIM slots enable automatic SIM switching in cases including weak signal, roaming, network loss or data connection failure. The router also provides WiFi 4 802.11b/g/n with support for up to 50 simultaneous clients, one 10/100 Mbps WAN port, one 10/100 Mbps LAN port and RS232 and RS485 interfaces. An internal microSD slot supports cards with capacities up to 2 TB, providing expandable local data storage.
OpenWrt-based RutOS provides routing, load balancing, firewall, VLAN, VPN, Hotspot 2.0 and support for Modbus RTU/TCP, DNP3, DLMS/COSEM, OPC UA, BACnet and MQTT. The RS485 interface operates in half-duplex mode with a 2-wire connection, while RS232 operates without hardware flow control. The router can be powered from 9-57 VDC, via active 802.3af PoE In or passive 16-57 VDC PoE, providing several power options for industrial installations. An anodized aluminium housing, an operating temperature range from -40°C to 75°C and remote management through Teltonika RMS support deployment in industrial automation, telemetry, measurement systems, machine control and distributed IoT and M2M installations.
Data sheet
Compact mounting kit designed for installing compatible Teltonika Networks devices on a standard 35 mm DIN rail. The holder is made of PP FH44 material, while its compact dimensions of 70 x 25 x 14.5 mm facilitate installation of routers, modems, gateways and switches in control cabinets and industrial systems. Teltonika PR5MEC11
Metal mounting kit designed for installing compatible Teltonika Networks devices on a standard 35 mm DIN rail. The holder is made of low-carbon steel, while its dimensions of 65.2 x 44.2 x 1.5 mm allow routers, modems, gateways and switches to be installed in control cabinets, distribution boards and industrial installations. Teltonika PR5MEC00
Roof-mount LTE MIMO antenna designed for use with compatible Teltonika Networks routers and devices. It supports frequency ranges of 698-960 MHz and 1710-2690 MHz, while two 3 m RG174 cables are terminated with SMA Male connectors. The housing has an IP65 ingress protection rating, excluding the cable outlet, and is UV resistant. Teltonika PR1KCL25
WiFi rod antenna designed for routers, access points and networking devices operating in the 2.4GHz band. Supports frequencies of 2400-2483MHz, providing 5dBi antenna gain, vertical polarization and 50Ω impedance. Equipped with an RP-SMA male connector and a hinged design allowing 90° positioning. Overall length of 195mm and IP33 protection rating. Teltonika PR1URF51
9W AC/DC power adapter designed for powering Teltonika networking and industrial devices. Provides 9V DC output voltage and 1A output current with a 100-240V AC input. Equipped with a European Type C plug and a 2m cable terminated with two wires fitted with ferrules. Features short-circuit protection and meets DoE Level VI energy efficiency requirements. Teltonika PR3PREU6
r cellular routers and modems. Supports frequency ranges of 698-960MHz and 1710-2690MHz, providing 4dBi antenna gain, vertical polarization and 50Ω impedance. Equipped with an SMA male connector and a hinged design allowing adjustable positioning. The antenna measures 197mm in length and features an IP33 protection rating. Teltonika PR1US440
Adhesive LTE antenna designed for use with cellular routers and modems. Supports frequency ranges of 824-960MHz and 1710-2170MHz, providing 2dBi antenna gain and 50Ω impedance. Equipped with a 3m RG174 cable terminated with an SMA male connector. IP50 protection rating and adhesive mounting. Teltonika PR1AS420
Compact LTE rod antenna with a straight SMA male connector, designed for cellular routers and modems. Operates in the 700-2700MHz frequency range, providing 5dBi gain, vertical polarization and 50Ω impedance. The antenna measures 54mm in length. Teltonika PR1CS450
The industrial cellular router provides 4G LTE Cat 6 connectivity, five Gigabit Ethernet ports, and dual-band Wi-Fi 5. Integrated eSIM support, Wi-Fi Mesh, Fast Roaming, and extensive network interfaces support deployment in IoT, transport, robotics, roadside infrastructure, and other distributed industrial systems. Teltonika RUTM16
The industrial cellular router provides global 5G connectivity, Wi-Fi 5, and wired Ethernet communication. Dual SIM, integrated eSIM, automatic failover, and PoE support enable deployment in compact IoT and IIoT installations requiring redundant network access. Teltonika RUTM20
No product available!
The industrial cellular router provides 5G SA/NSA connectivity with backward compatibility for 4G LTE Cat 19 and 3G networks. Dual SIM, eSIM, two Gigabit Ethernet ports, dual-band Wi-Fi, and automatic failover support high-speed and redundant connectivity in IoT and M2M installations. Teltonika RUTM30
The industrial cellular router provides 5G SA/NSA connectivity with backward compatibility for 4G LTE Cat 19/18 networks. Dual SIM support, five Gigabit Ethernet ports, Wi-Fi, GPS, and automatic failover enable deployment in industrial networks requiring high-speed data transmission and connection redundancy. Teltonika RUTM50
No product available!
The industrial cellular router uses two 5G modems and supports both SA and NSA architectures. Dual SIM, eSIM, Multi-WAN, load balancing, five Gigabit Ethernet ports, and Wi-Fi 5 support networks requiring high-speed data transmission, redundancy, and multiple independent WAN connections. Teltonika RUTM52
The industrial cellular router provides 5G SA/NSA connectivity with LTE Cat 19 support. Dual SIM, five Gigabit Ethernet ports, dual-band Wi-Fi, GNSS, and USB support integration with industrial, IoT, and redundant network installations. Teltonika RUTM54
The industrial cellular router provides 5G, 4G LTE, Wi-Fi 5, and Gigabit Ethernet connectivity. RS232 and RS485 interfaces, Dual SIM, eSIM, and automatic failover support integration with industrial automation systems and equipment using serial communication. Teltonika RUTM55
The industrial cellular router integrates two independent cellular modems: one 5G modem and one 4G LTE Cat 4 modem. Dual SIM, eSIM, load balancing, Wi-Fi 5, and five Gigabit Ethernet ports support redundant network architectures in IoT and industrial automation systems. Teltonika RUTM56
No product available!
The industrial cellular router provides 5G connectivity in both SA and NSA architectures with LTE Cat 19 DL / Cat 18 UL support. Dual SIM, five Gigabit Ethernet ports, GNSS, USB, and industrial communication protocols support deployment in industrial, transport, and IoT systems requiring high-speed and redundant network access. Teltonika RUTM59
No product available!
The industrial wired router provides four Gigabit Ethernet ports together with routing, VLAN, VPN, and network management functions. A quad-core CPU, 256 MB RAM, support for up to 128 VLANs, and RutOS enable deployment in industrial Ethernet networks and IoT infrastructure. Teltonika RUTX08
The industrial cellular router provides 4G LTE Cat 6 connectivity, four Gigabit Ethernet ports, and Dual SIM support. Failover functions, GNSS, USB, and industrial communication protocols support deployment in IoT, automation, and network installations requiring redundant cellular connectivity. Teltonika RUTX09
The industrial cellular router provides 4G LTE Cat 6 connectivity, four Gigabit Ethernet ports, dual-band Wi-Fi 5, and Bluetooth Low Energy. Dual SIM, GNSS, automatic failover, and support for up to 128 VLANs enable deployment in industrial, IoT, and redundant network applications. Teltonika RUTX11
The industrial cellular router uses two independent LTE Cat 6 modems, allowing two simultaneous cellular connections. Load balancing, Dual SIM, five Gigabit Ethernet ports, Wi-Fi 5, Bluetooth Low Energy, and GNSS support applications requiring redundant and highly available network connectivity. Teltonika RUTX12
No product available!
The industrial cellular router provides LTE-A Cat 12 connectivity, five Gigabit Ethernet ports, and dual-band Wi-Fi 5. Dual SIM, automatic failover, Bluetooth Low Energy, and support for up to 128 VLANs enable deployment in industrial networks, IoT systems, and applications requiring high-speed and redundant connectivity. Teltonika RUTX14
The industrial cellular router provides 5G SA/NSA connectivity with backward compatibility for 4G LTE Cat 20 and 3G networks. Dual SIM, five Gigabit Ethernet ports, dual-band Wi-Fi, GNSS, and automatic failover support industrial, IoT, and redundant network applications. Teltonika RUTX50
No product available!
The industrial rack-mounted router provides LTE Cat 6 connectivity, Gigabit Ethernet, SFP, and dual-band Wi-Fi 5. Dual SIM, redundant power inputs, WAN failover, USB, and a dedicated console port support network installations requiring high availability and integration with fibre infrastructure. Teltonika RUTXR1
No product available!
Industrial cellular router for communication with automation equipment and M2M systems; 4G LTE Cat 4 up to 150 Mbps; 3G and 2G; Dual SIM with automatic switching; RS232 and RS485; WiFi 4; 1 x WAN and 1 x LAN 10/100 Mbps; active 802.3af PoE In and passive PoE; 9-57 VDC power supply; microSD slot up to 2 TB; Modbus RTU/TCP, DNP3, DLMS/COSEM, OPC UA, BACnet and MQTT; RutOS operating system; Teltonika RMS support. Teltonika RUT206